on
more SMPPTS intensive functions like RECEIVE, that sounds like a pretty good
idea.
Even though a PDSE can be bigger than 64K tracks, it still is limited to a
single volume
and zFS (or HFS) file systems aren't.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
and /var now (1.13)
supposed to be directories in / rather than symlinks to the /SYSTEM
subdirectories?
They are still symlinks for z/OS 1.13. What do the directories look like on
your
service mount point? Or does you install into the live root in your
installation/sandbox
LPAR (eek!).
--
Mark
didn't think IBM ever serviced /etc or /var via maintenance.
John Eells or Marna Walle (if you are lurking), can you comment on #2?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS
On Mon, 18 Jun 2012 13:13:10 -0500, Mark Zelden m...@mzelden.com wrote:
On Mon, 18 Jun 2012 10:49:04 -0600, Jerry Whitteridge
jerry.whitteri...@safeway.com wrote:
In service mode the /etc and /var directories are supposed to be true
directories so maintenance can be applied. When you clone
On Wed, 20 Jun 2012 09:47:06 -0400, Richards, Robert B.
robert.richa...@opm.gov wrote:
John,
Ignore my reply. Kees' suggestion is much better! :-)
Bob
Yeah, RTFM is a good place to start.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
, I commented out
that code 15 years ago. I have no clue what purpose it serves to
reserve the entire volume when writing an output data set to disk.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
than 255 daily
GDGs created from offloads and we had to manually code the
volsers in MXG JCL.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
On Thu, 21 Jun 2012 04:25:48 -0500, Elardus Engelbrecht
elardus.engelbre...@sita.co.za wrote:
Mark Zelden wrote:
I'm not sure exactly. Maybe to keep 2 of them start are started at the same
time from causing a problem since nothing else uses that qname/rname.
This is what I also guessed
of shops still use as part of their daily
SMF roll up process as it issues an I SMF internally to get
the current data plus dumps any / all MANx data sets that
need to be dumped (in case any were missed or there is
no other process in place to dump them when they fill up).
Regards,
Mark
--
Mark Zelden
On Thu, 21 Jun 2012 09:59:13 -0500, Elardus Engelbrecht
elardus.engelbre...@sita.co.za wrote:
Mark Zelden wrote:
What do you mean you don't use reserves? You have commented them out in the
code, or your IODF/HCD isn't coded for shared DASD thus not issuing the
reserves?
Hmmm, interesting. I
On Thu, 21 Jun 2012 10:20:56 -0500, Elardus Engelbrecht
elardus.engelbre...@sita.co.za wrote:
Mark Zelden wrote:
As far as I can tell from one of your posts, I am using the same code you
do. I do asm/lnk with other usermods / exits for each OS upgrade.
These are the only changes I have
* is imp=1. :-( (I know that my frustration is showing...)
Reminds me of a joke in the recording studio when doing a mix and
to make everything louder than everything else. :-)
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
with the largest 2 DB2
subsystems have regions on each LPAR. There are some other
DB2 subsystems that are production (I think) not shared across
all LPARs and some QA/DEVL regions either on a single LPAR
only or a subset of the sysplex.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390
don't have zHPF and/or HIPERPAV active is they are
not free HW features. I don't know if the vendors charge for MIDAW or
not, or if it just takes the proper HW / code levels to support it.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
from the CDS one after you come up on the new name.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
of the component and
the error when trying to delete it.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
following
it closely, but based on the CA-7 PTFs I saw released right afterwards
I would say the problem was related to the attempted upgrade (highly
doubtful that it was operators that attempted it) and backout coupled
with a CA-7 software issue that RBS couldn't have foreseen.
Mark
--
Mark Zelden
with that statement)
But you can keep dreaming.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
is irrelevant.
Or am I being na�ve?
.
The sysplex is either parallel or not. And all the members are part of that.
However, sysplex sharing of z/OS Unix file systems can be a subset of
the sysplex just like JES2, SMS, etc.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS
it on
for any systems I managed in 25 years. I never realized the SR panel in SDSF
showed
anything but outstanding WTORs. Another reason to keep AMRF inactive. :-)
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
On Wed, 18 Jul 2012 11:58:48 -0500, Mark Zelden m...@mzelden.com wrote:
Add FIRST to the end of the find or a TOP command in-between the find.
Never mind... I didn't see the ALL in the find command. I usually put that
at the end and missed it.
--
Mark Zelden - Zelden Consulting Services
On Fri, 20 Jul 2012 14:45:40 -0500, Mark Zelden m...@mzelden.com wrote:
On Fri, 20 Jul 2012 13:33:07 -0400, Bonno, Tuco t...@cio.sc.gov wrote:
is there an UNEQUIVOCAL method for finding out which ptf introduced which
HealthCheck??
Yes, consult the encyclopedia - AKA Marna Walle
On Fri, 20 Jul 2012 15:31:07 -0500, Mark Zelden m...@mzelden.com wrote:
On Fri, 20 Jul 2012 14:45:40 -0500, Mark Zelden m...@mzelden.com wrote:
On Fri, 20 Jul 2012 13:33:07 -0400, Bonno, Tuco t...@cio.sc.gov wrote:
is there an UNEQUIVOCAL method for finding out which ptf introduced which
maintenance, but
against
the zones / release I'm upgrading to:
IBM.ProductInstall-RequiredService
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
in 2010 and I updated my z/OS 1.11 exit then. I start with the sample
and then integrate my flower box EXCP by DDNAME code.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http
research yesterday
and didn't find anything. Since the listserv was functioning fine, it would
have been nice if someone had posted something about the problem to the
list.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
and tells
you how much time you have before an IPL will be required based
on the depletion rate.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
On Fri, 17 Aug 2012 09:44:20 -0500, Mark Zelden m...@mzelden.com wrote:
On Fri, 17 Aug 2012 13:35:09 +0200, Vernooij, CP - SPLXM
kees.verno...@klm.com wrote:
Hello,
We have defined IEFUSI as dynamic exit and ADDed it in PROGxx.
Now I have modified the module, UPDATEd LLA and want
and CICS they don't tend to run (as far) behind.
My experience at several shops has been #2. Not much production IMS,
not much expertise left or people who care to get it upgraded, so it
is an after thought.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
', but can still
consume service.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
ASID list programs from my web site. :-)
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
. Jaffe. :-)I had problems viewing it
on Firefox 15.0 for some reason, but looked fine on IE.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
. :-)
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
the additional exception of languages like COBOL and PL1
that also weren't ordered with a OS/390 or z/OS Serverpac either
since they were maintained / upgraded separately.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
. Or is there
another link from that page I am missing. My normal IBMLINK
URL is https://www.ibm.com/ibmlink. Just tried at 11:23 ct and it
is still not working.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
On Mon, 20 Aug 2012 11:01:01 -0500, Mark Zelden m...@mzelden.com wrote:
On Mon, 20 Aug 2012 10:10:10 -0500, Vince Getgood getgo...@hotmail.com wrote:
Hi all,
Is anyone out there running IMS V9 on z/OS 1.13?
I know IMS v9 has been out of support since 2010, but that's where we are. I
can see
On Tue, 11 Sep 2012 10:19:59 -0500, Boris Lenz boris.l...@ims.sells.ch wrote:
There are 6785 subscribers on IBM-MAIN and 1723 on CICS-L. You can find these
numbers on the listserv website.
No dedupe and tell us. :-)
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
Other than the requirement for AIM level 3 to use BPX.UNIQUE.USER, and
BPX.DEFAULT.USER going away after z/OS 1.13, has there been any
other SOD related to not running AIM level 3?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m
profiles like
BPX.SUPERUSER and/or UNIXPRIV.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
PTFS USERMODS FORFMID(XXX).
Note that those sysmods could still be stuck there even if you've
applied and accepted a dummy function that deletes the function
sysmod(s) unless you execute REJECT.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m
/* initialise count */
I still use MCNVTCAT when I need it (which has been a long time).
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS
Not my code, and I'm not going to spend a lot of time looking, but if
you are doing a catalog compare and cat.old cat.new both are
set to the same value, it seems to me that might be a problem.
Maybe Alastair will get wind of this thread and clear everything up.
Mark
--
Mark Zelden - Zelden
are characterized first, then CPs, followed by IFLs, ICFs,
zAAPs, and zIIPs.
For performance reasons, CPs for a logical partition are grouped together as
much as
possible. Having all CPs grouped in as few books as possible limits memory and
cache
interference to a minimum.
Regards,
Mark
--
Mark
On Wed, 19 Sep 2012 18:09:43 +0200, R.S. r.skoru...@bremultibank.com.pl wrote:
W dniu 2012-09-19 17:19, Mark Zelden pisze:
I'm sure this is a feature, not a bug - and you can't change it. (Maybe
setting
HIPERDISPATCH off in IEAOPTxx prior to IPL would
On Thu, 20 Sep 2012 16:25:17 +, Ward, Mike S mw...@ssfcu.org wrote:
How can you give each LPAR more CP's than you physically have?
You can reserve more than you have. This was the only way to get one
added without an IPL prior to z10 (and above) and z/OS 1.10 (and above).
--
Mark
On Thu, 20 Sep 2012 13:36:15 -0500, Mark Zelden m...@mzelden.com wrote:
On Thu, 20 Sep 2012 13:24:16 -0500, Dana Mitchell mitchd...@gmail.com wrote:
I'm working on installing HTTP server IMWEBSRV on a system with a read only
root zfs. The setup.sh wants to create directories under
/usr/lpp
an optional panel to help you execute the exec.
BTW, did you try searching the archives or Google before this post?
There was just a similar thread within the last couple of weeks.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
. As long as the extents remain the same as you indicated.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
.The
directory will be read again when refreshed, so the new
blocks added will be picked up.
And I've done this before, but you can run a simple test if you
want to verify for yourself.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
a whole lot about PDS extents. Only LLA cares about
directory details.
Agreed.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming
job with no problems.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
On Thu, 27 Sep 2012 07:34:31 -0500, Tom Marchant m42tom-ibmm...@yahoo.com
wrote:
On Wed, 26 Sep 2012 15:14:46 -0500, Mark Zelden wrote:
On Wed, 26 Sep 2012 16:04:06 -0400, Ken Porowski wrote:
I was a little worried after the first 3 responses of Yes, No, and
Maybe.
If you have a sandbox LPAR
the above requirements, then the only way is to
have extra LPs reserved in the image profile prior to activation.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http
logging functions for programs
_BPX_JOBNAME='SYSLOGD' /usr/sbin/syslogd -f /etc/syslog.conf
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com
own question.If you are starting
it via /etc/rc, then when you try to start it from a
console START command or AUTOLOG it will have already
been active and you will see the message you are seeing.
Choose only one method to start it (I prefer /etc/rc).
Regards,
Mark
--
Mark Zelden - Zelden
On Wed, 10 Oct 2012 04:31:27 -0500, Elardus Engelbrecht
elardus.engelbre...@sita.co.za wrote:
Can't help you with the answer, but I wonder WHY, o, WHY is there this IPL
requirement when changing CI?
One word answer: History.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390
MEMBER x has PACK y and SCLM z
and so forth.
You could just use EDMACALL from my web site / CBT file 434 and just have the
macro issue PACK OFF;SAVE for each member. That's if you
didn't care about updating ISPF stats for all the members.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS
request is coded. If the page frame size is coded as 1MEG, the request
will fail (but maybe DB2 retries with MAX or 4K?). If coded as MAX,
it will end up being backed by 4K frames.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
would
provide
a clue as to whether this is an actual problem or a configuration / user error.
At worst case IBM should provide instructions on the data to collect / transmit
if the problem happened again.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m
) to your existing OMVS SMFPRMxx parameters. If you don't already
have anything coded for OMVS, do this.
SUBSYS(OMVS,(NOTYPE(30))
Another example:
SUBSYS(OMVS,EXITS(IEFU83,IEFU84,IEFUTL),INTERVAL(003000),NOTYPE(30))
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
and it is not documented. There are no CF structures involved,
only XCF communications which only require a basic sysplex.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
and
above, without worrying about some ginormous definition making someone who's
short on below-the-bar memory think they have a bunch left.
You can have a look at REXXSTOR on my web site as an example of
displaying LDA control block values.
Regards,
Mark
--
Mark Zelden - Zelden Consulting
On Thu, 8 Nov 2012 05:28:45 -0800, Phil Smith p...@voltage.com wrote:
Mark Zelden wrote, in part:
Yes, see RSM Address Space Block Extension (RAX) SYS1.MODGEN(IARRAX)
See my REXX sample - RXSTOR64 on my web site.
You can have a look at REXXSTOR on my web site as an example
area intermixed with LSQA
and subpools 229, 230, and 249.
/quote
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
storage address available.
John Gilmore, Ashland, MA 01721 - USA
Maybe I missed something...
Didn't you just change MVS/XA architecture?2^31 - 1 or x'7FFF'.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
On Thu, 8 Nov 2012 13:04:52 -0600, Mark Zelden m...@mzelden.com wrote:
On Thu, 8 Nov 2012 16:46:13 -0200, Carlos Bodra cbo...@terra.com.br wrote:
I known that z/OS.e is an special offer from IBM for new workloads and
bla bla bla... but my question is about possibility to run COBOL
programs under
and restrictions etc. You used to be able
to find it on the software pricing web set, which is currently
http://www-03.ibm.com/systems/z/resources/swprice/mlc/znalc.html
z/OS.e was replaced by zNALC.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
, it doesn't count against the SLA unless something happens
and the change implementation goes beyond the approved time period.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS
of how old these systems are at this
point. Is it only having on CP defined? Also, this WAS under VM, correct?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's
an hour? Who
determines
how to quantify that and what the penalties are if any?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http
)
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming
)
On Tue, 1 Oct 2013 12:23:07 -0500, Mark Zelden m...@mzelden.com wrote:
On Tue, 1 Oct 2013 16:29:15 +, Rouse, Willie wro...@co.pg.md.us wrote:
Hello All,
Is there a simple way to run ISPF DSLIST as a batch TSO job?
You can use this JCL as a template:
(from http://www-01
//DD1 DD DSN=MZELDEN.PDS,DISP=SHR
//SYSPRINT DD SYSOUT=*
//SYSUDUMP DD SYSOUT=*
//SYSINDD *
DELETE MZELDEN.PDS(MEMBER) FILE(DD1)
/*
Regards,
Mark
--
Mark Zelden
On Wed, 2 Oct 2013 10:48:49 -0500, Mark Zelden m...@mzelden.com wrote:
On Wed, 2 Oct 2013 18:14:15 +0300, Binyamin Dissen
bdis...@dissensoftware.com wrote:
I am aware of the ISPF LM functions.
I wonder if there is a native MVS or TSO command to easily do this.
There is delete pds(member
it for. For example, setting up a batch installation,
maintenance or production job stream. If it is something you need to
repeat on a regular basis, there is probably not a human involved
editing the PDS member when you desire to do the delete.
Regards,
Mark
--
Mark Zelden - Zelden Consulting
UNSOLDISP(NO) SOLDISP(NO)
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://search390
(main code)
CONSPROF UNSOLDISP(UNSDISP) SOLDISP(SOLDISP)
CONSOLE DEACTIVATE
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's
My first thought was that it could be related to CSORT, but I wouldn't expect
this
bug (nor any CSORT action) to update the saved variables for recalling commands.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
is a post of mine from January 2012 that explained why the extra
storage was needed.
https://listserv.ua.edu/cgi-bin/wa?A2=ind1201L=ibm-mainD=1T=0O=DF=S=X=086E2A74E9A368C125Y=mark%40mzelden.comP=246772
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
catalog data sets just because.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
On Tue, 8 Oct 2013 10:35:26 -0500, Mark Zelden m...@mzelden.com wrote:
On Tue, 8 Oct 2013 08:14:44 -0700, Skip Robinson jo.skip.robin...@sce.com
wrote:
The last couple of posts in this thread have overlooked Andy Higgins's
observation that SYSR1--or any symbolic for that matter--cannot be used
collecting data for a
particular record or subtype to avoid the overhead of data collection
if it is not written.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
to install / use alternatives. Fortunately, I do have a choice.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems
Scott,
Your response isn't clear to me. Are you saying what Charles wrote is
accurate (SMFPRMxx setting doesn't really matter) or that SMFPRMxx
always has the final say (as I always thought it did up until Charles posted).
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390
(of all places). But I guess since System REXX is covered in the
Authorized
Assembler Services Guide, this isn't a shock. :-)
http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iea2g1c2/1.10?SHELF=all13be9DT=20120815003139
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS
some members of this list could attest to, it has not been the most
reliable tool over the years and is not an officially supported either.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Is the system or sysplex defined to the configuration?
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems
So is the system name defined to the configuration?
BTW, a monoplex still has a sysplex name unless it is running sysplex(local).
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
So the system does not come up far enough without SMS for you to
logon to TSO/ISPF and get into ISMF?
If you are doing this from a driving system, the way that sort of issue
is dealt with is via SSA. For VSAM, you do that via define path.
Mark
--
Mark Zelden - Zelden Consulting Services - z
should be
given the user's input.
I think more the latter, but perhaps some of both. I personally didn't have
the problems
so without searching the archives I can't tell you for sure. I do recall some
posts
in particular from Barbara Nitz within the last couple of years.
Mark
--
Mark Zelden
(tiny)
http://tinyurl.com/ktjw794
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
=20120814144655
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://search390.techtarget.com
swag is the same.
While the structure is duplexed, operations to the structure are maintained
in a synchronized manner
And I did refer to CF CPU time in my other post and understood that was what
you were referring to as well. That part of your question was clear.
Regards,
Mark
--
Mark
need to delete the object but only one of them needs to do the work to
send back the data.
But is that behavior different for system managed duplexing vs. user
managed duplexing?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3
, but there is a man page on it these days also.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming
.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://search390.techtarget.com
-purge msgclass.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
ITIL v3 Foundation Certified
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://search390
1 - 100 of 604 matches
Mail list logo
