RE: FrameMaker 9 "Internal error 9004" issue

Frank Ripp said: ? Maybe it is time - if I upgrade, should it be to Frame 12 or "Frame 2015"? Hmmm ... probably worth just going to FrameMaker 2015 in your case, I would think? The cost for either upgrade (well ... not an upgrade really, since it is a new purchase cost!) would be the same for

Re: FrameMaker 9 "Internal error 9004" issue

Since getting the current release would cost $1000, you might consider migrating to Flare instead. Not that I'm a huge fan of Flare, but it won't cost you anything to evaluate. On Mon, Jun 15, 2015 at 9:47 AM, Frank Ripp wrote: > I noticed that my problem started several days after a series of IT

RE: FrameMaker 9 "Internal error 9004" issue

Hi Framers, Based on your feedback, I tried the following: 1) Setting the compatibility mode to "Windows XP (Service Pack 3)", "Vista (Service Pack 2)", and even "Windows 7". 2) Opening Frame as an Administrator. Neither of these made a difference. I noticed that my problem started

Re: FrameMaker 9 "Internal error 9004" issue

If it needs "Run as Administrator," you might need to modify the shortcut that starts the application. I have one application I had to do that for in Windows 7 64-bit. On Sat, Jun 13, 2015 at 12:04 PM, Wim Hooghwinkel - iDTP wrote: > Did you try to open frame as administrator - maybe only once is

Re: FrameMaker 9 "Internal error 9004" issue

Did you try to open frame as administrator - maybe only once is enough. I think you need local administrator rights to work with FM. Also check your local user folder. That must be accessible and writable. Kind regards, Wim Hooghwinkel ___ You are

RE: FrameMaker 9 "Internal error 9004" issue

obert Lauriston Sent: Friday, June 12, 2015 2:45 PM To: Frank Ripp; framers@lists.frameusers.com Subject: Re: FrameMaker 9 "Internal error 9004" issue 64-bit Windows 7 is not a supported OS for FrameMaker 9, it's designed for 32-bit XP or Vista. Have you tried installing in compati

Re: FrameMaker 9 "Internal error 9004" issue

64-bit Windows 7 is not a supported OS for FrameMaker 9, it's designed for 32-bit XP or Vista. Have you tried installing in compatibility mode? Here's an old Adobe forum thread on the subject: https://forums.adobe.com/message/2992588 On Fri, Jun 12, 2015 at 2:34 PM, Frank Ripp wrote: > Hi Frame

Re: FrameMaker 9 on Windows 7 Ultimate

> From: framers-boun...@lists.frameusers.com [mailto: > framers-boun...@lists.frameusers.com] On Behalf Of Craig, Alison > Sent: Friday, June 06, 2014 11:27 AM > To: Robert Lauriston; M Lee; framers@lists.frameusers.com > Subject: RE: FrameMaker 9 on Windows 7 Ultimate > >

RE: FrameMaker 9 on Windows 7 Ultimate

- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Robert Lauriston Sent: Thursday, June 05, 2014 11:00 AM To: M Lee; framers@lists.frameusers.com Subject: Re: FrameMaker 9 on Windows 7 Ultimate Lots of people have reported problems running FM9

RE: FrameMaker 9 on Windows 7 Ultimate

amers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Robert Lauriston Sent: Thursday, June 05, 2014 11:00 AM To: M Lee; framers@lists.frameusers.com Subject: Re: FrameMaker 9 on Windows 7 Ultimate Lots of people have reported problems running FM9 on 64-bit Windows

Re: FrameMaker 9 on Windows 7 Ultimate

Lots of people have reported problems running FM9 on 64-bit Windows 7. Can you upgrade to FM12? On Thu, Jun 5, 2014 at 10:33 AM, M Lee wrote: > Hi Robert, > > Tech support at FrameScript did not recommend that I run in XP compatibility > mode and recommended that I contact Adobe. I tried to submi

Re: FrameMaker 9 on Windows 7 Ultimate

Contact FrameScript support for help. On Thu, Jun 5, 2014 at 7:19 AM, M Lee wrote: > Hi Matt, > > Unfortunately, it's not limited to a particular doc. And I forgot to add > that if I switch FrameMaker 9 to run in XP compatibility mode, the crashes > go away. But then my FrameScript add-on acts as

RE: FrameMaker 9 on Windows 7 Ultimate

. Z From: M Lee [mailto:marthale...@gmail.com] Sent: Thursday, June 05, 2014 11:11 AM To: Syed Zaeem Hosain (syed.hos...@aeris.net) Cc: framers@lists.frameusers.com Subject: Re: FrameMaker 9 on Windows 7 Ultimate Hi Syed, All the files I'm trying to open are local. What's annoying i

Re: FrameMaker 9 on Windows 7 Ultimate

Hi Syed, All the files I'm trying to open are local. What's annoying is that the machine I had before was a Windows 7 machine, 64-bit Home Edition, with no problems. When I got this "upgrade", I started to have problems with FrameMaker. Thanks. Martha On Thu, Jun 5, 2014 at 1:47 PM, Syed Zaeem

RE: FrameMaker 9 on Windows 7 Ultimate

I ran FrameMaker – forget which version though, but was probably FM 8 – on a Alienware 17” M7700 system some years ago with Windows 7 Ultimate without any problems. Fast machine at that time for sure! So, I would be surprised if the hardware is in any way an issue. Are the files you are trying

Re: FrameMaker 9 on Windows 7 Ultimate

Hi Robert, Tech support at FrameScript did not recommend that I run in XP compatibility mode and recommended that I contact Adobe. I tried to submit my problem to the FrameMaker forum this morning but kept getting errors when I tried to submit my question. Martha On Thu, Jun 5, 2014 at 1:03 PM,

Re: FrameMaker 9 on Windows 7 Ultimate

Hi Matt, Unfortunately, it's not limited to a particular doc. And I forgot to add that if I switch FrameMaker 9 to run in XP compatibility mode, the crashes go away. But then my FrameScript add-on acts as if it is unlicensed. Martha On Thu, Jun 5, 2014 at 10:17 AM, Matt Sullivan wrote: > Soun

RE: FrameMaker 9: Table Alighment

Hi Brenda, Instead of a table with many rows, you could also use a table with just a single cell. Move all your text inside this table. The paragraph format should have "Cell Vertical Alignment" set to Bottom. Then set a tab stop so that you can left align your values. Or do not use any tabs, e.g.

Re: FrameMaker 9: Table Alighment

Apparently it's not as easy as I thought. According to the link below, there is no such thing as vertical alignment for text within a text frame, only within a table cell. http://lists.frameusers.com/pipermail/framers/2007-December/010290.html What you cou

RE: FrameMaker 9: Table Alighment

Hi Brenda, Not automatically. A good way to do it by hand is to put an anchored frame above the table. After you show/hide your conditions, then you can stretch or shrink the anchored frame to line up the table at the bottom. If you have FrameScript, I can provide a script that would do the adj

Re: FrameMaker 9: Table Alighment

I think what you need to do is have the text in the frame aligned with the bottom of the frame instead of the top as it usually is. I'm not sure how to do that, but I'm sure there is a way. Regards, Shmuel Wolfson Technical Writer 052-763-7133 On 17-Dec-13

Re: FrameMaker 9 Find not Finding

Have yiu exported to .mif and looked at the string it's not finding? On Mon, Mar 19, 2012 at 5:55 AM, wrote: > Carol knows my pain. > > Thanks for the suggestions, but > one flow. > no text frames. > no text insets. > no conditional text > not looking for non breaking spaces > not looking in var

RE: FrameMaker 9 Find not Finding

...@lists.frameusers.com] On Behalf Of wendy_le...@goodyear.com Sent: Monday, March 19, 2012 7:55 AM To: celk...@awrittenword.com Cc: framers@lists.frameusers.com; framers-boun...@lists.frameusers.com Subject: Re: FrameMaker 9 Find not Finding Carol knows my pain. Thanks for the suggestions, but one flow. no text

Re: FrameMaker 9 Find not Finding

M Subject: Re: FrameMaker 9 Find not Finding Sent by:framers-boun...@lists.frameusers.com I'm running Frame 9 on Win7 and have experienced a lot of unreliability in Frame's Find function. I don't use conditional text or text insets, and the text I'm trying

Re: FrameMaker 9 Find not Finding

I'm running Frame 9 on Win7 and have experienced a lot of unreliability in Frame's Find function. I don't use conditional text or text insets, and the text I'm trying to find is not a variable or specially formatted. Frame is just blind to it sometimes. I can position the cursor immediately bef

Re: FrameMaker 9 Find not Finding

FrameMaker's find function won't find text within a variable, inside a text inset, or conditionalized text that is hidden. It also won't find, for example, text containing a non-breaking space, if you search for a regular space. Here's a link that might help you: http://blogs.adobe.com/tcs/2011

Re: FrameMaker 9 keyboard weirdness

-- > > Message: 2 > Date: Mon, 3 Oct 2011 12:40:21 -0500 > From: "Kelley, Lea Shannon" > To: > Subject: Re: FrameMaker 9 keyboard weirdness > Message-ID: > > Content-Type: text/plain; charset="us-ascii" > > Ga

Re: FrameMaker 9 keyboard weirdness

; To: Subject: Re: FrameMaker 9 keyboard weirdness Message-ID: Content-Type: text/plain; charset="us-ascii" Gay wrote: How do I change the maker.ini so Ctrl-V will paste text from Word? Lea Shannon Kelley Technical Publications Department ThyssenKrupp Elevator Amer

Re: FrameMaker 9 keyboard weirdness

Gay wrote: I've been on Windows 7 for awhile now; only thing I've changed recently >is to edit maker.ini so Ctrl-V will paste text from Word instead of >having it come in as OLE. My co-workers who did the same thing haven't >had this substitution and none of my other keys have been remapp

Re: FrameMaker 9 keyboard weirdness

ve, Suite 200 London, Ontario N5V 3S4 Tel. 519 691-0919 ext. 330 _ From: Shlomo Perets [mailto:shlo...@microtype.com] To: Gay Alson [mailto:gal...@epicor.com] Cc: framers@lists.frameusers.com Sent: Mon, 03 Oct 2011 08:04:58 -0400 Subject: Re: FrameMaker 9 keyboard weirdness Gay, You

Re: FrameMaker 9 keyboard weirdness

Gay, You wrote: What on earth have I done? Suddenly single or double quotes in FrameMaker 9 (fully patched) display as question marks. (Only in Frame, not Outlook, Notepad, or Word.) I've been on Windows 7 for awhile now; only thing I've changed recently is to edit maker.ini so Ctrl-V will pa

(SOLVED) RE: FrameMaker 9 keyboard weirdness

Sorry if I needlessly took anyone's time -- a co-worker just compared my maker.ini file to his and discovered that I had inadvertently introduced some corruption when I edited it yesterday. I substituted his .ini for mine and all is well again. Thanks! ~~Gay ---

(SOLVED) RE: FrameMaker 9 keyboard weirdness

Sorry if I needlessly took anyone's time -- a co-worker just compared my maker.ini file to his and discovered that I had inadvertently introduced some corruption when I edited it yesterday. I substituted his .ini for mine and all is well again. Thanks! ~~Gay ---

RE: FrameMaker 9 - Deactivate Greyed Out

A search of the Adobe Forums leads me to believe that the Deactivate option is disabled if you are running a volume license. In that case, just uninstall. From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Robert

Re: FrameMaker 9/10 Toolbars

Hi,   As far as I know, Shlomo's ToolbarPlus Express for FM9/10 includes keyboard, menu, and context menus customizations, From: Mike Wickham To: framers@lists.frameusers.com Sent: Monday, August 15, 2011 11:04 PM Subject: Re: FrameMaker 9/10 Toolbars RE: Microtype ToolbarPlus Expre

Re: FrameMaker 9/10 Toolbars

On 15 Aug 2011 at 14:53, Rick Quatro wrote: > Is there any good information on making custom toolbars in FrameMaker 9 > and 10? I basically figured out how to make a custom toolbar and have it > show in the View > Toolbars menu, but I am trying to find out if you can > add custom commands to the t

Re: FrameMaker 9/10 Toolbars

RE: Microtype ToolbarPlus Express I forgot to mention that, even though the site says the plugin is good for up to FM 8, Shlomo had sent me an FM9 version way back when, so I assume that's the one he would actually send, and that the web page is out of date. Here's a link to the page: http:/

Re: FrameMaker 9/10 Toolbars

> I would like to have a command that would show/hide text symbols and borders at the same time. The ToolbarPlus Express plugin from Microtype adds Printing View and Editing View menu items, which do exactly that. Very handy. Mike Wickham ___ You

Re: FrameMaker 9 and 4-color printing

I don't know of any specific gotchas but I would review the color prep documentation carefully before proceeding. http://help.adobe.com/en_US/FrameMaker/9.0/Using/WS3A713448-91C0-44bc-ABE0-C2849D7021D6.html On Thu, Jun 23, 2011 at 10:18 AM, Rick Quatro wrote: > Hello Framers, > > I have a client

RE: FrameMaker 9 Crashing

I get this crash occasionally as well (FM9 all patched, W7 Ultimate, 6 Gb RAM) It comes and goes with no discernable pattern. Usually it goes away after a few crashes and FM9 restarts. I haven't dealt with it as I am currently trying to track down other, more urgent system issues. - and keep up

RE: FrameMaker 9 Crashing

With a 64 bit Win7 system, I'd be looking at adding more RAM to start with. 4GB is pretty small on a Win7 system. Secondly, I'd be sending the crash logs to Adobe and talking with Support. They might have some suggestions. From: framers-boun...@lists.frameusers.c

RE: Framemaker 9 master pages - reversed pagination

Les Smalley wrote: > It's not random or arbitrary - the default order is so that if you look > at a facing page view of the master pages in a double-sided document > you can see the typical layout of the assembled book/document. [slaps forehead] Of course! Thanks, Les! Richard G. Combs Senior T

RE: Framemaker 9 master pages - reversed pagination

It's not random or arbitrary - the default order is so that if you look at a facing page view of the master pages in a double-sided document you can see the typical layout of the assembled book/document. — Les --- On Thu, 6/2/11, Combs, Richard wrote: .. Not sure what you mean b

RE: Framemaker 9 master pages - reversed pagination

Maybe I am grasping for the most simple explanation, but try: Format > Page Layout > Pagination. Once in that dialog box, Look at the "1st Page Side" drop-down box. It should say Right, but if not, set it to that. - Bill Occam From: Smith, Andy [mailto:andy.sm...@veoliawater.com] Sent: Tuesday

RE: Framemaker 9 master pages - reversed pagination

Smith, Andy wrote: > I have a problem with the master pages in my document, for some reason > the pagination seems to be back to front. Not sure what you mean. There's no "pagination" of master pages. They're just templates, and their order is of no consequence. > I've got two master pages f

Re: FrameMaker 9 (Paragraph Designer bug)

Hello, I would just like to second what Alison and Nadine said about the FM9 bug being related to setting tabs and add this: I have discovered that you can set tabs on the ruler without killing the paragraph designer IF the paragraph designer is closed/collapsed when you do it. I set/move t

Re: FrameMaker 9

...@voith.com] *Sent:* Friday, May 20, 2011 6:49 AM *To:* Fred Ridder; Karen Mann; framers@lists.frameusers.com *Subject:* RE: FrameMaker 9 And I didn't mean to overstate my response, Fred. I do appreciate what you bring to us here. I'm usually keeping a close eye on the list and try

Re: FrameMaker 9

te: > > > From: Karen Mann > Subject: RE: FrameMaker 9 > To: "Pinkham, Jim" , "Fred Ridder" < > docu...@hotmail.com>, "framers@lists.frameusers.com" < > framers@lists.frameusers.com> > Date: Friday, May 20, 2011, 9:44 AM > > Thank

RE: FrameMaker 9

> > I believe it's fixed in FM10 > But users should NOT have to pay $400 (FM) or $700 (TCS) in upgrade fees in > order to have a functional product. If the problem doesn't occur in FM10, > then Adobe obviously knows how to fix it. Karen is right; Adobe should patch > their broken software. Ex

Re: FrameMaker 9

*From:* framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] *On Behalf Of *Karen Mann *Sent:* Friday, May 20, 2011 9:44 AM *Subject:* RE: FrameMaker 9 Thank you, for your attention. It appears others have this same issue with the paragraph designer etc. I have

RE: FrameMaker 9

There was a discussion quite a while back about the Paragraph Designer freezing if you adjusted the tabs on the ruler, rather than within the Paragraph Designer. Could that be a part of your problem? Nadine --- On Fri, 5/20/11, Karen Mann wrote: From: Karen Mann Subject: RE: FrameMaker 9 To

RE: FrameMaker 9

I believe it's fixed in FM10 From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Karen Mann Sent: Friday, May 20, 2011 9:44 AM To: Pinkham, Jim; Fred Ridder; framers@lists.frameusers.com Subject: RE: FrameMa

RE: FrameMaker 9

your time and response, I really appreciate this forum. Karen Mann km...@i-t-tech.com From: Pinkham, Jim [mailto:jim.pink...@voith.com] Sent: Friday, May 20, 2011 6:49 AM To: Fred Ridder; Karen Mann; framers@lists.frameusers.com Subject: RE: FrameMaker 9 And I didn't mean to overstate my respo

Re: FrameMaker 9

> > >     - Dov > > > > > > > > From: framers-boun...@lists.frameusers.com > [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Fred Ridder > Sent: Thursday, May 19, 2011 6:13 PM > To: jim.pink...@voith.com; km...@i-t-tech.com; framers@l

Re: FrameMaker 9

Yes, I see the same problem with my paragraph designer. I'm FM9 fully patched, on a brand new Dell Workstation running Win7 Pro SP1 32-bit with 4GB Memory, Xeon 2.53 GHz processor, graphics card is a NVIDIA Quadro 4000 (2 GB). After awhile, my paragraph designer will simply stop working. I h

RE: FrameMaker 9

d then :) Jim From: Fred Ridder [mailto:docu...@hotmail.com] Sent: Thursday, May 19, 2011 11:50 PM To: Pinkham, Jim; km...@i-t-tech.com; framers@lists.frameusers.com Subject: RE: FrameMaker 9 I didn't mean to chase you back to lurkdom, Jim. Really! I was just trying to keep things reasonabl

RE: FrameMaker 9

I didn't mean to chase you back to lurkdom, Jim. Really! I was just trying to keep things reasonably on-point. -Fred Subject: RE: FrameMaker 9 Date: Thu, 19 May 2011 21:19:37 -0500 From: jim.pink...@voith.com To: docu...@hotmail.com; km...@i-t-tech.com; framers@lists.frameuser

RE: FrameMaker 9

ehalf Of Fred Ridder Sent: Thursday, May 19, 2011 6:13 PM To: jim.pink...@voith.com; km...@i-t-tech.com; framers@lists.frameusers.com Subject: RE: FrameMaker 9 I'm afraid it may not be worth very much as a data point, because there is a world of difference between Windows XP and any 64-bit

RE: FrameMaker 9

red Ridder [mailto:docu...@hotmail.com] Sent: Thursday, May 19, 2011 8:13 PM To: Pinkham, Jim; km...@i-t-tech.com; framers@lists.frameusers.com Subject: RE: FrameMaker 9 I'm afraid it may not be worth very much as a data point, because there is a world of difference between Windows XP and any

RE: FrameMaker 9

lty and/or stability issues with a lot of apps. Subject: RE: FrameMaker 9 Date: Thu, 19 May 2011 19:53:02 -0500 From: jim.pink...@voith.com To: km...@i-t-tech.com; framers@lists.frameusers.com FWIW, I've been using FM 9 with these specs at work since December, and I've never run in

RE: FrameMaker 9

FWIW, I've been using FM 9 with these specs at work since December, and I've never run into the bug you're experiencing: Dell Precision T3400 Win XP SP 3 80GB HD 2.67 gigahertz Intel Core2 Duo 64 kilobyte primary memory cache 4096 kilobyte secondary memory cache (3.3 GB usable installed memory) 6

RE: FrameMaker 9

: Karen Mann Cc: framers@lists.frameusers.com Subject: Re: FrameMaker 9 Do you have any plug-ins in FM? What kind of virus checker are you using? This does not appear as a standard FM bug, so I would suspect something else is causing a memory leak. Alan On 20/05/2011, at 9:59 AM, Karen Mann

Re: FrameMaker 9

Do you have any plug-ins in FM? What kind of virus checker are you using? This does not appear as a standard FM bug, so I would suspect something else is causing a memory leak. Alan On 20/05/2011, at 9:59 AM, Karen Mann wrote: Has anyone else had this issue? I have a new Dell, 64 bit,

RE: Framemaker 9 Index

...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Jeff Coatsworth Sent: Wednesday, March 09, 2011 9:29 AM To: framers@lists.frameusers.com Subject: RE: Framemaker 9 Index If you're indexing a number of .fm docs within a book, check that the pagination is set so

RE: Framemaker 9 Index

If you're indexing a number of .fm docs within a book, check that the pagination is set so that it flows properly from beginning to end - this looks like it's picking up index marker hits in multiple .fm docs that have different pagination rules applied. So within that doc it makes sense, but on

Re: FrameMaker 9 crashing in Windows 7

Hi Karen, If I understand your situation correctly, I've had those problems myself. I found if I set a tab using the ruler instead of opening the paragraph designer and setting it there, this created a problem with the paragraph designer not letting me move through the pages. And that behaviour al

RE: FrameMaker 9 Reviewers CD

-Oorspronkelijk bericht- Van: Shlomo Perets [mailto:shlo...@microtype.com] Verzonden: dinsdag 24 augustus 2010 20:42 Aan: Wim Hooghwinkel - idtp CC: framers@lists.frameusers.com Onderwerp: Re: FrameMaker 9 Reviewers CD Wim, You wrote: >Does anybody know how or where to get the FrameMa

Re: FrameMaker 9 Reviewers CD

Wim, You wrote: Does anybody know how or where to get the FrameMaker 9 reviewers CD - or the sample files mentioned in the Framemaker 9 Reviewers Guide (http://www.adobe.com/devnet/framemaker/pdfs/fm9_reviewers_guide.pdf) ? The zip file with SWF demos and practice exercises is available at:

Re: FrameMaker 9 Paragraph Designer Problem

As I recall, it happens if you adjust tags on the rule *and *have the Paragraph Designer set to showing anything other than the Basic properties. Philip On Thu, Aug 12, 2010 at 9:15 AM, Writer wrote: > This was discussed before, but I can't find the thread. The upshot was that > if you have t

Re: FrameMaker 9 Paragraph Designer Problem

Rats! I thought it might be fixed with that patch because I tried getting the PD db to freeze, and it didn't. I guess it only freezes if you're doing serious work. =D Nadine --- On Thu, 8/12/10, Art Campbell wrote: > From: Art Campbell > Subject: Re: FrameMaker 9 Paragraph

Re: FrameMaker 9 Paragraph Designer Problem

Nope; still present in 255. Art Campbell               art.campb...@gmail.com   "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson                                                       No disclaimers apply.                            

Re: FrameMaker 9 Paragraph Designer Problem

This was discussed before, but I can't find the thread. The upshot was that if you have the Paragraph Designer open, but you adjust the tabs on the ruler, rather than within the Paragraph Designer, it would cause the PD to freeze. In addition, you might want to apply the newest patch (255) to FM

Re: FrameMaker 9 Paragraph Designer Problem

First thing I'd try is installing the patches you're missing. Current release level is p255 Although, having said that, mine occasionally dies too. Usually after I toggle auto-collapse pods on or off, or run through a bunch of changes in the designer. I usually reboot and that clears the pro

RE: FrameMaker 9 User Interface Video

I just watched this video -- thanks for the reference. I'll say a couple of things: 1) I like some of the new features, especially the Insets browser. This is good stuff. 2) It's also good that some of the previously modal dialogs are modeless. 3) I still maintain that the notion of working w

Re: FrameMaker 9 Crashes

If that works fine. When I had the problem several months ago I was desperate to find any solution that worked for me (Adobe Support having no idea at that time and it being made more difficult by having a corporate license where only the first person registered showed up as "supported"). Ray Ra

RE: FrameMaker 9 Crashes

Hi Ray, I would not delete the whole tree, just the Linguists folder. Here is the message I got from someone at Adobe: Hi Rick, It seems that the linguistic folder got corrupted. Pls. delete/rename %Appdata%\Adobe\Linguist folder and then launch FrameMaker. Regards, Megha Rick Quatro Carmen Pu

RE: FrameMaker 9 User Interface Video

Mike, thanks for reaching out to me, and for posting the new link on my blog to the FrameMaker 9 UI video. I really appreciate it! ___ Sincerely, RJ Jacquez Adobe Senior Product Evangelist Follow me on Twitter http://twitter.com/rjacquez/ NEW Blog: http://rjacquez.com --

RE: Framemaker 9 vs Microsoft Word

Hi Tim, As Fred pointed out, there are tons of things you can do with FrameScript or the FDK. I am partial to FrameScript because I make my living writing them, but you can really make FrameMaker fly with FrameScript automation. Rick Quatro Carmen Publishing Inc. 585-659-8267 r...@frameexpert.com

RE: Framemaker 9 vs Microsoft Word

Johnson > Sent: Tuesday, June 01, 2010 10:01 AM > To: Kelly McDaniel > Cc: framers@lists.frameusers.com > Subject: Re: Framemaker 9 vs Microsoft Word > > ... and lest I forget, numbered lists are a NIGHTMARE in Word, > effortless in Frame. > > On Tue, Jun 1, 2010

Re: Framemaker 9 vs Microsoft Word

last time. --- On Thu, 6/3/10, Shmuel Wolfson wrote: > From: Shmuel Wolfson > Subject: Re: Framemaker 9 vs Microsoft Word > To: "Framers" > Date: Thursday, June 3, 2010, 8:12 AM > As far as: > "Word has had a bug since 2.0 such that if you > put a hard pa

Re: Framemaker 9 vs Microsoft Word

As far as: "Word has had a bug since 2.0 such that if you put a hard page break directly in front of a heading and then cross-reference to that heading, Word inserts a hard page break in front of the cross-reference." In Word, a cross-reference refers to a bookmark. A bookmark is a selection of

Re: Framemaker 9 vs Microsoft Word

... and lest I forget, numbered lists are a NIGHTMARE in Word, effortless in Frame. On Tue, Jun 1, 2010 at 11:57 AM, Steve Johnson wrote: > Where do you want to start? If you want professional documentation do > not use Word, do not even think about it. > > Word cannot handle cross-references, th

Re: Framemaker 9 vs Microsoft Word

Where do you want to start? If you want professional documentation do not use Word, do not even think about it. Word cannot handle cross-references, there are various anomalies when converting Word to PDF. Word has had a bug since 2.0 such that if you put a hard page break directly in front of a h

Re: Framemaker 9 vs Microsoft Word

There are no analytics of average sentence complexity or grade level. You might want to check out the very inexpensive Readability Tools plugin from . There's no outlining feature with expand/collapse The inexpensive Outline Tools plugin is also availab

Re: Framemaker 9 vs Microsoft Word

Regarding Frame vs Word, let me explain how I use it: I'm a consultant whose vice is book writing. I've been writing books with unstructured Frame since version 4. I'm also obliged to use MS Word when writing reports for clients. Rather than list strong points of each, let me list weak poin

Re: Framemaker 9 vs Microsoft Word

Does anyone have a current comparison they can share?...thanks, Kelly. A Google search of "Word vs FrameMaker" pops up a whole bunch of comparisons. Mike Wickham ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list

Re: Framemaker 9 vs Microsoft Word

I don't think too much has changed between the two in the last few versions, except if you are interested in single sourcing. (Frame has better DITA support than earlier versions.) I find Frame's two greatest advantages to be automatic error checking when updating books and single sourcing. As

RE: Framemaker 9 vs Microsoft Word

ion rich documents need frame. > Date: Tue, 1 Jun 2010 13:07:38 -0400 > Subject: Re: Framemaker 9 vs Microsoft Word > From: techcommd...@gmail.com > To: kmcdan...@pavtech.com > CC: framers@lists.frameusers.com > > You're really talking apples vs. oranges here. Maybe you c

Re: Framemaker 9 vs Microsoft Word

You're really talking apples vs. oranges here. Maybe you could be more specific about what you're looking for? Both allow you to create documents but in potentially very different manners. On Tue, Jun 1, 2010 at 12:44 PM, Kelly McDaniel wrote: > Does anyone have a current comparison they can shar

RE: FrameMaker 9 Repeatable Hard Crash

Subject: RE: FrameMaker 9 Repeatable Hard Crash Classification: NOT PROTECTIVELY MARKED Does the same in XP/FM9p250 unstructured, although I found that ending one of the FM processes in Task Manager zapped the second instance as well, and CPU usage died down immediately. However, one has to ask why

RE: FrameMaker 9 Repeatable Hard Crash

Classification: NOT PROTECTIVELY MARKED Does the same in XP/FM9p250 unstructured, although I found that ending one of the FM processes in Task Manager zapped the second instance as well, and CPU usage died down immediately. However, one has to ask why one would want to import formats from Curre

RE: FrameMaker 9 Repeatable Hard Crash

bject: RE: FrameMaker 9 Repeatable Hard Crash > Date: Wed, 19 May 2010 10:42:36 -0400 > > FM9.0p237 on Windows 7 and I get the same result. If I click outside the > table (not in the title, not in the body of it) and try to > import, it works fine. > > The process I followed was

RE: FrameMaker 9 Repeatable Hard Crash

Hi Oran, I'm unable to reproduce the bug on FM9p250 Win7. What settings are you using on the Import Formats dialog? Or does it matter what settings you use? --Mike > Date: Wed, 19 May 2010 05:17:15 + > From: orand...@comcast.net > To: framers@lists.frameusers.com > Subject: FrameMak

RE: FrameMaker 9 Repeatable Hard Crash

n Petersen Cc: FrameMaker List Subject: Re: FrameMaker 9 Repeatable Hard Crash Followed your directions (3 times in an unstructured doc from different templates) and can't get it to happen on W7. Tried it with both the default titled Format A and untitled. What other add-ins are on your syste

Re: FrameMaker 9 Repeatable Hard Crash

Followed your directions (3 times in an unstructured doc from different templates) and can't get it to happen on W7. Tried it with both the default titled Format A and untitled. What other add-ins are on your system? Any scripts related to tables or new documents? Art Art Campbell art.

RE: FrameMaker 9 Repeatable Hard Crash

FM9.0p237 on Windows 7 and I get the same result. If I click outside the table (not in the title, not in the body of it) and try to import, it works fine. The process I followed was to launch FM, then file > new > document > portrait. File > Save As to my desktop as _DELETEME.fm and then inserte

Re: FrameMaker 9 slow and sometimes unresponsive?

Ah. I did not realize it was saved in the document itself. Thx, Nadine On 29/04/2010 5:33 PM, Scott Prentice wrote: Hi Nadine... Regarding the document magnification issue .. this is the situation for all XML in FrameMaker. The magnification (as well as other document settings) are not save

Re: FrameMaker 9 slow and sometimes unresponsive?

Hi Nadine... Regarding the document magnification issue .. this is the situation for all XML in FrameMaker. The magnification (as well as other document settings) are not saved in the XML, and are reapplied from the template each time you open a file. You can open the template file and set the

Re: FrameMaker 9 slow and sometimes unresponsive?

I've noticed the same issue when I save a file. Usually, it's when I save the first time after opening FM9 (especially DITA XML files). Even if it is only a small file. I agree that the icons on the Paragraph Designer don't map to their actual meaning. But I've started to become used to them O

Re: FrameMaker 9 Crashing and Unusable

Hi Gurpreet, I was on Adobe Acrobat Pro Extended version 9.3.2. Not that it matters. IT ended up reformatting my computer. Sincerely, Joe On Tue, Apr 20, 2010 at 11:05 PM, Gurpreet Virdi wrote: > > Hi Joseph, > > Can you please also share the version of Adobe Acrobat you have? > > Regards, > g

  1   2   >