mnd wrote:
> Thank you very much, is the 2.25.02 available for download from
> Qnapclub? QTS app center does not show the update for me, currently
> 2.25.01 is installed.
@digimaster Do you have 2.25.02 ready to use? Can you publish on
qnapclub?
Sent from my iPhone using Tapatalk
NAS:
Zombie wrote:
> What's that? Don't find it on my NAS. I have TS-251+, some 5 years old
> maybe...
I'm not the most qualified to answer that, I would explain it as the
"service" that interprets the commands in the command prompt.
The older versions do not support all arguments used in the
Zombie wrote:
> Are there still problems upgrading to Qlogitechmediaserver 2.25.01?
> Hoping for a straightforward upgrade without fiddling with Putty and
> other stuff, is there any chance for that?
> Wise from previous upgrades I have no automatic upgrading of my LMS
> server.
It depends on
I also see problem on QNAP TS-439+ pro II QTS 4.2.6
See example below and attached log files...
Code:
[admin@QNAP2 LogitechMediaServer]$ ./QLogitechMediaServer.sh stop
/sbin/notice_log_tool: invalid option -- T
Usage: /sbin/notice_log_tool [OPTION]...
@Digimaster
It seems like we are a few with an older version of BusyBox not
supporting your the commands you run in QLogitechMediaServer.sh.
Would it be possible to somehow make use QOptware-NG, I have it
installed but I don't know what it takes to QLogitechMediaServer.s to
running Grep and
Hi Digimaster...
I tried upgrading QLMS to latest version, but it seems the scripts are
not compatible with my unit...
I used to run previous version, I got a lot of errors of bad command
during launch bad then it run fine.
I upgraded from the AppCenter...
Please find my
garym wrote:
> was the boom synched with your SB3?
No, players were standalone .
Sent from my iPhone using Tapatalk
NAS: QNAP TS-459U+ QTS 4.2.6 (4x 2TB, RAID5)
Services: LMS 8.2.0 by QLMS 2.21.00 'QLMS at QNAP club'
(https://www.qnapclub.eu/sv/qpkg/545)
Squeezebox: 6x Receiver, 3x
Somehow this were related to another player, I had a BOOM in another
room that were in a disconnect state.
After rebooting that player (long press on the power button) both
players are now as good as ever.
Very odd... no clue what could have caused this.
NAS: QNAP TS-459U+ QTS 4.2.6 (4x 2TB,
kidstypike wrote:
> Failing power supply? Swap power supplies with the one from the working
> SB3.
Thanks, tried to switch the units, including power supplies and other
setups. No difference.
NAS: QNAP TS-459U+ QTS 4.2.6 (4x 2TB, RAID5)
Services: LMS 8.1.0 by QLMS 2.21.00 'QLMS at QNAP
I'm running latest nightly for LMS 8.2.0 (using QLMS solution form my
qnap NAS).
Lately one of my SB3 player started to disconnect from the system.
I have one more that works fine.
After some tinkering I can get it to be listed in the LMS UI, but as
soon as I try to play something on it is
By the way, I have som trouble running QLMS from Putty.
And starting QLMS service takes a really long time know, or finishing
the script takes long the service starts quickly.
But if I end Putty before finishing the script then LMS stops/crash.
I get a bunch of warnings that the commands are
@digimaster I asked many time before about avahi/bonjour support, today
I found a sections in the Server Discovery about Bonjour.
There where several settings there, which bonjour-services needs to be
enabled to do Spotify connect on the local network?
Are there other prerequisites as well?
Bonjour / avahi support
Could you have a look if you can get this working again so that Spotty
can Announce players on the local network. As of now there are some
conflict so Spotty automatically disables this.
Or do I have to do something on my system?
We discussed this before and I got this
It sounds you had the QLMS upgrade to trigger an upgrade of LMS to 8.0.
That happened to me and I got similar problem like you describe.
You can try to start in failsafe mode manually, that will probably work.
If it does it means that you have some plugins that dont run with LMS
8.0.
You can
I was doing a manual restart of QLMS and I noticed a few cosmetic
issues.
There is still a grep command using a parameter not supported
Code:
Starting LogitechMediaServer in the Background.
\e[41mWaiting for LogitechMediaServer
digimaster wrote:
> The missing logo in the appcenter, has some thing to do with QNap I
> suspect.
>
> Send from my mobile Phone
Yes it is, I tried form different computer, so it is not a browser
thing.
Do you know what could be the problem?
I got the problem when upgrading to 2.10.06.
In
Works great here as well. Not using GoogleMusic though.
I have a missing logo for QLMS in AppCenter for QnapClub, all other
logos are there, including the one I have QLMS on home screen.
The logo is there for a second as I enter AppCenter but the disappears
to a missing image link.
I tried
Thanks!
Now I'm back in business again.
I was a bit worried that I had to redo all my settings there, but
Imanaged to get it all back.
However I learned some potential pitfalls.
I apparently had nomajor=0 and whenever I was to do a manual restart
that would have triggered the 8.0 upgrade.
As
How can I downgrade to 7.9.2?
QLMS upgrade me to 8.0.0 without asking on the upgrade.
I believe its custom clock helper that is not 8.0.0 compatible.
Sent from my iPad using Tapatalk
NAS: QNAP TS-459U+ QTS 4.2.6 (4x 2TB, RAID5)
Services: LMS 7.9.2 by QLMS 2.03.01 'QLMS at QNAP club'
The Icon of QLMS seems broken on QnapClub see attached image.
+---+
|Filename: Clipboard01.png |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=29836|
Output from . /QLogitechMediaServer.sh config
Code:
[The bash shell] : GNU bash, version 3.2.57(10)-release (i686-pc-linux-gnu)
Copyright (C) 2007 Free Software Foundation, Inc.
[The Qnap configuration] :
[QPKG Share] /share/MD0_DATA
[Packages Root]
@Digimaster
I thought i do some maintenance as I'm just hanging around at home in
these Corona-times...
I saw the 2.10.6 upgrade available on Qnap club, I was on 2.10.2
before.
I proceeded with the upgrade but was stuck on 80% for hours.
So I did a restart of my qnap.
-QLMS did not start by it
When upgrading I get the following message:
"[12:45:22 12-10-2019] Can't find /var/run/dbus, please fix error and
restart !"
After a QNAP restart everything works fine.
I had this message for the last coupe of releases.
Apart form that QLMS works fine, including exposing my Spotty Connect
digimaster wrote:
> bonjour/avahi
Hi, if you have a look at it could you see if you can get Spotty work in
mode that anyone on the LAN can use Spotify Connect without having to
add the accounts in the Spotty app.
As of now I can only use Spotify Connect for accounts registered in the
Spotty
digimaster wrote:
> Oke strange it tells that option r, is not some thing it can handle.
> Not that a big a trouble, as it will use chroot if start-stop-daemon
> give a error.
>
> You could do [ touch .CHROOT ], in the .qpkg/LogitechMediaServer
> directory.
> Then it will not use
I noticed recently that I get an error message in my log file.
Apart from that everything runs fine and smooth, so it is just an
annoyance.
Code:
[12:50:14 28-04-2019] LMS will start with: [--daemon --httpport 9001 --user
squeezeboxserver --pidfile
jasell wrote:
> Hi, I finally got time to do this...
> I got it working but I have two quirks left...
> - I cannot access the Plugins section on the settings page.
> - I get a new message in the log-file
> >
Code:
> >
> [18-12-26 1
digimaster wrote:
> Yes if its installed from QNap Club app store, you can not install it
> manually.
> But are you sure, the x86_64 will work?
>
> But you could try it.
> Logon with shh shell.
> Do [ cd /share/*/.qpkg/LogitechMediaServer ]
> Then [ cp -RP SlimServer/Cache /share/*/Download/ ]
digimaster wrote:
> *
>
>
>
> No need to uninstall any old lms installations, from version 2.00.00,
> can be installed beside any other lms or perl installations.
>
> 'How to add the Qnapclub store to the QNap App center'
> (https://www.qnapclub.eu/en/howto/1)
>
> 'The latest
digimaster wrote:
> You must setup one spotify accont in LMS.
> And after that, and enable spotify connected on the player page.
> Then it works.
My original question regarding this was to avoid this.
Pre-registering Spotify accounts is not required if players can be
announced on the local
digimaster wrote:
> I did not special. Just add a account to Lms. And in the setting pages
> for every player set Spotify actieve.
>
> Send from my mobile Phone
Ok, I see.
I wish to avoid to add the Spotify account into LMS Spotty.
If the players can be announced on the local network this
@Digimaster if I may add request of functionality in your excellent work
on QLMS.
We do mostly use Spotify as source now a days. Being a family with
several acounts it is possible to switch between those, even though it
is a bit cumbersome. But when friends are visiting they cannot use their
Thanks, it did work this morning. 24h self-healing system, wow!
Operation is much faster, you are amazing!
Sent from my iPhone using Tapatalk
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, QLMS- 1.07.3-'QLMS at QNAP club'
(https://www.qnapclub.eu/sv/qpkg/545)
digimaster wrote:
> Plugin pages some is slow in the beginning. That because you uses cache
> and prefs, which in the past where used in another installation.
> Regarding error not that big a problem.
>
> Send from my mobile Phone
After upgrading to QLMS 2.00.02 I get these feedback after a
digimaster wrote:
> That's strange should choice the right version itself.
> I think this should be reported!.
>
> You could download is you're self and then install it.
> Don't know if that works .
>
> Fixed especially for you, from version 2.00.02, you should be able to
> install it.
> Made
On my system that I upgraded from QLMS 1.08 I cant acces the the page
settings/plugins I just get waiting...
When doing a manually stop/start from command prompt
(./QLogitechMediaServer.sh start) I get an error msg:
/.QLMS.func: line 157: [: too many arguments
But it starts anyway...
Do I
Ps. Do I need to manually install cheroot? If so, where do I found it?
Sent from my iPad using Tapatalk
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, QLMS- 1.07.3-'QLMS at QNAP club'
(https://www.qnapclub.eu/sv/qpkg/545)
Squeezebox: 6x Reciever, 3x Boom, 2x
Both my qnap systems get the same problem when selecting QLMS from the
appcenter. Downloading and installing the _64 version manually works.
Sent from my iPad using Tapatalk
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, QLMS- 1.07.3-'QLMS at QNAP club'
digimaster wrote:
> You dont need to uninstall the older version.
> But i think you're trying to install the x86 version, but you should
> install the x86_64 version.
> You could check it bij logon through ssh shell, and then do uname -m
> where it will properly says x86_64
Uname -m gives
Hi,
I had QLMS 1.08 (I think) and in my Appcenter I had an update.
I tried it and the system stated to upgrade to QLogitechMediaCenter
2.00.01
During the installation I got the following error
Code:
Type DateTimeUsers Source IP Computer name
Hi,
I can try to install it on my spare qnap.
Were do I find the installation package?
Sent from my iPad using Tapatalk
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, QLMS- 1.07.3-'QLMS at QNAP club'
(https://www.qnapclub.eu/sv/qpkg/545)
Squeezebox: 6x
earthbased wrote:
> Yes, if auto-update is enabled which I think is the default setting.
QTS will o force the upgrade, but if you do a manual start of QLMS from
command prompt then the default behavior is to download latest nightly
and install it.
Sent from my iPhone using Tapatalk
NAS:
digimaster wrote:
> Yes that will be possible.
> But that's why I'm looking at a way, to prevent that kind off errors. I
> think to have a solution for this. But please give me some time.
>
> Send from my mobile Phone
Thanks! No hurry, I can do with PCM transcoding for now.
NAS: QNAP
Hi,
QLMS has worked flawlessly for the past year or so!
Performance is much better than the old SSOTS solution.
Just recently I made a stop & start to retrieve the last update as a
regular maintenance job.
I made an upgrade from 7.9.2 something to latest 7.9.2 1536946607
It seems as the latest
Hi Digimaster,
I just want to report the the upgrade QLMS 1.07.03 went smooth on my
system, without any hick-ups.
It took a longtime though, I think this was due to an update of the LMS
nightly as well.
-It might be a good idea to add a INFO note to the log that QLMS updates
the nightly, and
digimaster wrote:
> Those messages are from with in lms. Already tried the upgraded through
> the appstore to v1. 07.2?
> Curious how that goes on you're end, all the fix are included.
>
> Send from my mobile Phone
I just tried the upgrade from within QNAPstore.
The update went smooth, no
digimaster wrote:
> What you could try, in the .QLMS.conf file place a # in front of the
> line SUDO and RENICE.
> You're QNap nas behave very strange, and as i wrote, some thing went
> wrong when you tried to add spotty on some way.
> Looks like sudo/renice or bash behave strange or are on one
I'm sorry to say but i cannot get the "official" 1.07.1 from qnap club
to run.
I made a clean install.
-I stopped QLMS (1.07.0), made sure no left over process was running.
-Remove QLMS from appcenter
-Made a system reboot
-Then add the QNAP club repo to appcenter (eu-version)
-Installed QLMS by
jasell wrote:
> I noticed when installing the Spotty plugin in QLMS the spotty process
> launched as admin.
>
> After stopping QLMS and adjusting ownership and access (CHOWN/CHMOD)
> and then starting QLMS spotty now run as squeezebox server.
>
> Before I could only play
digimaster wrote:
> Qnapclub repo was down, due to trouble.
> At the moment they rebuild the repo, should it should be fixed soon.
I noticed when installing the Spotty plugin in QLMS the spotty process
launched as admin.
After stopping QLMS and adjusting ownership and access (CHOWN/CHMOD)
and
digimaster wrote:
> Oke nice that it seems to work now.
> Which version do you use now.
> And yes maybe there was some thing wrong in the nightly build, we have
> to keep in mind its a nightly build so for testing only.
>
> But a strange thing you write thats kill -9 give you a error, this
>
digimaster wrote:
> Very strange behavior, but what i read out off all the logs is, that
> there already is a copy off LMS running.
> And it can be started twice, with out errors.
> [ FATAL: There is already another copy of the Logitech Media Server
> running on this machine. (Address already in
digimaster wrote:
> Very strange behavior, but what i read out off all the logs is, that
> there already is a copy off LMS running.
> And it can be started twice, with out errors.
> [ FATAL: There is already another copy of the Logitech Media Server
> running on this machine. (Address already in
digimaster wrote:
> Yes that can be right, as it starts children process.
>
> Send from my mobile Phone
This entry for instance...
Code:
[18-02-11 23:33:50.6226] Slim::bootstrap::tryModuleLoad (286) Warning:
Module [Slim::Display::Squeezebox2] failed to load:
digimaster wrote:
> Yes that can be right, as it starts children process.
>
> Send from my mobile Phone
But the multiple instances of LMS seems to be a problem, one of them,
there are a lot of things that doesn't work here...
Code:
[18-02-11 23:26:25.3475] main::init
digimaster wrote:
> Looking at the logs, that's not the case. What you could try. Go to the
> QLogitehMediaServer directory. Then. /LogitehMediaServer.sh stop, chmod
> -R 0777 . Perl/. And then . /LogitehMediaServer.sh restart.
>
> Send from my mobile Phone
When I stop and start QLMS from app
digimaster wrote:
> Looking at the logs, that's not the case. What you could try. Go to the
> QLogitehMediaServer directory. Then. /LogitehMediaServer.sh stop, chmod
> -R 0777 . Perl/. And then . /LogitehMediaServer.sh restart.
>
> Send from my mobile Phone
This doesn't help, log looks little
digimaster wrote:
> Try a reboot of you're NAS system.
>
> Send from my mobile Phone
I tried a system reboot.
slimserver.pl i running but [ ./LogitechMediaServer.sh status ] says
LogitechMediaServer is not running.
see log files, I cleared them before the reboot...
Web GUI loads but with no
digimaster wrote:
> Oke new release is out, where it should be fixed.
>
> 'QLogitechMediaServer V1.07 QTS 4.2 or Higher and x86_64/x86/i686'
> (https://www.dropbox.com/s/vjvlqx8f2y08lxs/QLogitechMediaServer_V1.07_QTS-4.2_or_Higher_x86_64-x86.zip?dl=0)
>
> So please try this version ?
OK, I'm
digimaster wrote:
> Oké but what I do mis, is the complete logfile. Don't understand when
> you write, that you hat to kill it from command line?
>
> Send from my mobile Phone
Complete log file?
When QLMS launched ok and I installed spotty, spotty did not work.
There were several entries from
jasell wrote:
> I'm using a QNAP TS-439 Pro II+ which is running QTS 4.2.6 build
> 20171208 (the latest version for this model).
>
> I have only the Download app running apart from QLMS.
>
> I used to run SSOTS-LMS, when getting Spotty to work I had to install
> the P
digimaster wrote:
> Yes please could you send the logfiles. And tell me which model and QTS
> you're using?
>
> Send from my mobile Phone
I'm using a QNAP TS-439 Pro II+ which is running QTS 4.2.6 build
20171208 (the latest version for this model).
I have only the Download app running apart
digimaster wrote:
> Try this.
> Logon by ssh shell, do [ cd /share/*/.qpkg/LogitechMediaServer
> [ ./LogitechMediaServer.sh stop]
> [ rm -R /opt ]
> [ chown -R squeezeboxserver:everyone SlimServer/]
> [ chmod -R 0755 SlimServer/ ]
> [ ./LogitechMediaServer.sh start ]
> [ ./LogitechMediaServer.sh
digimaster wrote:
> We found the problem, the old optware is messing up youe system.
> I would suggest to remove it from the appstore, and install a proper
> Optware solution.
> The thing i learned from this is, not to let the script not use any
> other program then those supplied by Qnap.
>
>
digimaster wrote:
> But strangs as it says, that is already running.
> Should say Starting LogitechMediaServer in Background.
>
> But in youe case, says it already running very strangs.
>
> But i think i have a idea where it goes wrong on youe end.
> Could you do ./LogitechMediaServer.sh stop.
digimaster wrote:
> If it symlinked to /opt ?
> If so just do rm /opt.
>
> Would not remove the optware, as you properly uses for other things.
> In my case i have Optware-NG enabled and running on /opt, and no trouble
> at all.
I did not install it directly. I installed the qpkg for PERL
digimaster wrote:
> Oke could you now do thing to make it work, i believe you did chown -R
> admin SlimServer/.
> Then ./LogitechMediaServer.sh start.
>
> If it now it start, could you show me the last part of
> LogitechMediaServer.log.
Starts directly
The last lines in the QLMS.log from the
digimaster wrote:
> And there lays you're problem.
> Thats where is goes wrong.
> Good to know, already adjust the script, so this error wont happen
> again.
>
> But please could you do the test, as you should not set ownership to
> admin on SlimServer/
Can I delete the Optware folder (now
qnapfan wrote:
> @jasell
> we need the second part from the log ;-)
Second part...
Code:
The following modules are loaded after the second attempt:
DynaLoader.pm =>
/usr/local/perl/lib/5.24.0/i686-linux-thread-multi/DynaLoader.pm
jasell wrote:
> It does not start, here is the log.err
>
After commenting SUDO=1 and trying start it still won't start,
log.err...
Code:
Got @INC containing:
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer
/usr/local/perl/lib/site_perl/5.24.0/i686
digimaster wrote:
> Just for testing could you do ./LogitechMediaServer.sh stop.
> Then from LogitechMediaServer directory do chown -R squeezeboxserver
> SlimServer/, and chmod -R 0755 SlimServer/
>
> After this try ./LogitechMediaServer.sh start
> If it give the error again, please send me the
jasell wrote:
> In .QLMS.conf I have SUDO=1
>
> I have sudo in an old Optware folder, now foo.Optware.
> I changed name to avoid interfereance with QLMS.
>
>
> Sent from my iPhone using Tapatalk
When executing...
Code:
[/share/MD0_DATA/.qpkg/foo.
qnapfan wrote:
> try to execute sudo (propably it is in path) by simply calling sudo from
> the shell or try to find it.
In .QLMS.conf I have SUDO=1
I have sudo in an old Optware folder, now foo.Optware.
I changed name to avoid interfereance with QLMS.
Sent from my iPhone using Tapatalk
qnapfan wrote:
> ok, just to be sure, can you please check, wether you have sudo
> (propably opt install)
How do I check?
Sent from my iPhone using Tapatalk
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
Squeezebox: 6x Reciever, 3x Boom, 2x SB3
qnapfan wrote:
>
> @jasell
> Did you use sudo (can be changed in the config) ?
No, I did no modifications, just installed OOTB.
Slimserver.pl is owned by SqueezeboxServer
in my resource manager.
Sent from my iPhone using Tapatalk
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
digimaster wrote:
> Oke looked at the source, and the info from Qnapfan.
> Also tried same stuff, and change a few things.
>
> Please do a clean install with this beta. 'QLogitechMediaServer V1.06.d
> for QNap QTS 4.2 or higher' (https://goo.gl/p6N1kJ)
>
> If it wont start, there will be a
digimaster wrote:
> Oké there it is, a problem with a CPAN module. That I have to ask
> Qnapfan, as he compiled the i686 perl.
>
> Send from my mobile Phone
oki.
I appreciate you effort and support!
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
digimaster wrote:
> Try SlimServer/SlimServer.pl.pl --user squeezeboxserver --httpport 9001.
> After that pidof SlimServer.pl I think that will work,
>
> Send from my mobile Phone
Code:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./SlimServer/slimserver.pl
digimaster wrote:
> The symlink I wrote is good. But then it works. Oke and if that works,
> from the LogitehMediaServer directory try SlimServer/SlimServer.pl
> --help. What does it shows then?
>
> Send from my mobile Phone
Code:
digimaster wrote:
> What does perl -v do?
>
> Send from my mobile Phone
perl -v does not work unless I start with setting the symlinks as you
posted earlier.
is there a way to set them to be persitent?
if I do... I get...
Code:
digimaster wrote:
> A very strange problem, as with pidof it give a number.
> Could you try the following [ ps | grep [L]ogitech ]
>
> Also strange it seems the perl can run if you do perl -V.
> You don't have anything else installed which is using poort 9001
>
> What you could try is kill -9
digimaster wrote:
> /lib/
>
> Send from my mobile Phone
I have two qnap-systems... one that is running LMS on SSOTS as I'm
playing around with the other to get your new QLMS running...
I check the /lib/ folder on the other system as well, it also have the
same ld-2.6.1.so
Both systems are
I still get the same process ID, it has been running for hours now.
When browsing to serverIP:9001 I get error messages
ERR_EMPTY_RESPONSE
Sent from my iPhone using Tapatalk
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
Squeezebox: 6x Reciever, 3x
digimaster wrote:
> /lib/
>
> Send from my mobile Phone
I searched in /lib/ and through the file system no ld-2.25.so to be
found.
Can that be added/installed in some way?
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
Squeezebox: 6x Reciever, 3x
digimaster wrote:
> Oké think that you, re ld-linux.so.2 is wrong symlinked. Check if
> ld-2.25.so exist and do a symlinked to ld-linux.so.2.
>
> Send from my mobile Phone
Two questions...
Where should I look for ld-2.25.so? in /lib/ I only have ld-2.6.1.so
How do I do a symlink that is
digimaster wrote:
> A NEW BETA RELEASE FOR QLOGITECHMEDIASERVER, WITH SUPPORT FOR
> ARCHITECTURE X86/I686.
> CHANGE SOME MINOR THING ON INSTALLATION AND INIT-SCRIPT.
> ON QTS 4.2 WITH X86_64 WITH A MIXED OF ELF32/ELF64 ENVIRONMENT, THE FILE
> /LIB/LD-LINUX.SO.2 IS NEEDED TO MAKE PERL WORK.
> SO
digimaster wrote:
> Oké the correct perl is installed. Do chmod -R 0775 SlimSlimServer/ in
> the LogitehMediaServer directory. And then try starting it again.
>
> Send from my mobile Phone
ok, now i get some more...
Code:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] #
digimaster wrote:
> Oké with the chmod I forget do chmod -R 0775 SlimServer. Could you also
> do in the LogitehMediaServer cat .Perl/perl-version?
>
> Send from my mobile Phone
.Perl/perl-version?
Code:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # .Perl/perl-version
digimaster wrote:
> Stranges because if you read the log, looks like I issue with own er
> right. Could you do ( which perl) and (perl - v). Check if
> /lib/ld-linux.so.2. And do (cd /share/*/.qpkg/LogitehMediaServer) and
> then (chmod
> -R SlimServer/) and (chown -R squeezeboxserver
digimaster wrote:
> Have you check the LogitehMediaServer directory, if there a. Perl
> directory, and look if there is a LogitehMediaServer. log.
>
> Send from my mobile Phone
Yes, there is a LogitechMediaServer/.Perl
This is my LogitechMediaServer.log
Code:
digimaster wrote:
> Oke keep in mind, this is only a beta version, so can do strange things
> on you're system.
> But with a lot off help by Qnapfan, there now also is support for
> x86/i686 Qnap systems.
> It will also work for those how own a mixed x86_64 nas systems running
> on QTS 4.2
>
>
digimaster wrote:
> Qnap fan did a great job and made a ELF32 Version of perl with
> spotty/youtube support. So a beta is coming up. Have to find away to
> make a proper install on a mixed ELF64/ELF32 Qnap nassystem.
>
> Verstuurd vanaf mijn Mi A1 met Tapatalk
Great, let me know if you need
qnapfan wrote:
> @jasell
>
> your did not "damaged" your libnsl.so.1 as you are running QTS 4.2x
> (like me) we have a 64 kernel and some librarys are 32 bit (got this
> information from the german qnap forum) you have to use the upcomming
> package from digimat
digimaster wrote:
> Why is there a error on /lib/libnsl.so.1, as the error is thats its a
> ELF32 and not ELF64.
> You can use ELF32 file beside other on QNAP, but PERL is a interpreter
> and the file and libs it needs, have to be ELF64.
> And there lays you're error, why LMS wont start, as Perl
digimaster wrote:
> Thats strange, there is a lib file which does not has the good arch.
> Could you do file /lib/libnsl.so.1 ?
> If correct will point to another file, and then do file with the name of
> that file.
>
> Are you on a ELF64/x86_64 QTS QNap or ELF32/X86(i686,i386) QTS QNap ?
> As
Still not working for me...
I tried to upgrade to the new 1.05 version.
First I uninstalled the previous verison from Appcenter, made a reboot.
Manually installed the 1.05 version.
I got a few "warnings" stating is was still up Upgrading.
At the end I got a warning:
"[QLogitechMediaServer]
digimaster wrote:
> Looks like it's running, could you do. /LogitehMediaServer.sh status in
> putty?
>
> Which Qnap and QTS are you using ?
>
> Send through tapatalk!
This is what I get...
Code:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
Hi,
I have trouble to succesfully install this.
I download the zip-archive, unzip the files, an from QNAP I do a
manually install browsing to "LogitechMediaServer_1.02_x86_64.qpkg" and
then select install.
During this process, which take close to a minute, I get a warning:
[LogitechMediaServer]
Nice!
Works great both on my iPhone and as a chrome-app window.
A few commenst/ideas/requests right of the bat...
- Volume bar is not that intuitive, is it possible to use a long ramp
instead?
- an additional dark theme?
- As a chome-app I use it as a side bar and could make use of an even
more
Now the log file looks like this wit just a few errors concerning
flac...
[17-01-10 00:18:41 ] ssctrl Starting SqueezeboxServer
7.9.0-1483603909.
[17-01-10 00:18:42 ] ssctrl Command line =
/opt/ssods4/var/home/SqueezeboxServer/slimserver.pl --daemon --pidfile
1 - 100 of 102 matches
Mail list logo