After a recent system panic, the zones service failed to start due to
the first zone failing to boot. The boot fails with
ERROR: could not open master side of zone console for wiki to acquire
slave handle: Device busy
I tried detaching and reattaching the zone but this didn't change
On 03/21/12 01:50 AM, skeletor wrote:
20.03.2012 14:41, casper@oracle.com пишет:
Have you tried making the zone into a zone with exclusive IP stack?
(Using a vnic, etc)
Then the zone can add the routes as needed
Casper
No, i havn't. I use share IP stack.
For what you are trying to
On 02/20/12 10:06 PM, gerard henry wrote:
hello all,
after upgrading from S11X to S11, i'm unable to attach a zone due to a
missing publisher. I'm trying to remove the old publisher but i have this:
root@electre:~# pkg -R /zones/test_bd/root/ publisher
PUBLISHER
On 02/20/12 10:48 PM, gerard henry wrote:
hello,
snip
Enter user name for system maintenance (control-d to bypass):
the bug ID 7116113 gives the following workaround:
Increase the system/name-service/upgrade start method
timeout_seconds to a value larger than 60 seconds.
Say 300 seconds
On 02/21/12 03:31 PM, Edward Pilatowicz wrote:
On Mon, Feb 20, 2012 at 02:56:23AM -0800, Ian Collins wrote:
It wont let you remove the one with the queer URI (where doe that
come from I wonder?), but it doesn't appear to do any harm.
assuming that the queer uri is the proxy:// one, that one
On 02/ 9/12 02:13 PM, Will Fiveash wrote:
I used to be able to configure zones a while back but now I'm stumped
(using released S11). What I want is a set of zones, each with a unique
IP address such that they can ping each other and the global zone. I used to
use a zonecfg
of:
create
set
On 02/ 9/12 02:24 PM, Will Fiveash wrote:
On Wed, Feb 08, 2012 at 07:13:10PM -0600, Will Fiveash wrote:
I used to be able to configure zones a while back but now I'm stumped
(using released S11). What I want is a set of zones, each with a unique
IP address such that they can ping each other
On 02/ 2/12 09:04 PM, Ian Collins wrote:
Hello again,
I have just tried sending a zone from an Express system to a Solaris 11
system.
I didn't find the cause on this system, but sending the original
datasets to another Solaris 11 box and performing the upgrade attach
there worked OK.
Very
Hello again,
I have just tried sending a zone from an Express system to a Solaris 11
system.
The original ZFS filesystems were
fileserver/zones 1.73G 29.2T
35K /zones
fileserver/zones/agdos 731M 29.2T
33K
On 12/15/11 04:27 AM, Enda O'Connor wrote:
On 12/14/11 03:30, Ian Collins wrote:
Hello,
I just tried booting a Solaris 10 branded zone after upgrading its host
to Solaris 11 (from Express) and it migrated OK, but won't boot:
# zoneadm -z sandpit boot
zone 'sandpit': WARNING: vnic3:1
On 12/15/11 07:38 AM, Hung-Sheng Tsao (Lao Tsao 老曹) Ph.D. wrote:
On 12/14/2011 1:27 PM, Ian Collins wrote:
On 12/15/11 04:27 AM, Enda O'Connor wrote:
On 12/14/11 03:30, Ian Collins wrote:
Hello,
I just tried booting a Solaris 10 branded zone after upgrading its host
to Solaris 11 (from
On 12/15/11 07:48 AM, Frank Batschulat wrote:
On Wed, 14 Dec 2011 19:48:09 +0100, Ian Collinsi...@ianshome.com wrote:
may be you need to run attach -U instead
-U? There isn't a documented -U option.
zoneadm attach -U was a new feature we introduced with s10 Update 9
to perform a full
On 12/15/11 04:16 AM, Mike Gerdts wrote:
snips
At this point, the zone should be bootable on Solaris 11.
I've filed:
7121298 dsconvert should prevent conversion if not at right S10 patch level
Sorry for the troubles you had.
I'm away for a couple of weeks, so I'll try this and report back
I just created my first zone on Solaris 11. Congratulations on the new
configuration screens, they are a big improvement.
--
Ian.
___
zones-discuss mailing list
zones-discuss@opensolaris.org
On 12/14/11 04:48 PM, John D Groenveld wrote:
In message4ee8183b.2050...@ianshome.com, Ian Collins writes:
The zone originally came from a Solaris 10 update 9 system. How do I go
about patching it?
Can you v2v the zone back to an S10 system and then apply the latest
patches there?
I
On 12/14/11 05:06 PM, Mike Gerdts wrote:
On Wed 14 Dec 2011 at 05:02PM, Ian Collins wrote:
On 12/14/11 04:54 PM, Ian Collins wrote:
On 12/14/11 04:48 PM, John D Groenveld wrote:
In message4ee8183b.2050...@ianshome.com, Ian Collins writes:
The zone originally came from a Solaris 10 update 9
On 12/ 2/11 06:07 AM, Derek McEachern wrote:
System has 72GB RAM
xeon cpu - 2 socket - 4 core - 16 thread
zonereoot is on ufs filesystem on it's own drive, separate from OS.
That (UFS) is a strange choice for a recent Solaris 10 version. You
loose the useful zones/ZFS features such as
On 12/ 2/11 05:39 AM, Derek McEachern wrote:
Have a peculiar problem that I haven't seen before.
When starting a system that has about 35 - 40 zones on it occasionally
we see that one of the zones doesn't come up properly. You can log
into the zone but none of the /etc/rc3.d scripts have been
On 12/ 2/11 10:30 AM, Derek McEachern wrote:
On Thu, Dec 1, 2011 at 2:48 PM, Ian Collins i...@ianshome.com
mailto:i...@ianshome.com wrote:
On 12/ 2/11 05:39 AM, Derek McEachern wrote:
Have a peculiar problem that I haven't seen before.
When starting a system that has
On 12/ 2/11 10:36 AM, Derek McEachern wrote:
We haven't made the jump to zfs yet :-) We do loose some useful
features but haven't spent the time to port our stuff over to use zfs.
Make the jump sooner rather than later or you will flounder on Solaris 11.
--
Ian.
On 11/12/11 03:24 AM, Mike Gerdts wrote:
On Fri 11 Nov 2011 at 09:41AM, Ian Collins wrote:
On 11/11/11 09:20 AM, Mike Gerdts wrote:
On Fri 11 Nov 2011 at 08:41AM, Ian Collins wrote:
Solaris 11 Express with the latest updates from the support repo.
I'm getting an odd problem creating zones
On 11/11/11 02:39 AM, Mike Gerdts wrote:
On Thu 10 Nov 2011 at 08:32PM, Ian Collins wrote:
On 10/10/11 07:20 PM, Edward Pilatowicz wrote:
On Fri, Oct 07, 2011 at 12:23:30PM -0700, Michael Speer wrote:
All,
I have two questions based on what I have been seeing where I don't see
packages
On 11/11/11 08:01 AM, Ian Collins wrote:
On 11/11/11 02:39 AM, Mike Gerdts wrote:
On Thu 10 Nov 2011 at 08:32PM, Ian Collins wrote:
On 10/10/11 07:20 PM, Edward Pilatowicz wrote:
by default packages that get installed into a zone are specified in the
default AI manifest used to install zones
On 11/11/11 09:20 AM, Mike Gerdts wrote:
On Fri 11 Nov 2011 at 08:41AM, Ian Collins wrote:
Solaris 11 Express with the latest updates from the support repo.
I'm getting an odd problem creating zones and I wanted to check the
package list:
Package State Update Phase 45/45
On 11/10/11 02:40 PM, John D Groenveld wrote:
In message4ebb2534.80...@ianshome.com, Ian Collins writes:
I have removed all reference to them in the global zone:
# pkg publisher
PUBLISHER TYPE STATUS URI
solaris origin online
On 11/10/11 03:07 PM, Edward Pilatowicz wrote:
you should safely be able to delete that publisher from the zones. (in
s11, zones inherit publishers from the global zone so they don't
actually need any local publisher configuration.)
How would I do that form outside of the zone?
--
Ian.
On 10/10/11 07:20 PM, Edward Pilatowicz wrote:
On Fri, Oct 07, 2011 at 12:23:30PM -0700, Michael Speer wrote:
All,
I have two questions based on what I have been seeing where I don't see
packages of interest being
installed into a zone I create when the package exists in the global zone.
1)
On 11/10/11 08:32 PM, Ian Collins wrote:
On 10/10/11 07:20 PM, Edward Pilatowicz wrote:
On Fri, Oct 07, 2011 at 12:23:30PM -0700, Michael Speer wrote:
All,
I have two questions based on what I have been seeing where I don't see
packages of interest being
installed into a zone I create when
This is an odd one!
I have an exclusive IP zone I want to reconfigure (full up to date
Solaris 11 Express). sys-unconfig runs though OK, but on reboot the old
hostname reappears and the configure screens start at the system part of
a subnet screen.
Removing /etc/inet/hosts.saved form the
On 10/12/11 09:38 AM, Maidak Alexander J wrote:
I took a native zone from Solaris 10 and attempted to v2v migrate it to a
Solaris 10 branded zone on Solaris 11 Express 151.0.1.8.
I just detached the zone from Solaris 10 and did a zfs send|zfs recv for the
zonepath dataset
Before I go through the pain of logging a support call, has anyone
seen or fixed the following problem:
I ran an update on a fresh Solaris 11 Express system from the support
repository and after restarting, all the systems zones are dead. The
zone consoles report:
SunOS Release 5.11
On 09/30/11 09:45 AM, Nico Williams wrote:
On Thu, Sep 29, 2011 at 3:28 PM, Jeff Victorjeff.j.vic...@gmail.com wrote:
The general rule is convince product management that there is a business
reason to invest the engineer(s) and it will get done.
IMO, for backports, the bar should be much
On 09/29/11 09:50 AM, Edward Pilatowicz wrote:
nfs server is now supported in a zone on s11.
smb server is not.
OK, thanks Ed.
I thought the original ARC case for PRIV_SYS_SHARE would have enabled both?
--
Ian.
___
zones-discuss mailing list
Has the restriction on sharing ZFS filesystems vis nfs or smb from a
zone been removed in the Solaris 11 branch yet?
If not, will it be?
Thanks.
--
Ian.
___
zones-discuss mailing list
zones-discuss@opensolaris.org
I just tried adding a new zone to an 11 Express system with a number
of existing zones I I got the following failure:
zoneadm -z ares install
A ZFS file system has been created for this zone.
Certificate '/var/pkg/ssl/OpenSolaris_extras.certificate.pem' has
expired. Please install a valid
On 05/ 5/11 11:36 AM, Ian Collins wrote:
I just tried adding a new zone to an 11 Express system with a number
of existing zones I I got the following failure:
zoneadm -z ares install
A ZFS file system has been created for this zone.
ERROR: Unable to create the zone's ZFS dataset.
It turns
On 02/20/11 09:21 AM, Sanjay Akula wrote:
Installed latest Solaris 10 Recommended cluster patch, after applying
the Recommended cluster patch system was rebooted -- -r and after
system boot into multi user mode the new kernel patch did not loaded
Generic_144488-06.
The output of verbose
On 12/23/10 12:41 AM, gerard henry wrote:
hello all,
i have a sun x4150 with 4 zones (b111). I want to upgrade to b134,
before upgrading to S11express.
The process fails. As a workourand, i'm trying to move zones on
another server in b134. So i'm tryng to follow the official document
found
On 12/ 8/10 05:48 PM, Taylor, Matthew wrote:
Thank you sir. I had forgotten, overlooked, or other wise failed to try doing
a -F to force the attachment. I tried that and it shows as installed, then was
able to boot it.
Before that I got these errors:
zoneadm -z myzone attach
These
On 12/ 8/10 05:03 PM, Taylor, Matthew wrote:
I have three V245 servers with identical architecture, running latest Solaris
10.
I have configured a whole root zone using shared IP on one of the servers. I
was able to easily clone a second copy of the zone on the first server. I have
On 12/ 4/10 02:42 PM, Fabian R. Breschi wrote:
Hello,
I have installed SUNWsmba on a non-global zone as well as in the global zone
The global zone is okay, while the non-global zone it doesn't looks like to
reply correctly to incoming connections.
Has anybody had this type of problem? maybe
On 12/ 6/10 03:14 AM, Fabian R. Breschi wrote:
On 12/ 4/10 02:42 PM, Fabian R. Breschi wrote:
Hello,
I have installed SUNWsmba on a non-global zone as
well as in the global zone
The global zone is okay, while the non-global zone
it doesn't looks like to reply correctly to incoming
On 11/25/10 11:08 PM, Petr Benes wrote:
I bet VBox can't run inside the local zone.
See the rest of this thread!
--
Ian.
___
zones-discuss mailing list
zones-discuss@opensolaris.org
On 11/19/10 03:40 AM, John D Groenveld wrote:
In message4ce45077.3080...@ianshome.com, Ian Collins writes:
zone 'test': WARNING: unable to add network interface 'rge0': link busy
zone 'test': failed to add network device: Device busy
Any ideas?
Shot in the dark, does NWAM have
I run through the upgrade process on a system with half a dozen zones
and on restart, they all get locked into a core dump/restart loop:
Nov 19 07:57:50 i7 genunix: [ID 729207 kern.warning] WARNING: init(1M)
for zone webhost (pid 3094) core dumped on signal 12: restarting
automatically
They
On 11/19/10 08:26 AM, John D Groenveld wrote:
In message4ce57afe.9070...@ianshome.com, Ian Collins writes:
I run through the upgrade process on a system with half a dozen zones
and on restart, they all get locked into a core dump/restart loop:
Nov 19 07:57:50 i7 genunix: [ID 729207
changed. 12 is SIGSYS.
-Steve
On 11/18/10 11:14 AM, Ian Collins wrote:
I run through the upgrade process on a system with half a dozen zones
and on restart, they all get locked into a core dump/restart loop:
Nov 19 07:57:50 i7 genunix: [ID 729207 kern.warning] WARNING:
init(1M) for zone
On 11/19/10 10:11 AM, Steve Lawrence wrote:
On 11/18/10 12:38 PM, Ian Collins wrote:
On 11/19/10 09:12 AM, Steve Lawrence wrote:
What build are you upgrading from?
134 through 134b as recommended in the release notes.
Is this during the attach -u portion of the upgrade for each zone
Hello,
I'm trying to create a physical IP zone but I can't remove the interface
from the global zone.
During install I got the following warning:
WARNING: skipping network interface 'rge0' which is used in the global zone.
So I unplumbed the interface:
ifconfig rge0 inet unplumb
ifconfig
On 11/ 3/10 02:21 PM, Henrik Johansson wrote:
On Nov 3, 2010, at 1:22 AM, Ian Collins wrote:
On Nov 3, 2010, at 12:06 AM, Ian Collins wrote:
On 11/ 3/10 11:56 AM, Henrik Johansson wrote:
I would ideally like to do two things:
1. Have all filesystem configuration for the zone in the pool
On 10/25/10 09:36 AM, Anil wrote:
On 10/24/10 01:20 PM, Ian Collins wrote:
On 10/25/10 09:06 AM, Anil wrote:
I know we can do detach/attach to migrate zones, but is there
another way (even a hack)?
I am concerned about using zones, and if the global zone dies, I
want to be able to move
On 10/ 1/10 09:42 AM, Orvar Korvar wrote:
Ok, now I am confused.
I want to shut down all internet connection to my global zone. I dont want to
shut down the global zone, only the internet connection. I want to reach
internet only from local zones. Some of the local zones will have a server
On 10/ 1/10 10:33 AM, Glenn Faden wrote:
VBox definitely works in zones. It installs a global zone SMF service,
VBoxService, to take care of loading the kernel modules since this
can't be done by a NGZ.
see http://www.virtualbox.org/changeset/24240
Ah, so I was correct is stating VirtualBox
On 08/26/10 06:32 AM, Mike DeMarco wrote:
Is it possible to add a new zfs filesystem to a zone without rebooting the zone?
I have a need to add a filesystem to a zone for a couple of weeks but can not
take an outage of the zone.
Does it already have a filesystem? If so, can't you create a
On 08/26/10 08:33 AM, Robert Hartzell wrote:
On 08/25/10 01:19 PM, Ian Collins wrote:
Please post the config for the zone.
?xml version=1.0 encoding=UTF-8?
!DOCTYPE zone PUBLIC -//Sun Microsystems Inc//DTD Zones//EN
file:///usr/share/lib/xml/dtd/zonecfg.dtd.1
!--
DO NOT EDIT THIS FILE
On 08/26/10 10:16 AM, Robert Hartzell wrote:
Ok I was able to change the zoned property and mount to another
location. I was able to recover the database... but still couldn't
attach the zone.
Now I can get back to working on getting the disk to boot again.
Thanks for all the help.
No
On 08/19/10 05:56 AM, Robert Hartzell wrote:
On 08/17/10 03:28 PM, Ian Collins wrote:
On 08/18/10 09:18 AM, Robert Hartzell wrote:
I have 2 zones on a disk that I have mounted from a dead system.
bertha/zones 6.86G 126G 24K /mnt/export/zones
bertha/zones/bz1 6.05G 126G 24K /mnt/export/zones
On 08/18/10 09:18 AM, Robert Hartzell wrote:
I have 2 zones on a disk that I have mounted from a dead system.
bertha/zones 6.86G 126G24K
/mnt/export/zones
bertha/zones/bz1 6.05G 126G24K
/mnt/export/zones/bz1
bertha/zones/bz1/ROOT
On 08/ 6/10 12:40 AM, Frank Batschulat (Home) wrote:
On Thu, 05 Aug 2010 14:03:20 +0200, Richard L. Hamiltonrlha...@smart.net
wrote:
I would like to upgrade a Thumper we use as a staging
server for backups form Solaris 10 to OpenSolaris. The backup
application (NetVault) is only
On 08/ 6/10 01:43 AM, Prasoon Bansal wrote:
Hello Benr,
I had read all the reply of your query posted on this blog.
Which blog? Your post appears to be an orphan.
I have the same matching query with the others. As i had configured the
non-global zone on nfs shared folder(nfsserver) and
hello,
I would like to upgrade a Thumper we use as a staging server for backups
form Solaris 10 to OpenSolaris. The backup application (NetVault) is
only supported on Solaris.
So my question is: can a branded Solaris 10 zone access the external
tape vault? If so are there likely to be any
Hello,
This may not be specific to a PDC, but I have have managed to get Samba
running in a non-global zone by adding the sys_smb privilege to the
zone's config, but none of the exported shares are visible to windows
machines.
--
Ian.
___
On 05/29/10 10:16 AM, Ian Collins wrote:
All the zones fail to bot with the same error
r...@i7:~# zoneadm -z ldap boot
zone 'ldap': ERROR: no active dataset.
zone 'ldap':
zoneadm: zone 'ldap': call to zoneadmd failed
Another data point:
I just tried creating another zone, with the following
I've tracked down the cause. It was my backup copy of the zone ZFS tree
on another pool:
backup/zoneRoot 1.64G 89.3G26K /backup/zoneRoot
backup/zoneRoot/svn 439M 89.3G24K
/backup/zoneRoot/svn
backup/zoneRoot/svn/ROOT 439M 89.3G
On 05/29/10 12:25 AM, Jerry Jelinek wrote:
On 05/26/10 17:14, Ian Collins wrote:
I have just restarted a b133 host with several zones and no none of them
will boot. They all report:
# zoneadm -z svn boot
zone 'svn': ERROR: no active dataset.
zone 'svn':
zoneadm: zone 'svn': call to zoneadmd
On 05/29/10 09:51 AM, Jerry Jelinek wrote:
On 05/28/10 15:16, Ian Collins wrote:
What does 'zfs list' show?
rpool 46.3G 542G 81.5K /rpool
rpool/ROOT 5.98G 542G 21K legacy
rpool/ROOT/opensolaris 5.98G 542G 5.93G /
rpool/build 438M 542G 424M /build
rpool/depot 42K 542G 24K /depot
rpool/dump
On 05/27/10 11:14 AM, Ian Collins wrote:
I have just restarted a b133 host with several zones and no none of
them will boot. They all report:
# zoneadm -z svn boot
zone 'svn': ERROR: no active dataset.
zone 'svn':
zoneadm: zone 'svn': call to zoneadmd failed
I've seen this mentioned
I have just restarted a b133 host with several zones and no none of them
will boot. They all report:
# zoneadm -z svn boot
zone 'svn': ERROR: no active dataset.
zone 'svn':
zoneadm: zone 'svn': call to zoneadmd failed
I've seen this mentioned as an issue after an upgrade, but this system
So what is the error?
Casper,
I posted the lucreate error and the extract from a debug run up thread.
The system I was attempting to upgrade was a fresh install of update 7.
lucreate/delete worked fine before installing the update 8 LU packages.
Ian.
--
This message posted from
I see a similar error attempting to create a BE in update 7 with one zone
(common) after adding the update 8 LU packages:
Creating clone for rpool/ROOT/10u7ZFSa/zoneRoot/com...@10u8 on
rpool/ROOT/10u8/zoneRoot/common-10u8.
cannot mount 'rpool/ROOT/10u8/zoneRoot/common-10u8': legacy mountpoint
70 matches
Mail list logo