Bill,
If you are using VAC 3.10 it will crash. With VAC 3.11 it will not. It
isn't a PowerSDR issue.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Eric,
Is there a place where we can see what in on the current bug list so
those of us who find things don't reinvent the wheel over and over?
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL
.
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045 (FAX)
919.215.6375 - cell
PGP public key available at all public KeyServers
Skype: kg4rzy
:
http://flex-radio.com/forums/viewtopic.php?p=6376#6376
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee A Crocker
Sent: Friday, February 10, 2006 9:22 AM
(32-bit) All patches installed
Soundcard: Delta 44
.NET version 2.0
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045 (FAX)
919.215.6375 - cell
PGP public key available at all public KeyServers
it
seems that there is no flash of data. In all cases, when Preview 14
is started, MixW crashes.
I never see this flash of data with Preview 13.
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045
OK, it may not be a problem after all. I rebooted my computer (shuts
down VAC) and now all seems to be working OK. Windows. Go figure.
There is a 3.12 version of VAC. Anyone know what was fixed between
versions 3.11 and 3.12?
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical
What soundcard are you using? I had this happen when using a Delta 44
and the issue was that some other windows program changed the variable
signal levels to a value that the SDR didn't like. P14 does an auto set
of the signal levels for the Firebox and Delta 44.
-Tim
---
Tim Ellison ( [EMAIL
Jim,
I am one of the first to report the CPU increase issue. I am using a
NVIDIA GeForce 6200 (latest drivers DirectX).
Turning off write combing made little difference. Eliminating hardware
acceleration made CPU utilization go higher.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated
.
Between work and WPX RTTY Contest this weekend, I'm a little tired.
BTW, the SDR1000 did a fine job during the contest. No CAT problems and
I worked every one I called without an amp.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original
Skype:
Open Skype.
Select Tools in the Menu bar
Select Options
Select Adjust Sound Devices
Change Audio in to Delta 44 3/4
Change Audio out to Delta 44 1/2
Click on SAVE.
Use this URL for testing:
http://www.skype.com/help/guides/soundsetup.html
TeamSpeak:
Open TeamSpeak
Select Settings in
How about a 3 to 5 band parametric EQ and then the center frequency
choice is a moot point?
Is it too difficult to do?
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
, co this is an advantage. Now, fully
understanding the First Law of Thermodynamics (you don't get something
for nothing), what are the disadvantages to using higher sampling rates?
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
am fortunate to have Access so I can do DB surgery, but I suspect a
lot of folks who don't or are not comfortable with performing a DB
frontal lobotomy.
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25
I just noticed this:
VAC Mono/Stereo selection - I can engage and disengage the mono/stereo
option without crashing PowerSDR, but if MixW is running at the same
time, I receive an PortAudio Error - Unanticipated Host error.
PowerSDR recovers and does not crash.
-Tim
---
Tim Ellison mailto
THEN
the settings on the ends of the cables MAY be different BUT ONLY
if PowerSDR is started first and left running.
Bob
Tim Ellison wrote:
I just noticed this:
VAC Mono/Stereo selection - I can engage and disengage the mono/stereo
option without crashing PowerSDR, but if MixW is running
I am not experiencing any of these issue with Preview 15.
But...I'm using a D44 and allowed P15 to create a new database.
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
. (This is the
clean part)
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee A Crocker
Sent: Tuesday, February 21, 2006 7:52 PM
To: FlexRadio@flex-radio.biz
Make sure that the Delta 44 sound card has the correct variable signal
levels. The later preview version have logic that sets this
automatically.
Check the seating of the I/Q input cable (from the radio to the
soundcard) If you are using the Hosa cables, sometimes the don't seat
well.
What are
-Original Message-
From: Eric Ellison [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 23, 2006 8:11 PM
To: [EMAIL PROTECTED]; 'KD5NWA'; Tim Ellison
Cc: FlexRadio@flex-radio.biz
Subject: RE: [Flexradio] Sampling rates greater than 48K question
Eric1
Solution? Drag and drop bandwidth. I
Hummm. A 68 Hz tone with 60Hz AC powering the computer. Those are
fairly close in frequency. Could it be a AC polarity or grounding
issue?
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL
Eric,
If you have VFO lock on, you can change the frequency by entering in a
numeric frequency. Shouldn't locked be locked?
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045 (FAX)
919.215.6375
crashes and allow the
audio to come through unmodified (HI HI)
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045 (FAX)
919.215.6375 - cell
PGP public key available at all public KeyServers
Skype
solve the conundrum of
reconfiguring VAC every time you select a different mode.
So wadda ya think?
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045 (FAX)
919.215.6375 - cell
PGP public key
of thought. Sleep deprivation spawns some creative
thinking sometimes.
Comments, opinions or criticisms?
(I'd love to hear Eric's thoughts on this.)
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: richard allen
FYI,
Here are the Mia MIDI specs:
Software Features
* 2 balanced 1/4 analog inputs with 106dB (A-weighted) dynamic range
* 2 balanced 1/4 analog outputs with 106dB (A-weighted) dynamic range
* MIDI in/out
* 24 bit coaxial S/PDIF digital I/O
* Supports full duplex 4 channel in, 4 channel out
Include the PowerMate in that too.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee A Crocker
Sent: Wednesday, March 01, 2006 5:05 PM
To: FlexRadio@flex
well sums it up.
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: Steve Nance [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 01, 2006 7:57 PM
To: Tim Ellison
Subject: RE: [Flexradio] Building a Flexible
How did you remove the Audigy card and driver? It sounds like the
driver didn't get completely unloaded.
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
And your version of Windows is?
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bill Nagle
Sent: Friday, March 03, 2006 12:32 PM
To:
) with the OX is such close
proximity or does the heat that the DDS gives off act as sort of a
device that provide a more stable ambient temperature for the XO?
Any thoughts or comments?
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC
Jerry,
Have you done the sound card calibration as noted in the Operating
manual. I have a problem where the PA calibration was 10 above and the
sound card was putting out too much gain.
It is the test where toy measure the sound card voltage.
-Tim
---
Integrated Technical Services
You
I know the Delta 44 has a bets 64-bit driver, but I can't speak for the
stability of using it on a 64-bit OS. It loaded on my 32-bit OS with my
64-bit processor and works without any problems.
PowerSDR shouldn't be a problem unless Windoze thunking has problems.
You'll find the biggest
Here you go.
Some versions of Windows XP look for devices by periodically writing to
the port. A registry key can disable this behavior.
The following registry setting disables the port writes:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Parport\Parameters
]
Mike,
I see 10dB increase in the noise floor too when changing from Preview 15
to 16 with a dummy load, so there must be some antenna left :-)
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Larry Loen
Sent: Wednesday, March 08, 2006 9:39 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Build Process
Please disregard this e-mail. Too many messages open at one time :-)
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Thursday, March 09
I kind of have to agree with Mike. The operation of the radio is very
intuitive and the ability to download the software for a test drive by
feeding it I/Q audio is a big plus to get the feel of the radio.
In addition, there are a lot of posts that have bits of information
about operating mixed
I kind of have to agree with Mike. should have read, I kind of have
to agree with Ken My apologies to both Mike and Ken. I didn't have my
secretary here to proof my prose.
73 de W4TME
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
would be woefully insufficient.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of kburt6
Sent: Saturday, March 11, 2006 8:18 AM
To: FlexRadio@flex-radio.biz
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045 (FAX)
919.215.6375 - cell
PGP public key available at all public KeyServers
Skype: kg4rzy
Hank,
It works fine for me in PSK31 mode. In order to be able to help you
solve you problem, can you provide some details about you setup?
PowerSDR version?
Soundcard type?
VAC version?
VAC Buffers?
Audio Soundcard buffers?
Soundcard buffers? (if applicable)
MixW version?
PC processor type and
Larry,
It looks like the C3 CPU (With SSE support and a larger L2 cache, which
is better suited for the PowerSDR) is x86 instruction set clone, but no
where do I see where on their web site that indicates that they are
Windows 2000/XP supported. They are Win98 and NT supported, but
PowerSDR
I tried it. I got it to decode, and somewhat encode with MixW, but the
levels were very low. Lots of pops and skips in addition to the ladies
voice saying trial every 5 seconds.
I don't see any reason I am going to upgrade to 4.00 since I have had
3.x less than 3 months and there is no discount
Dave,
Due to some ALC and limiter changes in the recent code, different
versions of PowerSDR behave differently related to power output. What
version are you using?
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From
Buffers, buffers, buffers
What is the latency you have set for the Firebox?
What do you have the SDR Audio buffers set for?
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL PROTECTED]
добро пожаловать в клуб
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sergey Abramov
Sent: Friday, March 17, 2006 10:44 AM
To:
What processor are you using? I have a Athlon 2X (dual core) 4400+
(2.2 GHz) on an Asus A8V Deluxe (VIA chipset) and I get the exact same
values you report. If you have a different processor, then there may be
a bug in the program.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical
Look at buffers too. I had to up some buffers to eliminate drop outs,
especially using digital modes.
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
this on the Pro II when doing PSK (digiU) and in LSB mode
Any clues? Non suppressed carrier or something?. I want to figure this
out so I am not QRMing folks that are 3K below me. This has me very
concerned. Any help would be greatly appreciated.
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated
I sure have. I had to increase the VAC and sound card buffers to reduce
the start up latency. I have not tested it on 1.6 since I had to send
my SDR back to the Mother ship for some nurturing and love.
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in
The re-install of Windows will not change the interrupts on the usb,
1394 and sata if all of the controllers are mobo imbedded.
What is your CPU utilization at the time of the drops?
What is the Firebox latency in ms?
What is the soundcard buffer size?
-Tim
---
Tim Ellison ( [EMAIL PROTECTED
If the Firebox sampling rate does not match PowerSDR, you get a
PortAudio Invalid Sample Rate Error and the radio will stay in standby
mode.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED
test it right now, because I am having my QSE replaced :-(
My audio/Delta44/VAC buffer recommendations my be moot now. I sure hope
I can run at 512 without any problems.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message
connectors are not the tightest fitting connector around.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: Paul Shaffer [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 29, 2006 11:19 PM
To: Tim Ellison; FlexRadio@flex
Maybe. But with all the clacking going on you would never be able to
hear your SDR1K :-)
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of W0UN -- John
. The repair time was just one business
day!
Thanks a lot Ed for putting my radio into tip top shape. This was just
another great experience from a great company with phenomenal employees!
The big four should be getting really nervous about now :-O
Kudos to all!
-Tim
---
Tim Ellison mailto:[EMAIL
give us the green light. I'll be the first contributor.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Philip Covington
Sent: Friday, March 31, 2006 5:58
- Director of Marketing: [EMAIL PROTECTED]
(My apologies for those on Yahoo that received this twice. I was
covering all my bases)
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045 (FAX)
919.215.6375
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: Jim Lux [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 05, 2006 11:12 AM
To: Tim Ellison; Flex Radio
Subject: Re: [Flexradio] All Firebox users - Please read
At 06:44 AM 4/5/2006, Tim Ellison wrote
The Firepod is used mostly for professional recording rather than home
studios. Follow the , as they say.
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Not to be a [EMAIL PROTECTED], but how about using a dummy load. It generates a
lot less QRM.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of n5ba
Sent
Ken,
It work on mine like Eric described. Do this. Put the radio in one of
the DIGI modes. Open up setup and check both boxes in the VAC setup.
Click on Apply.
With the Setup screen still open, click on a SSB mode. You should see
the enable check box (the one at the top) go unchecked. Check
I had the same problem until I followed the driver install procedure to
the letter.
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of n5ba
Sent:
Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: Robert McGwier [mailto:[EMAIL PROTECTED]
Sent: Saturday, April 08, 2006 1:31 AM
To: Rick Fletcher, KG6IAL
Cc: Tim Ellison; 'Jim Lux'; 'Flex Radio'
Subject: Re: [Flexradio] All
in focus, that would be
nice.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: Bill Guyger [mailto:[EMAIL PROTECTED]
Sent: Saturday, April 08, 2006 2:51 PM
To: FlexRadio@flex-radio.biz; [EMAIL PROTECTED]; Tim Ellison
Waste $20 seven times and you can get a Delta-44 and all your problems
would be solved :-)
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of KD5NWA
Sent
.
No greater than 10 MeV proton events are expected.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul Shaffer
Sent: Friday, April 14, 2006 5:01 PM
To: FlexRadio@flex
address is on his web site).
Thanks a million, Ray!
Enjoy!
73 de W4TME
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045 (FAX)
919.215.6375 - cell
PGP public key available at all public KeyServers
You are correct.
You can also see how much gain is coming from the different audio
subsystems (EQ, leveler, compression...) to make sure they are not
exceeding 0 dB
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From
Herald,
I am truly sorry that you are having such a difficult time. After reading your
post, I do believe you possibly have several problems that are compounding one
another, which can be difficult to identify and resolve. Rather than
commiserate with you, I'll do my best to try to identify
I played with CuBase using VST plug-ins, but I was not fully satisfied
with the sound quality. I think it was a CuBase thing. BTW, CuBase
crashes PowerSDR on my machine due to ASIO conflicts.
I have put in an enhancement request for PowerSDR to support native VST
plug-ins directly injected into
to the PowerSDR revision releases.
Under Revision, select Head Revision and then click on OK.
Now the source code tree will begin downloading.
Look for the your folder path\trunk\bin\source directory for the
executable
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http
, it definitely is. It is just that I did
and decided to go back to an out-board audio processor. If I didn't
already have the EQplus, I probably would be using the VST plug-ins
since it is a no cost option.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http
Whoops. My mistake. I stand corrected. Thanks Don.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: Don AE5K [mailto:[EMAIL PROTECTED]
Sent: Sunday, April 16, 2006 11:52 AM
To: Tim Ellison
Subject: Re:Re
interface) aspects of the code. They have the
biggest impact and provide the most improvement in the operation of the
radio.
73 and enjoy your Easter (I hope everyone remembered to boil the eggs
first HI HI)
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http
Go for it! Experimentation is what it IS all about, isn't it?
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Naruta
Sent: Sunday, April 16, 2006 4
, splurge for
the Firebox.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Larry Loen
Sent: Sunday, April 16, 2006 3:14 PM
To: [EMAIL PROTECTED]
Cc: FlexRadio
FYI, You can also find it in the files section on the SDR-1000 Yahoo
discussion group.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Christopher T.
Day
Can someone answer Remy's question? Just reply to
[EMAIL PROTECTED] as a CC so it will get back to him. Thank
you.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
I'd like to comment (no flames) on a few of Lee's statements noted
below.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Pedlow, Lee
Sent: Tuesday, April
dipole. Checking with a vertical is an apples to apples
comparison.
Good luck!
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent
without a windows manager so that most of its
processing power is dedicated to crunching numbers. This may be two
different distros; each best matched for the role the box is playing in
your SDR infrastructure.
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http
Your best bet is to call Gerald and ask him. I have not seek any
official notice regarding when the mfg start date was for the stability
mod.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED
There is a detailed description on the Yahoo discussion group in the
files section
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of root [knesbitt]
Sent
VAC 4.x is not supported by PowerSDR yet. Bob says there some bugs that
need to be fixed. Version 3.12 is the one supported by Flex.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto
No offense, but it very would be helpful for you to describe your setup
in some detail in order for anyone to be able to make an assessment of
where to start looking for your problems.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com
Part of the Creative audio driver is still installed.
There may be a special procedure for getting all of the residual
Creative drivers / registry entries from their web site.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original
, but that
sometimes happens to projects that are volunteer oriented. Eric2 and
other can tell you the current state of affairs on it.
73 de W4TME
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED
I don't do any digital that requires VAC for sending output to the SDR
- is that where the problem is?
Yes, Mark. That is where the problem is.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED
). The added benefit of this setup is that I also
use the audio chain with my Icom (backup rig) with just a twist of the
rig selector switch on the EQplus or 8-Band EQ.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From
How about a Scarbrough Reef optimized detector too!
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Duane - N9DG
Sent: Thursday, April 27, 2006 8:01 PM
I was just wondering if Flex had a status on the bug reported with the
first firmware fix or do we need to fire up another letter writing
campaign?
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045
Thanks for the update, Eric.
-Tim
---
Integrated Technical Services
You can't close the door when the walls cave in --Robert Hunter
-Original Message-
From: Eric Wachsmann - FlexRadio [mailto:[EMAIL PROTECTED]
Sent: Friday, April 28, 2006 2:19 PM
To: Tim Ellison; FlexRadio@flex
loops and polarity.
I made changes to how the SDR1K was wired and used isolation
transformers to achieve that goal. There are several great web sites
describing how to do this (NU9N K4QKY just to mention two).
Whatever you choose, you can't go wrong.
73 de W4TME
-Tim
---
Tim Ellison ( [EMAIL
.
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045 (FAX)
919.215.6375 - cell
PGP public key available at all public KeyServers
Skype: kg4rzy
ACK.
-Tim
---
Integrated Technical Services
Oh, Smokestack Lightin', shinin' just like gold.
Why can't you hear me crying.
Oh, stop your train, let a hobo ride.
Why can't you hear me crying.
--Howling Wolf
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Do you have a sound scheme turned on?
Check Control Panel-Sounds and Audio Devices-Sounds.
The Sound Scheme should be set to No Sounds to eliminate the
possibility of Windows oriented QRM.
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com
Eric was able to get free wireless for the TeamSpeak connection. How
resourceful!
-Tim
---
Tim Ellison mailto:[EMAIL PROTECTED]
Integrated Technical Services http://www.itsco.com/
Apex, NC USA
919.674.0044 Ext. 25 / 919.674.0045 (FAX)
919.215.6375 - cell
PGP public key available at all
Yep, That was me who reported it. There is a little too much back
pressure generated between the fan and the vents. You can trace a nice
octagon around the air intake holes by drawing tangents on the existing
holes.
5 minutes with a Dremel tool and a cutting wheel and you are in
business.
101 - 200 of 4185 matches
Mail list logo
