Hey, I removed my CPU and RAM, and found an old Dell Mouse from 1989, and
now it's all working fine!
JaMi, I laughed out loud when I read your post. Nice sense of humour!
Steve.
Steve,
the guys in the office around me looked at me like I am crazy because I
laughed out loud when I
is part of the PCB by testing it on my
machine.
Freundliche Grüße / Best regards
Waldemar Kulajew
Entwicklung Drehgeber Sensorik
Development Encoders Sensors
_ _ _ _
Fritz Kuebler GmbH
Schubertstrasse 47
78054 Villingen-Schwenningen
Germany
Tel.: +49-7720-3903-44
Fax: +49-7720-811709
on other Layers. Could you
please explain more about it?
Best regards
Waldemar Kulajew
Entwicklung Drehgeber Sensorik
Development Encoders Sensors
Fritz Kuebler GmbH
Schubertstrasse 47
78054 Villingen-Schwenningen
Germany
Tel.: +49-7720-3903-44
Fax: +49-7720-811709
http
Christopher Rhomberg schrieb:
Does anyone know how I can draw new 3D components for use with PCB's 3D
view function.
I have up to know only been able to use the default components and any new ones
are just grey blocks.
Regards
Chris Rhomberg
Chris,
3D-Models only can be
Arghh, it´s early morning in Germany and my brain is still in Bed.
I talked about the *Pro/DESKTOP* tool from *PTC* and nothing else.
The webpage is: http://ptc.com/products/desktop/index.htm
slowly awaking, Waldemar
Original Message
But there is a way to create the
Robert Ritchey schrieb:
Hi,
Sorry, poorly worded question. How can I set the defaults so that when I
do a new PCB I always get what I want on these instead of 20mils as
seems to be the hard-coded default. I would like to be able to go through
everything for a new PCB, set what I want as
Adeel Malik schrieb:
Hi All,
Some FABs require that NC Drill data for PCB fabriaction should be
given to them in Excellon Format. In Protel we have 2:3,2:4, 2:5 in Englich
units and 4:2,4:3,4:4 in Metric Units. Can someone comment as to which of
these formats supported by Protel
handles arcs better then any other Eda-tool whe tested when changing to
Protel.
Best Regards,
Waldemar Kulajew
Bagotronix Tech Support schrieb:
Hello, all:
A customer asked us to design a round (circular) PCB for them. We have
never designed a round PCB before. Any special Protel
to do, and
they deliver us our boards this way.
Waldemar Kulajew
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL
Brad, Dennis and all others
followed the thread so far I got some questions about the Protel-bugs you are
talking about. We always panelize our boards by ourself for they are very small
and we nead some additional holes for our inhouse placement. I have never seen
bugs in Protel during
Abdulrahman
You are right when it comes to Blind vias. But a microvia is not only a blind
via. Because it is driiled by a laser or a similar process there are nearly
complete other requirements. One can chose the hole for a micro via between 0.05
and 0.1mm (2-4mil). The anular ring for
, but no comment. But I
did not know about these Forum at that time so I never asked here. Perhaps some
of the gurus here do know a better way.
Regards,
Waldemar Kulajew
Evan Scarborough schrieb:
I need help setting up a via placement
OK. This is off topic (not about Protel)
-- snip --
I was able to put a multimeter probe on a via and the other probe on the
trace from that via, and after scraping the probe across the trace twice I
went through the solder mask and got a short.
Does this sound like an acceptable
Matt
for there seames to only silence to your question here my coments and
thoughts
-- snip --
I'm wondering, too... Are there any other repositories for shared
libraries or such for components and footprints? More importantly, if not,
are folks out there interested in
Michael,
the only thing I know near to your discription is the
PCB:AutopositionComponentText command, used to automaticaly arnge the
designators and comments of the selected Components. It is found under
Tools | Interactive Placement | Position Component Text.
Or should be there.
Jun,
assuming you are jusing Protel 99SE, there is the way by using Design| update
schematic from the PCB menu. You will get a popup where you can preview and
edit the changes.
Hope this helps,
Waldemar
My PCB is placed and routed manually, the disignators are very different
Ian Wilson schrieb:
On 02:06 PM 13/02/2002 -0800, Brad Velander said:
Anthony,
yes, yes, yes, your memory is functioning better than mine. That is
the exact problem that I had. The problem is initiated or re-initiated by
clicking the Default button on the drawing display order
ElectronTrade (info) schrieb:
--snipp --
Please visit www.qualecad.com
They have plug-in for 3D view of pcb in Protel. But their module can
load 3D models created in Solidworks. I don't use it really but I tested
it a few months ago. It work very good.
I was waiting for the 3D tool to.
Looks nice. But what use is there ?
From a prototype that has been tested I can make a shot
with a digital camera. This image is then used for fabrication
and documentation.
I realize there might be advantages when working with very
bulky parts, assuming collisions are visible. But with
Afshin
just one more informotion: my Fab-house told me I should not tent vias complete.
It couse problems because the soldermask will burst open during HotAirLeveling
or wavesoldering because of the Air inside the via. They told me to leave the
hole open and only put the cover the Copper. I did
Hello everyone
During my redesign of a quite compact Board, I changed the positions and
Footprints of some Components. After the most work was done I discovered there
where vias under some SMD-PADS. For these is a deadly thing during reflow
soldering, I should find out where these
Hello out there,
I am currently working on a design based on an older one. There are a lot of
parts in the Schematic that should disappear. After deleting them in the
Schematic I updatet the PCB and found, naturely, a lot of tracks with no Net.
Now here is my Problem: trying to
[EMAIL PROTECTED] schrieb:
Hi Waldemar,
I tried this Edit Select Net clicking on a No-Net-Track Clear
and oops, all tracks and vias with No Net diappeared in my PCB.
I manually changed them from different nets to No Net before, just as a test.
I hope this will fit for you
Shuping Lew schrieb:
Hello, there, Does anybody know why my netlist on the PCB suddenly turned
into hidden lines instead of solid lines? I did not change anything and not
sure how to changed them back to solid lines again. Thanks in advance.
Susan Lew
Quintron Systems, Inc
Hello,
Maybe
David
the only man I know is Joachim Leonardy here in Germany. He is working with
Protel europe in some way, and offers training in german *and* english. But I
don´t know the Prices for a training you asked for.I have only had a training in
german in our house and don´t remember the
Andrew,
when I first looked in these Forum I run in the name synchroniser to.
Meanwhile I discovered (hope I´m right?)it means the server that apears in
Protel99SE when you chose update|schematic in PCB, or update|pcb in Schematic.
Like Robi just answered (greatings to australia;-) )
Hello all,
Me Again! Hope I can explane my Problem without to many spelling or speaking
mistakes.
I try to layout a board where two Problems apear who seam to cause each other,
and I can not find a workaround.
1. I need to tent my vias half (gap -5mil)
2. I need to set them free
Waldemar Kulajew schrieb:
Hello all,
Me Again! Hope I can explane my Problem without to many spelling or speaking
mistakes.
I try to layout a board where two Problems apear who seam to cause each
other,
and I can not find a workaround.
1. I need to tent my vias half
Nicholas Cobb schrieb:
All,
I have been working with Protel for the last two years and the autopan has
worked fine for me. All of a sudden, in the last couple of days, it has now
go out of control. If I drag a selection around the page I fly from one side
to the other. This is very
Samuel Cox \Sam\ schrieb:
Maybe you can not get it to work right
because you can not spell it right.
Samuel,
and al who are suffering for my terible english spelling and grammar or even
unintelligible sentences.
_I apologize_
_Realy_
For my problems with spelling I have two choices.
1.
Ian Wilson schrieb:
Hello all including Protel Support (who have been CC'ed),
Waldemar sent me his ini, rcs and a sample PCB file. It was not until he
sent the ADVPCB99se.ini file that I could see the problem.
It took some playing about but I found the problem in the Layer Drawing
Brad,
Ian is right. I remember I pressed the default button after changing the
display order to set it to its default. Hope you don´t used it till now. The
only way to set the changes back seams to be by manually changing the .INI file.
and thats very easy with the list Ian send to us.
Brad Velander schrieb:
Brad,
back in the Office again in the Morning I notice my qouestion had caused some
others. So I read the mails and desided to look for my PC-Configuration. For
windows system information showed some unreadable (un-)information i opend the
case I found an Asus
See below
Michael Schmitt schrieb:
What do we want ? we want the copper of the vias being covered with the
solder mask but the via holes open.
I add a solder mask expansion design rule that simply says the rules
attribut is -Minimum_Annular_Ring (what i use for the vias 10mil). This
Hello all,
I am using Mechanical Layers 5 +6 first time and run into an famous effect: my
tracks an these layers disappear! Every time I set an other layer aktiv (i.e
TopLayer) and caus an redraw (i.e. by panning or hit [V]+[R] keys) I cant see my
lines any more. When I set the Llayer
To Mr. Colin Weber
I believe CDs only have a finite life also. Does anyone know how long?
In an Computer-magazin that tested CD-R-live in 1997 I red obout a Time of one
(only one!) year until first foult could be noticed. Dont know wether the times
have changed in the last Years, but make
36 matches
Mail list logo
