Re: [Repeater-Builder] HYT Repeater vs. Trbo Repeater

The HYT repeater is actually a Proper repeater and has been designed around the Spectra Engineering MX800 http://www.spectraeng.com.au/So if you are looking at implementing a DMR repeater into a RF dense site, I'd definitely know which way I'd go. No questions Gareth Bennett RadioSystems

Re: [Repeater-Builder] Re: Tait T296

Hi Mike, Depends on what you want to know I suppose? Gareth Bennett RadioSystems Limited P.O. Box 5202 Dunedin 9024 New Zealand DDI: (03) 489 1101 FAX: (03) 489 1151 MOB: (0224) 588 377 gare...@radsys.co.nz - Original Message - From: Mike Morris To: Repeater-Builder

Re: [Repeater-Builder] Antenna Advise

What about the receive side of the equation? ...After all the mobile still needs to access the repeater in the first place. Cheers Gareth Bennett RadioSystems Limited P.O. Box 5202 Dunedin 9024 New Zealand gare...@radsys.co.nz - Original Message - From: w6ghz To: Repeater

[Repeater-Builder] Ruggedised panel antennas

Hi Group, I'm just wondering if anybody has an alternative to Katherin-Scala for heavy duty radomed panel antennas in the 450-500 MHz band at around 10dBi gain that will stand up to the abuse of an alpine site (2Km ASL) Just after feedback and opinions Cheers Gareth Bennett RadioSystems

Re: [Repeater-Builder] Tait T800 Series II

Are you looking for 12.5 KHz repeaters? Cheers Gareth Bennett RadioSystems P.O. Box 5202 Dunedin 9024 New Zealand - Original Message - From: x.tait.tech To: Repeater-Builder@yahoogroups.com Sent: Tuesday, June 15, 2010 9:24 PM Subject: Re: [Repeater-Builder] Tait T800

Re: [Repeater-Builder] kyodo kg108 uhf

Check to see if the com port in the software matches your laptops com port (Usually COM1) Cheers Gareth Bennett RadioSystems P.O. Box 5202 Dunedin 9024 New Zealand gare...@radsys.co.nz - Original Message - From: kerincom To: mail=repeater-buil...@yahoogroups.com Sent

Re: [Repeater-Builder] DMR Repeaters

is well respected in the professional industry. See: http://www.spectraeng.com.au/mx800.shtml Mike, did you get my private message earlier? Cheers Gareth Bennett RadioSystems P.O. Box 5202 Dunedin 9024 New Zealand gare...@radsys.co.nz - Original Message - From: k7...@skybeam.com

[Repeater-Builder] DMR Repeaters

. Cheers Gareth Bennett RadioSystems P.O. Box 5202 Dunedin 9024 New Zealand gare...@radsys.co.nz

Re: [Repeater-Builder] Using IC-F1010 x 2 as repeaters???

. Cheers Gareth Bennett RadioSystems P.O. Box 5202 Dunedin 9024 New Zealand gare...@radsys.co.nz - Original Message - From: Harald A.Eriksen To: Repeater-Builder@yahoogroups.com Sent: Saturday, June 05, 2010 8:17 AM Subject: [Repeater-Builder] Using IC-F1010 x 2 as repeaters

Re: [Repeater-Builder] Tait T800 Series II

What frequency and channel spacing do you require ? Gareth Bennett RadioSystems P.O. Box 5202 Dunedin 9024 New Zealand gare...@radsys.co.nz - Original Message - From: Marcus To: Repeater-Builder@yahoogroups.com Sent: Saturday, June 05, 2010 1:50 PM Subject: [Repeater

Re: [Repeater-Builder] Need source for UHF power module

than actually replacing the Hybrid PA module. Hope this helps? Gareth Bennett RadioSystems P.O. Box 5202 Dunedin 9024 New Zealand - Original Message - From: x.tait.tech get real To: Repeater-Builder@yahoogroups.com Sent: Sunday, May 23, 2010 9:34 AM Subject: Re: [Repeater

Re: [Repeater-Builder] Re: Voted receive

it by a different name like RSSI Scan or RSSI Voting etc. Gareth Bennett RadioSystems P.O. Box 5202 Dunedin 9024 New Zealand DDI: (03) 489 1101 FAX: (03) 489 1151 MOB: (0224) 588 377 gare...@radsys.co.nz - Original Message - From: Chuck Kelsey To: Repeater-Builder

Re: [Repeater-Builder] UHF System Budget Example

Just as a suggestion, You may wish to purchase Voting portables, then you can programme 2 channel voting group, channel #1 being the repeater and channel #2 being simplex on repeater input frequency if regs allow. It's surprising how well this works Gareth Bennett - Original Message

Re: [Repeater-Builder] UHF System Budget Example

(Or noise). Done right, Voting is seamless and invisible to the user. Gareth Bennett RadioSystems P.O. Box 5202 Dunedin 9024 New Zealand DDI: (03) 489 1101 FAX: (03) 489 1151 MOB: (0224) 588 377 gare...@radsys.co.nz - Original Message - From: Chuck Kelsey To: Repeater-Builder

Re: [Repeater-Builder] UHF System Budget Example

Yep, most manufactures market a voting portable in one shape or another. Motorola Waris series, Some Icom, HYT, Tait and Vertex Standard (I developed the Voting software for the VX-820 series). Hope this helps Gareth Bennett RadioSystems P.O. Box 5202 Dunedin 9024 New Zealand DDI: (03) 489

Re: [Repeater-Builder] Re: Another neat kit for repeaters

operate as business units and charge out their services to produce IED's. Gareth Bennett - Original Message - From: Mike Besemer (WM4B) To: Repeater-Builder@yahoogroups.com Sent: Monday, May 03, 2010 7:52 AM Subject: RE: [Repeater-Builder] Re: Another neat kit for repeaters

Re: [Repeater-Builder] spare parts for TAIT repeater

the windings. Cheers Gareth Bennett

Re: [Repeater-Builder] Re: Motorola Power Supply Questiona

:-) Thanks again. Graham. --- In Repeater-Builder@yahoogroups.com, Gareth Bennett gare...@... wrote: Hi Graham, We recently threw out dozens of similar items from Transpower sites that were in service as constant voltage float chargers in substations. What you may have

Re: [Repeater-Builder] Motorola Power Supply Questiona

Hi Graham, We recently threw out dozens of similar items from Transpower sites that were in service as constant voltage float chargers in substations. What you may have is a constant voltage charger with supervision circuitry by the looks of it, and a way to set voltage and overcurrent

Re: [Repeater-Builder] Radio Parts available in NZ

How many Tait T800 bins do you have? Are these Maritime NZ 25 KHz VHF with UHF I Band T855/856 links? Series 1 or Series 2 Cheers, Gareth - Original Message - From: DeanP To: Repeater-Builder@yahoogroups.com Sent: Friday, February 19, 2010 3:53 PM Subject:

Re: [Repeater-Builder] HAM Mototrbo Systems

is Trbo backwards compatible. Cheers Gareth Bennett - Original Message - From: Mark To: Repeater-Builder@yahoogroups.com Sent: Monday, February 15, 2010 7:26 AM Subject: RE: [Repeater-Builder] HAM Mototrbo Systems I think it will be interesting to see whether Motorola

Re: [Repeater-Builder] Tait UHF Standby Repeater D-Band

the proper manuals and test gear. Cheers Gareth Bennett - Original Message - From: Marcus To: Repeater-Builder@yahoogroups.com Sent: Wednesday, October 28, 2009 8:04 PM Subject: Re: [Repeater-Builder] Tait UHF Standby Repeater D-Band Also i am running the system up

Re: [Repeater-Builder] Tait UHF Standby Repeater D-Band

filter system, generally as the Tait duplexers are notch devices only. Cheers Gareth Bennett (- Original Message - From: Marcus To: Repeater-Builder@yahoogroups.com Sent: Monday, October 26, 2009 11:26 PM Subject: Re: [Repeater-Builder] Tait UHF Standby Repeater D-Band i have

Re: [Repeater-Builder] Tait UHF Standby Repeater D-Band

Hi Marcus, How many do you require, and what model Tait? I have either T300 or T800 Series rackmount duplexers available Cheers Gareth Bennett (- Original Message - From: Marcus To: Repeater-Builder@yahoogroups.com Sent: Monday, October 26, 2009 1:30 PM Subject: [Repeater

Re: [Repeater-Builder] Vertex service manuals

Hi Ian, Contact me off list...This is a very common and easy mod gare...@es.co.nz Cheers Gareth Bennett (Technical Services) Signals NZ Ltd 8 Manor Place P.O. Box 1439 Dunedin 9015 New Zealand Phone : 03 477-4342(64 3 477-4342) Fax : 03 474-5251(64 3 474-5251) Mobile : 027 458-8377

Re: [Repeater-Builder] Re: tait repeaters

Lots of cheap Tait Repeaters to be had here in New Zealand :-) Regards Gareth Bennett From: tracomm To: Repeater-Builder@yahoogroups.com Sent: Monday, September 07, 2009 1:59 AM Subject: [Repeater-Builder] Re: tait repeaters Acquisition cost for Tait units was high, however

Re: [Repeater-Builder] tait repeaters

Since when did the NZ Governmnet take over Tait? Thats news to me and the rest of New Zealand Gareth Bennett - Original Message - From: Andrew Seybold To: Repeater-Builder@yahoogroups.com Sent: Saturday, September 05, 2009 1:20 PM Subject: RE: [Repeater-Builder] tait

Re: [Repeater-Builder] Re: tait repeaters

Thats exactly what I thought too Chris :-) I was beginning to worry that I was out of touch within the NZ fraternity of commercial LMR Gareth Bennett To: Repeater-Builder@yahoogroups.com Sent: Saturday, September 05, 2009 10:15 PM Subject: [Repeater-Builder] Re: tait repeaters

[Repeater-Builder] OT: reccomendations for 2400/4800 bps modems

any preferences or recommendations? Price will be an issue as this is work that I am undertaking on behalf of a non-profit entity. Thanks in advance Gareth Bennett

Re: [Repeater-Builder] Re: Portable repeater and RSSI issues

that could be mucked up in the heat of the moment. We use the VX-820 commercial range of radios with special firmware. Regards Gareth Bennett At 8/5/2009 15:40, you wrote: Gareth, I like your portable repeater! Is it Yeasu/Vertex based? I agree that an RSSI controlled repeater could

[Repeater-Builder] Portable repeater and RSSI issues

for this anyway. The best repeaters are simple, and simple to use This is how I tackled the portable repeater problem for our emergency services: http://www.signals.net.nz/contributed/documents/VXP-820brochure.pdf Just my 10c worth. Regards to all Gareth Bennett - Original Message

Re: [Repeater-Builder] Re: Portable repeater and RSSI issues

, this is terminated via an N connector, giving the user access to other aerials if necessary. Nothing beats a good project like a PRU Regards Gareth Bennett - Original Message - From: vhsproducts To: Repeater-Builder@yahoogroups.com Sent: Thursday, August 06, 2009 10:40 AM Subject

Re: [Repeater-Builder] Portable repeater

Packaging, ease of use and battery life are way up there on the list. Without addressing these issues, It's just another portable repeater Have a look at this. This is what we made for Emergency services http://www.signals.net.nz/special_offers/ Either VHF or UHF. Regards Gareth Bennett

Re: [Repeater-Builder] HT750 vs CP200

Have you considered the Vertex Standard VX-821?

Re: [Repeater-Builder] Dual Receive Antennas

Put the yagi at the critical station location :-) Regards Gareth Bennett

Re: [Repeater-Builder] Circuit diagram for interfacing 2 maxon pm150 repeaters together

the active RX? ... Simple and it works . Cheers Gareth Bennett From: kerinvale To: Repeater-Builder@yahoogroups.com Sent: Saturday, June 13, 2009 12:31 AM Subject: [Repeater-Builder] Circuit diagram for interfacing 2 maxon pm150 repeaters together Would anyone have a simple diagram

[Repeater-Builder] O.T Faulty Anritsu Sitemaster Advice.

repair the front end of my machine, or is there any information on repairing the unit, service manuals etc so that we could repair this in-house. This has re-enforced the lesson that never lend out either your test equipment or your wife! All advice and suggestions welcome Regards Gareth Bennett

Re: [Repeater-Builder] Six-Meter Isolator Circulator

Hi Dan, Have a look at this link, exactly what you are after?? http://www.trademe.co.nz/Electronics-photography/Radio-equipment/Commercial/auction-223252310.htm Regards Gareth Bennett (Technical Services) Signals NZ Ltd 8 Manor Place P.O. Box 1439 Dunedin 9015 New Zealand Phone : 03 477-4342

[Repeater-Builder] (OT) APCO P25 horror stories anyone?

) are especially interesting for me, and would be very interested in hearing feedback from my colleagues from around the globe. Best regards to all Gareth Bennett

Re: [Repeater-Builder] Asntenna Painting

We just use common household bleach mixture to clean antennas that have been up there for ages, works a treat! Regards Gareth Bennett (Technical Services) Signals NZ Ltd 8 Manor Place P.O. Box 1439 Dunedin 9015 New Zealand Phone : 03 425-0895(64 3 425-0895) Fax : 03 474-5251(64 3

[Repeater-Builder] Zetron controller info needed

as the original documentation was lost ages ago when the original operator ceased trading. Any help would be greatly appreciated. Best Regards and thanks for reading. Gareth Bennett (Technical Services) Signals NZ Ltd 8 Manor Place P.O. Box 1439 Dunedin 9015 New Zealand Phone : 03 425-0895(64

Re: [Repeater-Builder] Tait tb7100 verses tb8100

The TB7100 is only a toy compared to the TB8100 series. Actually the '7100 series is made utilising Tait Mobile boards that dont quite make specification. Regards Gareth Bennett (Technical Services) Signals NZ Ltd 8 Manor Place P.O. Box 1439 Dunedin 9015 New Zealand Phone : 03 425-0895(64 3

[Repeater-Builder] EM to Ethernet interfaces

looking forward to your feedback and suggestions. Regards Gareth Bennett (Technical Services) Signals NZ Ltd 8 Manor Place P.O. Box 1439 Dunedin 9015 New Zealand Phone : 03 425-0895(64 3 425-0895) Fax : 03 474-5251(64 3 474-5251) Mobile : 027 458-8377 (64 27 458-8377) Email : [EMAIL

[Repeater-Builder] EMR Corp UHF cavity filters

Wavelength cans. Any help would be appreciated Gareth Bennett (Technical Services) Signals NZ Ltd 8 Manor Place P.O. Box 1439 Dunedin 9015 New Zealand Phone : 03 425-0895(64 3 425-0895) Fax : 03 474-5251(64 3 474-5251) Mobile : 027 458-8377 (64 27 458-8377) Email : [EMAIL PROTECTED

[Repeater-Builder] Zetron Model 49 Trunking controllers for sale

We have some surplus Zetron Model 49 Trunking controllers for sale, These are in As New condition as were set up and then put into storage as service spares that were never utilised. Model: 901-9147 Quantity: 7 Looking at $USD 600 each + Shipping Regards Gareth Bennett (Technical

[Repeater-Builder] EFJ Viking Base Stations F.S

Greeting group, We have the following E.F Johnson Viking Base Stations for sale: 10x 800 MHz 75 Watt (Immaculate condition) Model:242-2008-X32 Asking $USD $1,800 each Regards Gareth Bennett (Technical Services) Signals NZ Ltd 8 Manor Place P.O. Box 1439 Dunedin 9015 New Zealand Phone

Re: [Repeater-Builder] Re: ROIP interfaces

this helps? Regards Gareth Bennett - Original Message - From: ka1jfy To: Repeater-Builder@yahoogroups.com Sent: Friday, September 26, 2008 7:41 AM Subject: [Repeater-Builder] Re: ROIP interfaces What do you consider a reasonable price? And what features are you specifically

[Repeater-Builder] ROIP interfaces

? Wishing you all the very best Gareth Bennett

Re: [Repeater-Builder] FT-857 Remote Base w/o Control Head, Control Head Available?

Hi Robin, You should be able to get the control head as a spare part from any Vertex Standard dealer. Let me know if you have any problems. Regards _ Gareth Bennett (Technical Operations Manager) Signals New Zealand Ltd Direct

[Repeater-Builder] For Sale: Complete 800 MHz LTR repeater site equipment.

2x EMR Corp 26108 800 MHz Rx Multicouplers C/w Window filters 2x EMR Corp 665-49 800 MHz Duplexers 5x Stanilite KL Series 800MHz Repeaters Thanks for reading :-) Best Regards _ Gareth Bennett This email is confidential

[Repeater-Builder] Procom Duplexer instability

issues of transmitter foldback of power with this particular config. Any feedback or comments would be greatly appreciated! All the very best... _ Gareth Bennett This email is confidential, if you received this message in error

[Repeater-Builder] For Sale: 800 MHz Base stations, Combiners and LTR products

Regards _ Gareth Bennett This email is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you.

Re: [Repeater-Builder] CTCSS Information Required.

Hi Kevin, Sounds like you have a CTCSS board from a Tait T500. These are a specialty item and are probably more hassle to interface to a third party device. Regards _ Gareth Bennett This email is confidential, if you received

Re: [Repeater-Builder] CTCSS Information Required.

Give me a reminder email on Monday and I'll have a look to see if there are some old CTCSS decoders at work floating around like somthing from SALCOM that would suit the T300 for you. Cheers _ Gareth Bennett This email

Re: [Repeater-Builder] Unidenified diplexer

Hi Ian, Looks very Motorola like to me :-) Regards _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies

[Repeater-Builder] 800 MHz Repeaters

_ Gareth Bennett This email is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you.

Re: [Repeater-Builder] 23cm Granger rptr info

You probably have an old full duplex AMR Analogue Microwave radio deck, Those things are going back into the 80's to 90's :-) _ Gareth Bennett This email is confidential, if you received this message in error, or you

Re: [Repeater-Builder] GM 300 tone scan repeater

for CTCSS, making installation really easy! Just my 10c Regards _ Gareth Bennett This email is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender

Re: [Repeater-Builder] Linking two shared repeaters

link receiver in some instances. All the best for 08' Cheers _ Gareth Bennett This email is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy

Re: [Repeater-Builder] Re: Receiver overload

_ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you. - Original Message - From: skipp025 To: Repeater-Builder@yahoogroups.com

[Repeater-Builder] TKR-750 New PA Schematic

and thanks for reading _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you.

[Repeater-Builder] Update: Motorola Bidding to Acquire Control of Vertex Standard (Yaesu)

_ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you. - Original Message - From

Re: [Repeater-Builder] AWA repeater

Try googling Exicom in New Zealand. This was the crowd that took over production of the AWA repeaters as my memory serves me correctly. _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you

Re: [Repeater-Builder] IC FR4000

Whats wrong with the Vertex VXR-9000? _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you

Re: [Repeater-Builder] TKR-750 P/A Failures

, but the incredible amount of crap that this thing was spewing out all over the band, and into other channels on site when keyed. Once on site Spec-An proved the culprit pretty quick :-) Regards _ Gareth Bennett This e-mail is confidential

[Repeater-Builder] TKR-750 P/A Failures

? Interestingly we replaced the -750 with a Vertex VXR-9000 repeater and commissioning tests revealed about 3 dB better sensitivity than the 750's for 12dB Sinad. Regards _ Gareth Bennett This e-mail is confidential, if you received

[Repeater-Builder] Repeater maker for portables

suggestions as to a website? Thanks in advance _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you.

Re: [Repeater-Builder] Radio Tone Control

_ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you. - Original Message - From: Kent Chong To: Repeater-Builder

Re: [Repeater-Builder] Radio Tone Control

through the appropriate audio. Let me know if this is the down the track that you are interested in, and I can supply you more info. _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you

Re: [Repeater-Builder] 4W EM Remote

_ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you. - Original Message - From: Bill Powell To: Repeater-Builder

Re: [Repeater-Builder] fading desense

_ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return it to the sender and destroy any copies.Thank you. - Original Message - From: Ian Wells To: Repeater-Builder@yahoogroups.com

Re: [Repeater-Builder] fading desense

Ian, What weather conditions does this happen in? _ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return it to the sender and destroy any

Re: [Repeater-Builder] fading desense

brands of solar or wind charge regulators have been known to cause havoc with VHF/UHF repeater systems _ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please

Re: [Repeater-Builder] Re: Transmitter combining and Multicoupling information.

) But would like to know more theory and if possible the maths that go into proper transmitter combining. Thanks again for reading :-) _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you

[Repeater-Builder] Transmitter combining and Multicoupling information.

the system Especially the Transmitter coaxial stub information that usually is found on one spare combiner port. Thanks for reading :-) _____ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not th

[Repeater-Builder] Marconi 2955 Service manual

_ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return it to the sender and destroy any copies.Thank you. YAHOO! GROUPS LINKS Visit your group "Repeater-Bu

Re: [Repeater-Builder] Re: Need Plan info on handheld coverage in Business Band for 60 miles or so

Why don't you put a repeater inside each building and link them all via Ethernet/LAN? _ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return

Re: [Repeater-Builder] Building a Icom repeater HELP !!!!

for the crossover cable. Also you will need to solder some pads in the radio's to configure the correct audio to the option lead. With the crossover lead it's pretty much plug in and go. I'll get back to you Regards _ Gareth Bennett

Re: [Repeater-Builder] (OT) Accessory pinouts for GM399

Thats the first place that I looked but no GM399...Maybe its common to another model that I overlooked?? _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient

[Repeater-Builder] (OT) Accessory pinouts for GM399

Does anybody have the accessory pinouts available for the Motorola GM399 Mobile (rear option connector?) ... Or even better, a scanned manual that I could download? Thanks in advance _ Gareth Bennett This e-mail

Re: [Repeater-Builder] very close frequencies seperation

like between your link site and either repeater? This can easily be done. _ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return it to the sender

Re: [Repeater-Builder] internet via uhf commercial radio

_ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return it to the sender and destroy any copies.Thank you. - Original Message - From: Ian Wells To: Repeater-Builder@yahoogroups.com

Re: [Repeater-Builder] What is A Repeater??

w operator isnt good for the hobby. _________ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return it to the sender and destroy any copies.Thank you. - Original M

Re: [Repeater-Builder] adding a notch to bandpass cavity

temp in OZ at the moment? Regards _____ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return it to the sender and destroy any copies.Thank you. - Origin

Re: [Repeater-Builder] Re: Tait Repeaters

Good to see the Kiwis supporting OUR products! ...Hi Muzzo:-))) _ Gareth Bennett ZL4GB This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender

Re: [Repeater-Builder] Re: Aluminium ladders as towers

st my 10c worth _____ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return it to the sender and destroy any copies.Thank you. - Original Messag

Re: [Repeater-Builder] Re: Aluminium ladders as towers

s. ...How are the Maxon's going? _____ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return it to the sender and destroy any copies.Thank you. - Origin

Re: [Repeater-Builder] Narrow Band 1Mhz split on 470Mhz - Build

Nope, you would be better to run seperate TX and RX aerials with notch cavities to get the isolation. _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please

Re: [Repeater-Builder] Remote monitoring of repeater site

(Inc GST :-) _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you. - Original Message

Re: [Repeater-Builder] Icom IC_F420 repeater audio

You will need to place a pot in line for best results and to prevent overdeviation, 1K is about right. Just remember that there is NO limiting or processing on the audio (Raw in and output audio) Hope this helps _ Gareth Bennett

Re: [Repeater-Builder] Tait T-300 series VHF Repeater - Information Required, Narrow filters inside, want to use standard diviation for Ham Use

to narrowband the RX modules and change some R and C on the food chain. I've grown up with these in NZ so if you need any help dont hesitate to give me a holler :-) [EMAIL PROTECTED] ZL4GB _ Gareth Bennett This e-mail

Re: [Repeater-Builder] Re: 440 4 Pole Antenna

The third form is for 13-14 year old students in New Zealand or third year in high school (Up to 7th form). _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient

[Repeater-Builder] Maxon SMP-4004 Software

would be eternally grateful :-) Thanks for reading, and Merry Christmas _ Gareth Bennett This e-mail is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender

Re: [Repeater-Builder] Transmitter combiners

your help! _____ Gareth Bennett This e-mail is confidential, if you received this message in error, or youare not the intended recipient,please return it to the sender and destroy any copies.Thank you. - Original Message - From: Ian Ashford To

[Repeater-Builder] Transmitter combiners

d large amounts of time hacking off coax :-) Any formula would be appreciated. I have tried to reverse engineer what we have in service to gain some formula, but nothing makes sense. Can anybody remember? Thanks in advance :-) _________ Gar

Re: [Repeater-Builder] tait 2010

other neat features that you could implement later :-) If I was putting together a budget community network this is one of the avenues that I would pursue, especially if cost was an issue. Cheers; Gareth Bennett Yahoo! Groups Links * To visit your group on the web, go to: http

Re: [Repeater-Builder] tait 2010

to catch up for a beer :-) Ive wasted enough B/W for now, If there is anything that I can do to help you, please dont hesitate to give me an e-mail [EMAIL PROTECTED] Cheers _ Gareth Bennett This e-mail is confidential, if you received

Re: [Repeater-Builder] tait 2010

T2010's (Will they pass CTCSS witithout regeneration?) Also what PSU are you running? If there is mains hum (Hence reason NOT to use 100 Hz subtone) this will bugger you up no end. Just a few questions as starters and we can go from there :-) Cheers; Gareth Bennett Comme Engineer Electrix Ltd

Re: [Repeater-Builder] tait t2010

Have some in NZ... What are you after especially? Cheers; Gareth Bennett - Original Message - From: ian wells [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Monday, November 01, 2004 11:27 AM Subject: [Repeater-Builder] tait t2010 would anyone have a tait t2010

Re: [Repeater-Builder] To adjust or not....

If you adjusted the PA down to a lower power, what says the O/P Z is still a perfect match for your duplexer? I have seen solid state Power amps behave inefficiently at less output power than they have been rated for, either being from less drive or from Tweeking the tuning caps on the PA.

  1   2   >