Hi Mark:
The Epson Stylus C20UX is fully supported according to LinuxPrinting.org:
http://www.linuxprinting.org/show_printer.cgi?recnum=Epson-Stylus_C20UX
Use the gimp print drivre they suggest at that URL.
That means that you can use CUPS and Gimp Print in FreeBSD.
1) Install cups and gimp
Hi,
I am trying to get a Creative Sound Blaster MP3+ USB sound card to
work under 5.2.1. I added snd_uaudio_load=YES to /boot/loader.conf,
and dmesg shows the device being found:
uaudio_add_selector: NOT IMPLEMENTED
uaudio0: audio rev 1.00
pcm0: USB Audio on uaudio0
There are /dev/dsp* and
--- Brent Bailey [EMAIL PROTECTED] wrote:
Hello ..ive recently upgraded all our Freebsd
systems to the lastest src
using cvsup and the whole make buildworld
procedure...all is good. Now i
need to update the individual pkgs on the
machine...iv read here and there
about the use of pkg_update
--- Artem Koutchine [EMAIL PROTECTED] wrote:
Hi!
I need sime kind of network file system which has a
FreeBSD server and
Windows clients (particulary Windows XP) and that
FreeBSD file share
must be mounted on Windows XP under a drive letter.
Windows client
is FAR FAR away and is behind
On 2004-07-14 18:41, Gary Kline [EMAIL PROTECTED] wrote:
On Wed, Jul 14, 2004 at 10:39:29PM +0300, Giorgos Keramidas wrote:
You also have to set things up in /etc/mail. Have you changed any
configuration files in that directory? If yes, what were the
changes you made?
Good points.
Fellow BSDers,
I'm looking at 2 quad ethernet cards on eBay: Adaptec ANA-6944TX and Znyx
ZX346.
The Adaptec appears to use a DEC chipset. The Znyx card is supported by
de(4) and also supplies its own FreeBSD drivers up to version 4.4.
Has anyone had good or bad experiences with either of these
Hello everyone,
I am able to ping my loopback as well as my static IP address. but I am
not able to ping any other system on the net, my ISP's DNS server nor the
ISP's Default Gateway. I am able to ping my system by FQDN and just the
host name from the FreeBSD box.
Ping error for the DNS server
On Thursday 15 July 2004 11:26, Pete Collins wrote:
Malcolm,
I noticed your issue on the bsd-questions list without
a response. I struck the same issue with hpux from
10.20 through 11.11. I disabled the X11UseLocalhost
parameter (X11UseLocalhost=no) in the sshd_config to
resolve.
Thanks
On Wed, 14 Jul 2004, Jay Moore wrote:
On Tuesday 13 July 2004 10:30 am, Mipam wrote:
I am using clamav to check on virusses.
This works well. However, when i try to use clamd, it never runs long.
Mostly within a minute or a couple, it exists with signal 6.
I am using this libmap.conf
On Thu, 15 Jul 2004 you wrote:
Fellow BSDers,
I'm looking at 2 quad ethernet cards on eBay: Adaptec ANA-6944TX and Znyx
ZX346.
The Adaptec appears to use a DEC chipset. The Znyx card is supported by
de(4) and also supplies its own FreeBSD drivers up to version 4.4.
Has anyone had
Hello,
I'm getting a total crash every time I try to run vmware. This is my system:
bash-2.05b$ uname -a
FreeBSD potato.hogsedge.net 5.2-CURRENT FreeBSD 5.2-CURRENT #0: Tue Jun 22
07:07:08 BST 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/POTATO
i386
bash-2.05b$ pkg_info | grep vmware
Trying to build the port jdk14, I get the following error message:
/.amd_mnt/mirrorball/export/ports/java/jdk14/work/control/build/bsd-i586/gensrc/java/util/CurrencyData.java:1:
'class' or 'interface' expected
Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location
^
[João Carlos Mendes Luís, 2004-07-12]
Shouldn't the locale select the best charset if it is not defined?
I have problems with this in third party applications. They just set
locale as pt_BR and dont give me a choice of adding a charset extension. What
should I do? Is
Does anyone know anything about the subj? www.freebsd.org info is outdated
(`TBD 2004` is not what I need), www.freebsd.org.ru says the release date is
today
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
Hi FreeBSD folk.
I am reading this install guide. And it doesn't get me past this one.
For one. I downloaded the AMD64 ISO's. And this loader say's freeBSD/i386. Anyway.
I boot to the loader and I can't select anything. Then BTX HALTED. That is all she
wrote. If you all have the answer
On 2004-07-15 13:05, Kyryll Mirnenko [EMAIL PROTECTED] wrote:
Does anyone know anything about the subj? www.freebsd.org info is
outdated (`TBD 2004` is not what I need), www.freebsd.org.ru says the
release date is today
When the release is out it will be announced on the website ;-)
Hi Jerry,
I have an AMD ATHLON XP SYSTEM I am installing this on.
Dunno about the loader part, but you don't want to install the amd64
port on an athlon xp.
Get the i386 port. You'll be fine.
HTH... Nico
___
[EMAIL PROTECTED] mailing list
Hi guys!
I'm a newbie runnin FreeBSD 5.2.1 on Clevo M22ES laptop. Sorry if my
question has been asked before. I have a built-in SmartLink modem (SiS
chipset) and I grabbed myself the official linux driver from their
website. Can I just compile the driver in FreeBSD? I'll be glad if
someone can
All-
Is there a port out there that can be used to compile linux source code on
my freebsd machine?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
you have got a trouble with your sound card
try to put
hw.snd.pcm0.vchans=4
hw.snd.maxautovchans=4
in /etc/sysctl.conf
i hope this message help u
_
MSN Search, le moteur de recherche qui pense comme vous !
Hi JJB,
in the message Running processes fom Sat Feb 14 08:26:45 PST2004
it is writen in the artical that IPFILTER sample rule is available.
I am interested to get a copy. Thank you.
Kind regards,
Uwe
Uwe Klann
Isensteinstr.3
80634 Munich/Germany
Mail: [EMAIL PROTECTED]
I use the Adaptec cards extensively. I have 2 home-made routers with
3 cards in each of them, as well as a firewall with one quad port card
and 2 DLink 530TX cards. I haven't had any problems with them at all.
The much older Cogent cards (before Adaptec bought them) seamed to
always have one
On Thu, 15 Jul 2004, Mipam wrote:
Maybe the program is linked to some libs during compile time, but at
running time is uses other libs? I wonder why i seem to be the only one
who is running into trouble like this. Big difference with OpenBSD is that
FreeBSD 5 does threading and supports SMP, which
Warren Block wrote:
On Thu, 15 Jul 2004, Mipam wrote:
Maybe the program is linked to some libs during compile time, but at
running time is uses other libs? I wonder why i seem to be the only one
who is running into trouble like this. Big difference with OpenBSD is
that
FreeBSD 5 does threading
On Thu, Jul 15, 2004 at 01:05:52PM +0300, Kyryll Mirnenko wrote:
Does anyone know anything about the subj? www.freebsd.org info is outdated
(`TBD 2004` is not what I need), www.freebsd.org.ru says the release date is
today
www.freebsd.org is a more canonical source of information than some
On Thu, Jul 15, 2004 at 07:29:06PM +0800, Ahmad Zulkarnain wrote:
Hi guys!
I'm a newbie runnin FreeBSD 5.2.1 on Clevo M22ES laptop. Sorry if my
question has been asked before. I have a built-in SmartLink modem (SiS
chipset) and I grabbed myself the official linux driver from their
On Wed, Jul 14, 2004 at 11:27:02PM -0700, Henrik W Lund wrote:
I believe RELENG_5_2 has been discontinued, and replaced by RELENG_5_2_1
(if I'm wrong, someone correct me, please). Anyways, try cvsupping using
either one, as at least one of them is bound to work.
That's a bit confused.
Please use a subject line so people don't ignore your message.
Joshua Lewis [EMAIL PROTECTED] wrote:
Hello everyone,
I am able to ping my loopback as well as my static IP address. but I am
not able to ping any other system on the net, my ISP's DNS server nor the
ISP's Default Gateway. I am
[EMAIL PROTECTED] (Uwe Klann) wrote:
Hi JJB,
in the message Running processes fom Sat Feb 14 08:26:45 PST2004
it is writen in the artical that IPFILTER sample rule is available.
I am interested to get a copy. Thank you.
I think you've got the wrong address. This is the FreeBSD questions
On Thu, 15 Jul 2004, Warren Block wrote:
On Thu, 15 Jul 2004, Mipam wrote:
Maybe the program is linked to some libs during compile time, but at
running time is uses other libs? I wonder why i seem to be the only one
who is running into trouble like this. Big difference with OpenBSD is
This is just a final note about this problem. I won't say it is
solved but at least we have a workaround.
This is from 4.10 release, src/dev/fxp/if_fxp.c, lines 509 et ff.
with the 'offending' code ifdef'd out by me:
/*
* Determine whether we must use the 503 serial interface.
I've got 2 relativly recent STABLE machines which were originally but WP
any X functionailty at all. Now I;m starting to use gkrellm to monitor most
of my mahcines with the DISPLAy's all set to a workstation in my office.
I sucesfully compiled gkrellm from the ports on these machines, but I'm
Quoting Ahmad Zulkarnain [EMAIL PROTECTED]:
Hi guys!
I'm a newbie runnin FreeBSD 5.2.1 on Clevo M22ES laptop. Sorry if my
question has been asked before. I have a built-in SmartLink modem (SiS
chipset) and I grabbed myself the official linux driver from their
website. Can I just compile the driver
On Thursday 15 July 2004 15:41, stan wrote:
I've got 2 relativly recent STABLE machines which were originally but WP
any X functionailty at all. Now I;m starting to use gkrellm to monitor most
of my mahcines with the DISPLAy's all set to a workstation in my office.
I sucesfully compiled
Rus Foster wrote:
No. Changing the number of inodes means recreating the filesystem,
and that implies wiping out the contents.
I thought as much. Time to start doing a backup..
Either that or see if there isn't a pile of cruft hidden away in some
directory that you forgot about. Such a thing
Hi,
i have an interesting problem i would like some insight into. i have a
freeBSD server acting as a proxy firewall for an ADSL connection into my
office. PPP is set in ddial mode, but every so often the link goes down and
a simple invocation of the ppp dialer script doesn't seem to help.
Forgot to Cc:
i have an interesting problem i would like some insight into. i have a
freeBSD server acting as a proxy firewall for an ADSL connection into my
office. PPP is set in ddial mode, but every so often the link goes down
and
a simple invocation of the ppp dialer script doesn't seem to
Hi guys!
I'm a newbie runnin FreeBSD 5.2.1 on Clevo M22ES laptop. Sorry if my
question has been asked before. I have a built-in SmartLink modem (SiS
chipset) and I grabbed myself the official linux driver from their
website. Can I just compile the driver in FreeBSD? I'll be glad if
Hi all,
Anyone out there had any luck getting the Linux version of Oracle
8.1.7.4 running on FreeBSD 5.2.1-RELEASE-p9? I have found a few docs on
the 'Net that talk about installing earlier versions, and one originally
in Russian that talks specifically about 8.1.7.4, but the only
translation
I am installing FreeBSD 4.10 from CD. The computer hung up after rebooting
and I am not getting Probe result. Computer and keyboard seems to be hung
up.
I don't see any conflicting devices on my computer.
Can you help me on this?
Thanks.
bawan
I am installing FreeBSD 4.10 from CD. The computer hung up after
rebooting and I am not getting Probe result. Computer and keyboard
seems to be hung up.
Where exactly is it hung? What is the last few lines of output that is
displayed?
Do you have any extra peripherals plugged in (ie. scanner,
Dinesh Nair wrote:
On Thu, 15 Jul 2004, Ahmad Zulkarnain wrote:
I'm a newbie runnin FreeBSD 5.2.1 on Clevo M22ES laptop. Sorry if my
question has been asked before. I have a built-in SmartLink modem (SiS
chipset) and I grabbed myself the official linux driver from their
website. Can I just
THe realtek driver in freebsd is very poor. I have a Dlink DFE 530+ with
a realtek chipset and the machine would actually reboot once a week (small
mail server) and had unusual statements in the log about oversized
frames. I replaced it with a 3com 3c905c and it works great now. (even
Jerry Schromm disturbed my sleep to write:
Hi FreeBSD folk.
I am reading this install guide. And it doesn't get me past this one.
For one. I downloaded the AMD64 ISO's. And this loader say's freeBSD/i386. Anyway.
I boot to the loader and I can't select anything. Then BTX HALTED. That is all
The various 'feels' available with Afterstep don't seem to be
functioning properly, or at least as they did on 4.9 or 4.7. One
problem I'm seeing across all the 'feels' is the inability to click on
the bar across the top to navigate to a program. Anyone else seeing
this problem? Am I
I just started installing it. There is no any extra peripheral connected
to
it. I think I am on first step, I am suppose to get Sysinstall menu after
reboot, but it gets stuck after saying rebooting...
When replying to a post, please ensure you Cc: the list, so that everyone
following the
The various 'feels' available with Afterstep don't
seem to be functioning properly, or at least as they
did on 4.9 or 4.7. One problem I'm seeing across all
the 'feels' is the inability to click on the bar
across the top to navigate to a program. Anyone else
seeing this problem? Am I missing a
Daniel Bye wrote:
Hi all,
Anyone out there had any luck getting the Linux version of Oracle
8.1.7.4 running on FreeBSD 5.2.1-RELEASE-p9? I have found a few docs
on
the 'Net that talk about installing earlier versions, and one
originally
in Russian that talks specifically about 8.1.7.4, but
Matthew Seaman wrote:
On Wed, Jul 14, 2004 at 11:27:02PM -0700, Henrik W Lund wrote:
I believe RELENG_5_2 has been discontinued, and replaced by RELENG_5_2_1
(if I'm wrong, someone correct me, please). Anyways, try cvsupping using
either one, as at least one of them is bound to work.
I tried with options Start kernel configuration and Skip Kernel
Configuration and have same result. Keyboard is not getting off even I do
cold boot, but system start and same thing repeats.
My computer description is:
API Multiprocessor PC
NVDIA RIVA TNT2 Model display card
NIC 3COM (3c905c-TX)
Christian Schüler wrote:
This problem may be related to the problem reported in this
post:
http://lists.freebsd.org/mailman/htdig/freebsd-questions/2004-June/049088.html
When trying to Autogen a new project, the configure script bails with the
message:
...
./ltconfig: Can't open ./ltconfig: No
I tried with options Start kernel configuration and Skip Kernel
Configuration and have same result. Keyboard is not getting off even I
do
cold boot, but system start and same thing repeats.
It sounds like you still have the CD in the drive...Did you follow the
instruction to Remove any
Kenneth Culver wrote:
snip
What you want to do can't be done. The best you can do really is port the
driver. The kernel internals/driver apis are totally different between
linux
and FreeBSD.
Ken
Greetings!
Speaking of driver APIs, do you know of any good resources on that one?
I've tried the
After years of dialup-only service, I have moved to a new location and
gotten broadband access. Only 'one-way' broadband access is available,
through an SB3100 Motorola/General Instrument cable modem that
communicates upstream via dialup, downstream via cable.
I was thinking I ought to set up a
On Thursday 15 July 2004 07:29 am, Kris Kennaway wrote:
On Thu, Jul 15, 2004 at 01:05:52PM +0300, Kyryll Mirnenko wrote:
Does anyone know anything about the subj? www.freebsd.org info is
outdated (`TBD 2004` is not what I need), www.freebsd.org.ru says the
release date is today
Quoting Henrik W Lund [EMAIL PROTECTED]:
Kenneth Culver wrote:
snip
What you want to do can't be done. The best you can do really is port the
driver. The kernel internals/driver apis are totally different between linux
and FreeBSD.
Ken
Greetings!
Speaking of driver APIs, do you know of any good
Hi
Since I am new to freeBSD I may be missing the basics.
Thanks for all the help I am getting here.
I somehow had the linux compatibility issue resolved.
( that was my previous posting), Thanks for the help.
All I did was add the linux_enable=YES in rc.conf
when i checked with kldstat
It's the same problem when I remove CD. Does it make sense: I am installing
on the machine which already have Windows 2003 server, and file system NTFS.
I thought FreeBSD may take care of this file system or it may allow me to do
partition while installing. Thanks.
-Original Message-
hi!
tell me, pls, where can I download php 4.3.3 port for FreeBSD ?
--
Alex
Test from new system, blin
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
On Wed, Jul 14, 2004 at 08:17:29PM -0600, Srot BULL wrote:
from the lime colored jack...? and only using Music Player...I tried
using #cdcontrol -f /dev/acd0 and no sound on either 3 jacks...of
It sounds to me like you don't have the little digital cable
connecting from your CD-ROM to your
Svein Halvor Halvorsen wrote:
Trying to build the port jdk14, I get the following error message:
/.amd_mnt/mirrorball/export/ports/java/jdk14/work/control/build/bsd-i586/gensrc/java/util/CurrencyData.java:1:
'class' or 'interface' expected
Java HotSpot(TM) Client VM warning: Can't detect initial
On Wed, Jul 14, 2004 at 09:21:13PM -0600, epilogue wrote:
On Wed, 14 Jul 2004 23:06:38 -0400
epilogue [EMAIL PROTECTED] wrote:
On Wed, 14 Jul 2004 16:40:10 -0600
Danny MacMillan [EMAIL PROTECTED] wrote:
Is it the subnet mask that lets my computer know that for an IP
address
Captain Anyways wrote:
All-
Is there a port out there that can be used to compile linux source code on
my freebsd machine?
If you've got the sources, you can recompile reasonably portable Linux
programs using the normal system compiler and be fine. Otherwise, look into
the Linux emulator,
i want to go to FreeBSD instead of NetBSD on my i386 machines because of
all new features :( introduced in NetBSD after 1.5 mostly crashing
softdeps, strange memory/unified disk cache management (large writing to
file almost freezes everything) etc. etc.
i installed FreeBSD once to do quick
Wojciech Puchar wrote:
my questions:
Start here :
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
It's the same problem when I remove CD. Does it make sense: I am installing
on the machine which already have Windows 2003 server, and file system NTFS.
I thought FreeBSD may take care of this file system or it may allow me to do
partition while installing. Thanks.
Oh. Did you use
I'm trying to tri-boot windows, gentoo and freebsd 4.10 cause I don't
have an extra HD but had an extra slice to install.
the hd is a maxtor 40gb IDE, model# 4d040h2, labeled on it says: cyl
16383 / head 16 / sectors 63 / LBA 80043264
when I throw the first install cd in it says the drive
Hi,
sorry that the case isn't that easy...
Why don't you build it from ports and save yourself a lot of problems?
(1) because this doesn't build 1.2.2, it starts building 1.0.2 when I type
make install.
(2) pkg_add -r anjuta *does* fetch 1.2.2, and this is what I actually did.
All problems
Danny MacMillan wrote:
[ ... ]
I'm pretty sure I understand subnet masks. The information I
was looking for was how my machine determines which MAC address
to put on the ethernet packet when sending to a machine off
my network.
The packet will contain the MAC address of the router.
Your machine
Christian Schüler wrote:
Why don't you build it from ports and save yourself a lot of problems?
(1) because this doesn't build 1.2.2, it starts building 1.0.2 when I type
make install.
This strongly suggests that your ports tree is out-of-date.
This port's Makefile should start with:
# New ports
Hi all!.
I need help. I have an INTEL i865 motherboard, I have 4.9 installed on
my computer.
There's no sound there, I know how to make it, but it doesn't work.
And I have Lucent/Agere LT WinModem
If anybody see anything else I need to do, tell me please...
So, how can I setup my hardware to work
Wojciech Puchar wrote:
i installed FreeBSD once to do quick performance tests, and at least in
disk I/O and fair scheduling it's MUCH better (tested 4.10 and 5.1).
It's nice to be welcomed by higher performance when you switch OSes. :-)
my questions:
1) what is Buf and Cache in top exactly? why
On Thu, Jul 15, 2004 at 08:30:10PM +0200, Wojciech Puchar wrote:
i want to go to FreeBSD instead of NetBSD on my i386 machines because of
all new features :( introduced in NetBSD after 1.5 mostly crashing
softdeps, strange memory/unified disk cache management (large writing to
file almost
I had to do one more thing:
I needed to bind the IP the box got to the other adapter too. So now the ip
is bound twice, but once with a netmask of 255.255.255.255. It was needed to
let the clients ping the bridge by its external ip.
--
Regards,
Terrence Koeman
MediaMonks B.V.
Hi Everybody ,
I know that , sendmail is pice of FreeBSD but it's using 8.x I want
to use 9.x, question is ;
Does it possbile to disable sendmail8 in conf file and install ports
sendmail 9 ?
Or I have to recompile kernel and disable base system sendmail 8
then install
Hi Everybody ,
I know that , sendmail is pice of FreeBSD but it's using 8.x I want
to use 9.x, question is ;
Does it possbile to disable sendmail8 in conf file and install ports
sendmail 9 ?
Or I have to recompile kernel and disable base system sendmail 8
then install
On 2004-07-15 23:33, Vahric MUHTARYAN [EMAIL PROTECTED] wrote:
I know that , sendmail is pice of FreeBSD but it's using 8.x I want
to use 9.x, question is ;
Does it possbile to disable sendmail8 in conf file and install ports
sendmail 9 ?
Yes. You might have to rebuild everything after
On Thu, Jul 15, 2004 at 08:47:51PM +0200, Christian Sch?ler wrote:
Hi,
sorry that the case isn't that easy...
Why don't you build it from ports and save yourself a lot of problems?
(1) because this doesn't build 1.2.2, it starts building 1.0.2 when I type
make install.
It builds 1.2.2
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Wojciech Puchar
Sent: Thursday, July 15, 2004 1:30 PM
To: [EMAIL PROTECTED]
Subject: FreeBSD beginner (NetBSD advanced)
[snip]
my questions:
1) what is Buf and Cache in top exactly? why buf on 96MB
On Thu, 15 Jul 2004 20:30:10 +0200 (CEST)
Wojciech Puchar [EMAIL PROTECTED] wrote:
i want to go to FreeBSD instead of NetBSD on my i386 machines because of
all new features :( introduced in NetBSD after 1.5 mostly crashing
softdeps, strange memory/unified disk cache management (large writing
/usr/ports/www/mod_php4
/usr/ports/lang/php4
If your ports tree is up to date, you will get php 4.3.7
On Thu, 15 Jul 2004 20:41:46 +0300, Alex [EMAIL PROTECTED] wrote:
hi!
tell me, pls, where can I download php 4.3.3 port for FreeBSD ?
--
Alex
Test from new system, blin
If you look at
http://www.freebsd.org/releases/5.3R/todo.html
you will see what's left to do
On Thu, 15 Jul 2004 11:50:12 -0500, Chris [EMAIL PROTECTED] wrote:
On Thursday 15 July 2004 07:29 am, Kris Kennaway wrote:
On Thu, Jul 15, 2004 at 01:05:52PM +0300, Kyryll Mirnenko wrote:
Does
2) can i compile kernel with -march=pentium,pentium[234] -O2
optimization? in NetBSD 2.0 doing -march=pentium produces
kernel that doesn't boot at all, just resets.
2.0 is always under develpoment and not yet released. I don't see the
problem with 1.6.2.
4) is IPv6 working well? (i mean no
On Thu, Jul 15, 2004 at 02:29:39PM -0400, Chuck Swiger wrote:
Captain Anyways wrote:
All-
Is there a port out there that can be used to compile linux source code on
my freebsd machine?
Install the relevant linux_devtools port, which includes a linux
version of the gcc toolchain. You can
On Thu, 15 Jul 2004 15:40:21 -0300
Geoffrey Lane [EMAIL PROTECTED] wrote:
I'm trying to tri-boot windows, gentoo and freebsd 4.10 cause I don't
have an extra HD but had an extra slice to install.
the hd is a maxtor 40gb IDE, model# 4d040h2, labeled on it says: cyl
16383 / head 16 / sectors
On Thu, 15 Jul 2004 20:04:00 +0200
Gustaaf Wijnands [EMAIL PROTECTED] wrote:
Svein Halvor Halvorsen wrote:
Trying to build the port jdk14, I get the following error message:
/.amd_mnt/mirrorball/export/ports/java/jdk14/work/control/build/bsd-i5
86/gensrc/java/util/CurrencyData.java:1:
Wojciech Puchar wrote:
i installed FreeBSD once to do quick performance tests, and at least in
disk I/O and fair scheduling it's MUCH better (tested 4.10 and 5.1).
It's nice to be welcomed by higher performance when you switch OSes. :-)
while high performance is always cool, stable performance
for excellent user support. now i have enough answers and can start
working tomorrow :)
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Thu, Jul 15, 2004 at 12:55:19PM -0600, Chuck Swiger wrote:
The packet will contain the MAC address of the router.
Your machine will lookup the MAC address by doing an ARPOP_REQUEST for the
IP address mentioned in the routing table which matches the destination IP
address of the packet
Hi guys I gwould like to configure netatalkd to
downcase all the name files whe they are created. Is
it passible?. I am running freebsd 5.1.
Greetings and thanks in advance
__
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free
Hello everyone,
I am able to ping my loopback as well as my static IP address. but I am
not able to ping any other system on the net, my ISP's DNS server nor the
ISP's Default Gateway. I am able to ping my system by FQDN and just the
host name from the FreeBSD box.
Ping error for the DNS server
I called my ISP and they said I am set up fine. You are probably correct
about just making hard for people to help. So here is what you asked.
Sounds like you're routing isn't right. What does 'netstat -rn' show you?
Is that information correct? Do you have a 'defaultrouter=??' line in
Joshua Lewis disturbed my sleep to write:
I am able to ping my loopback as well as my static IP address. but I am
not able to ping any other system on the net, my ISP's DNS server nor the
ISP's Default Gateway. I am able to ping my system by FQDN and just the
host name from the FreeBSD box.
Do you hear people say they feel completly stupid becuase of what the
problem was often?
Well if you don't you do now.
After paying better attention to my startup log a little prase saying no
carrier stuck out this time. I checked my new switch that I bought for my
new setup and it looked fine.
On Thu, 15 Jul 2004 19:18:35 -0700, Joshua Lewis [EMAIL PROTECTED] wrote:
I have listed in my rc.conf my ISP's Default Gateway, my IP, my subnet.
Try setting the default gateway to the internal ip address of your router.
___
[EMAIL PROTECTED] mailing
hi,
i have a 4.10 box, today i try to install mkisofs, i cvsup first, then got a problem i
have never seen before.. with following..
# uname -r
4.10-STABLE
# make search name='mkisofs' | grep Path
Path: /usr/ports/chinese/mkisofs
Path: /usr/ports/korean/mkisofs
Path:
On Fri, Jul 16, 2004 at 11:24:25AM +0800, kinux wrote:
hi,
i have a 4.10 box, today i try to install mkisofs, i cvsup first, then got a problem
i have never seen before.. with following..
[...]
# cvsup -g -L 2 /usr/local/etc/cvsup/sup/ports-supfile
# cd /usr/ports
# make search
Kevin,
If you get an answer to your question, or your problem with your USB
sound card sorted out, if you could email me I'd appreciate it.. I'd
like to know what you did..
I have an Onkyo USB audio interface that absolutely sings on my other
computers and I'd love to get it working on my 5.2.1
to avoid leakage of sensitive information: any advice?
X-Habeas-SWE-1: winter into spring
X-Habeas-SWE-2: brightly anticipated
X-Habeas-SWE-3: like Habeas SWE (tm)
X-Habeas-SWE-4: Copyright 2002 Habeas (tm)
X-Habeas-SWE-5: Sender Warranted Email (SWE) (tm). The sender of this
X-Habeas-SWE-6: email
Thanks for the response...
Danny MacMillan wrote:
It sounds to me like you don't have the little digital cable
connecting from your CD-ROM to your sound card. The equivalent
task may work in Windows if they read the music through the
IDE interface and pipe it through the sound card instead of
1 - 100 of 104 matches
Mail list logo
