Dear All,
The Problem is solved.. SELINUX is causing problem I have disabled it
and run the following command
echo 0 > /selinux/enforce
Regards,
Salman...
From: salmanriaz...@hotmail.com
To: vchkpw@inter7.com
Date: Sun, 22 May 2011 21:25:09 +0600
Subject: [vchkpw] Domain does n
On 24.3.2011 16:34, Remo Mattei wrote:
ok I digged in a little more and the problem is valias domain. I have
5.4.32 recompiled and when I send it to a user that has a virtual domain
it bouces back if I send it to a virtual user that has a full domain it
goes through. Any suggestions?
thanks
t
ok I digged in a little more and the problem is valias domain. I have 5.4.32 recompiled and when I send it to a user that has a virtual domain it bouces back if I send it to a virtual user that has a full domain it goes through. Any suggestions?
thanks
!DSPAM:4d8b565b32712003615774!
On 23.3.2011 17:09, Remo Mattei wrote:
Hello all I have a domain called xxyyxx.us and then the main domain
which is an alias to the xxyyxx.us which is xxyyxx.com when I send an
email to a mailing list to the .com it bouces back if I send it to the
.us it works. Any suggestions?
Also the .us is ex
Nope, domain quotas are currently not supported by vpopmail, if you look in
the sourcecode, you will see that the relevant sections are commented out.
Any options used with ./configure have no effect.
- Wouter
- Original Message -
From: "Geri Anggara" <[EMAIL PROTECTED]>
To:
Sent: T
ed without specifying -q NOQUOTA, perhaps
my error lies in there.
- Wouter
- Original Message -
From: "Rainer Duffner" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, June 10, 2008 9:16 PM
Subject: Re: [vchkpw] Domain wide quotas
Wouter van der Schagt schrieb:
Hi all,
Is it
Wouter van der Schagt schrieb:
Hi all,
Is it possible to disable domain-wide quotas (sum of all popboxes) and
just to use popbox quotas ? At the moment i have both. Or do i have
to set the domain to NOQUOTA and then configure the popbox
individually to have a quota?
Sincerely,
- Wouter van der
the bounce from google.
This is an automatically generated Delivery Status Notification
THIS IS A WARNING MESSAGE ONLY.
YOU DO NOT NEED TO RESEND YOUR MESSAGE.
Delivery to the following recipient has been delayed:
[EMAIL PROTECTED]
Message will be retried for 2 more day(s)
Technica
hi,
can you be more specific? can you at least tell us something like the
exact error messages generated by your qmail for this particular
transaction? there are many places that can cause failed delivery.
perhaps the best place to look for hints would be the log file.
regards,
reuben
Sam
Hey Rick;
> -Original Message-
> From: Rick Widmer [mailto:[EMAIL PROTECTED]
> Sent: Monday, September 03, 2007 6:02 PM
> To: vchkpw@inter7.com
> Subject: Re: [vchkpw] Domain limits
>
>
>
> Tren Blackburn wrote:
> > Hey;
> >
> >> --
Tren Blackburn wrote:
Hey;
-Original Message-
From: Quey [mailto:[EMAIL PROTECTED]
Sent: Monday, September 03, 2007 2:57 PM
To: vpopmail-list
Subject: [vchkpw] Domain limits
Hi,
Yes I know they are " Broken", however... I saw a recent post (I
think
on this list) claiming it works
Hi Tren,
Tren Blackburn wrote:
Hey;
-Original Message-
From: Quey [mailto:[EMAIL PROTECTED]
Sent: Monday, September 03, 2007 2:57 PM
To: vpopmail-list
Subject: [vchkpw] Domain limits
Hi,
Yes I know they are " Broken", however... I saw a recent post (I
think
on this list
Hey;
> -Original Message-
> From: Quey [mailto:[EMAIL PROTECTED]
> Sent: Monday, September 03, 2007 2:57 PM
> To: vpopmail-list
> Subject: [vchkpw] Domain limits
>
> Hi,
> Yes I know they are " Broken", however... I saw a recent post (I
think
> on this list) claiming it works to 2G, is t
At 03.15 29/10/2006, you wrote:
On Oct 28, 2006, at 11:37 AM, Jeff Koch wrote:
I remember reading on the list some time ago that domain quotas
didn't work. Has this been fixed? If so, are there any doc's on how
this works? Specifically when the domain quotas is reached who is
notified?
I don't
Hello
I am on annual leave until November 5th 2006.
If you have an urgent query please leave a voicemail on 07940574707 and I will
get back to you as soon as possible.
Regards
Gerard Earley
Hello
I am on annual leave until November 5th 2006.
If you have an urgent query please leave a voicemail on 07940574707 and I will
get back to you as soon as possible.
Regards
Gerard Earley
On Oct 28, 2006, at 11:37 AM, Jeff Koch wrote:
I remember reading on the list some time ago that domain quotas
didn't work. Has this been fixed? If so, are there any doc's on how
this works? Specifically when the domain quotas is reached who is
notified?
I don't think domain quotas worked
[EMAIL PROTECTED] wrote:
Thanks for the input. I'll give it a try.
On May 24, 2006, at 12:39 PM, [EMAIL PROTECTED] wrote:
Have vpopmail running and its working very well. :) One of my clients
has
xxx.com for their domain. The just changed their company name and need
to
change to a new email
Thanks for the input. I'll give it a try.
> On May 24, 2006, at 12:39 PM, [EMAIL PROTECTED] wrote:
>> Have vpopmail running and its working very well. :) One of my clients
>> has
>> xxx.com for their domain. The just changed their company name and need
>> to
>> change to a new email domain yyy.c
On May 24, 2006, at 12:39 PM, [EMAIL PROTECTED] wrote:
Have vpopmail running and its working very well. :) One of my clients
has
xxx.com for their domain. The just changed their company name and need
to
change to a new email domain yyy.com. What is the easiest way to
migrate
to the new yyy.com
[EMAIL PROTECTED] wrote:
Have vpopmail running and its working very well. :) One of my clients has
xxx.com for their domain. The just changed their company name and need to
change to a new email domain yyy.com. What is the easiest way to migrate
to the new yyy.com domain. Should I just create the
Rainer Duffner wrote:
Ken Jones wrote:
kengheng wrote:
Hi, when will the domain quota feature back to vpopmail?
Thanks.
Probably never. It is too resource intensive.
I recommend using operating system user quotas.
Place each domain under a different user and let
the file system handle th
Rick Macdougall wrote:
Rainer Duffner wrote:
Ken Jones wrote:
kengheng wrote:
Hi, when will the domain quota feature back to vpopmail?
Thanks.
Probably never. It is too resource intensive.
I recommend using operating system user quotas.
Place each domain under a different user and let
the
Rainer Duffner wrote:
Ken Jones wrote:
kengheng wrote:
Hi, when will the domain quota feature back to vpopmail?
Thanks.
Probably never. It is too resource intensive.
I recommend using operating system user quotas.
Place each domain under a different user and let
the file system handle the q
Ken Jones wrote:
kengheng wrote:
Hi, when will the domain quota feature back to vpopmail?
Thanks.
Probably never. It is too resource intensive.
I recommend using operating system user quotas.
Place each domain under a different user and let
the file system handle the quota.
I assume you h
Ken Jones wrote:
kengheng wrote:
Hi, when will the domain quota feature back to vpopmail?
Thanks.
Probably never. It is too resource intensive.
I recommend using operating system user quotas.
Place each domain under a different user and let
the file system handle the quota.
This is also hel
kengheng wrote:
Hi, when will the domain quota feature back to vpopmail?
Thanks.
Probably never. It is too resource intensive.
I recommend using operating system user quotas.
Place each domain under a different user and let
the file system handle the quota.
This is also helpful if you host t
Bastiaan van der Put wrote:
Hmm I noticed I didnt compile with domainquota's the first time.
After compiling with the support, I do get a bounce msg now the user
is overquota??
user limit = -1
Domainquota = 16 MB(just to test)
What exact is broken about it?
Hi,
Everything about it is br
What exact is broken about it?
Seems it only bounces emails with attachments.
Bas
At 18:00 8/5/2005, you wrote:
Bastiaan van der Put wrote:
Hi,
I have been using vpopmail with user quota's for some time now.
I want to move to domainlimits, is it possible to set the user quota to -1
and doma
Hmm I noticed I didnt compile with domainquota's the first time.
After compiling with the support, I do get a bounce msg now the user is
overquota??
user limit = -1
Domainquota = 16 MB(just to test)
What exact is broken about it?
Bas
At 18:00 8/5/2005, you wrote:
Bastiaan van der Put wrote
Thanks for the quick reply.
I will turn it back off, I noticed it didn't work as I expected.
Bas
At 18:00 8/5/2005, you wrote:
Bastiaan van der Put wrote:
Hi,
I have been using vpopmail with user quota's for some time now.
I want to move to domainlimits, is it possible to set the user quota
Bastiaan van der Put wrote:
Hi,
I have been using vpopmail with user quota's for some time now.
I want to move to domainlimits, is it possible to set the user quota
to -1
and domainquota to say 500 MB on a domain.
If the 500 MB is reached for the domain will the emails be bounced or
does v
Bastiaan van der Put wrote:
Hi,
I have been using vpopmail with user quota's for some time now.
I want to move to domainlimits, is it possible to set the user quota
to -1
and domainquota to say 500 MB on a domain.
If the 500 MB is reached for the domain will the emails be bounced or
does v
On Mon, May 02, 2005 at 11:03:17AM -0700, Tom Collins wrote:
> >Well, if I use OS-quotas then qmailadmin does not work.
>
> User quotas, as set in QmailAdmin, will still work.
No I want domain quotas too. When I create a domain using -u/-d of
adddomain qmailadmin does not work for that domain. G
On May 2, 2005, at 7:43 AM, Payal Rathod wrote:
On Mon, May 02, 2005 at 11:36:28AM +0200, Rainer Duffner wrote:
The (undocumened) fact that they have been broken long since.
Can someone from inter7 second that please?
I'm not from Inter7, but I've worked on the source enough to know that
domain qu
On Mon, May 02, 2005 at 11:36:28AM +0200, Rainer Duffner wrote:
> The (undocumened) fact that they have been broken long since.
Can someone from inter7 second that please?
> Use OS-quotas or just bill-by-volume and employ any of the homegrown
> "report-usage"-scripts... ;-)
Well, if I use OS-qu
Good evening,
On 2/5/05 at 11:36 AM +0200, Rainer Duffner <[EMAIL PROTECTED]> wrote:
>Use OS-quotas or just bill-by-volume and employ any of the homegrown
>"report-usage"-scripts... ;-)
I'd love some pointers on implementing 'homegrown "report-usage"-scripts'. Can
you suggest some appropriate d
Payal Rathod wrote:
Hi,
I am having a strange problem in domain quotas. In vpopmail-5.4.1 I
with,
./configure --enable-domainquotas
# pwd
/home/vpopmail/domains/example.net
# cat .qmailadmin-limits
maxpopaccounts: -1
maxaliases: -1
maxforwards: -1
maxautoresponders: -1
maxmailinglists: -1
quota:
On Nov 17, 2004, at 9:29 AM, Lars E. D. Jensen wrote:
I would like to know the status of domain quota. I've seen a little on
the
mailing list, but nothing complete.
Domain quotas are broken. Even if/when they do work, they add a lot of
load to the system since vdelivermail has to look at all mai
On Sun, 8 Aug 2004, Jeremy Kitchen wrote:
> On Sunday 08 August 2004 03:07 am, Micah Abrams wrote:
> > Jeremy:
> >
> > Thanks for the $5 :) Actually the only place the domain shows up (in
> > /var/qmail/control) is in:
> >
> > control/rcpthosts
> > control/virtualdomains
> >
> perhaps your /var/q
http://scriptkitchen.com/godkills.jpg <--- please, think of the kittens.
On Sunday 08 August 2004 03:07 am, Micah Abrams wrote:
> Jeremy:
>
> Thanks for the $5 :) Actually the only place the domain shows up (in
> /var/qmail/control) is in:
>
> control/rcpthosts
> control/virtualdomains
>
> The lo
e are about
130 other domains on the server and everything else is working fine. Any
other ideas?
Micah
> -Original Message-
> From: Jeremy Kitchen [mailto:[EMAIL PROTECTED]
> Sent: Sunday, August 08, 2004 12:56 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [vchkpw] domai
On Saturday 07 August 2004 07:55 pm, Micah Abrams wrote:
> Dear list:
>
> I have a strange problem that I am hoping one of you can help me with. I
> have had my qmail/vpop server running for a few years now and everything
> has been running great. I have created an account on one of the domains
>
Hi Tom:
Soft quotas are OK - do they send out emails? If not, I guess we could
write a script to check domain diskspace usuage.
At 12:10 PM 4/12/2004, you wrote:
On Apr 12, 2004, at 7:54 AM, Jeff Koch wrote:
Are domain quotas working OK in the latest vpopmail release?
To the best of my knowledge
On Apr 12, 2004, at 7:54 AM, Jeff Koch wrote:
Are domain quotas working OK in the latest vpopmail release?
To the best of my knowledge, domain quotas do not work. There was a
time that they caused vdelivermail to crash, but now they just aren't
enforced.
--
Tom Collins - [EMAIL PROTECTED]
Qma
I too would like to know the same information along those lines. Are the
quotas in qmail a way to control actual disk quotas on the file system,
meaning I'd have to have quota support in my kernel before I use this
feature, or is this just something ad-hoc that vpopmail has done at a
"higher level"
On Friday, January 23, 2004, at 11:40 PM, Jeremy Kitchen wrote:
On Fri, 2004-01-23 at 19:41, Jason Parker wrote:
FYI -
[snip]
so what's wrong with rsync?
-Jeremy
In short - I may only have one system to work with in this case
(working on that)... there is still tar. I'm not storing mail and am
On Fri, 2004-01-23 at 19:41, Jason Parker wrote:
> FYI -
[snip]
so what's wrong with rsync?
-Jeremy
--
Jeremy Kitchen <[EMAIL PROTECTED]>
On Thursday 23 October 2003 20:48, B. Cook wrote:
> Hello,
>
> I've been trying to figure out how to get domain quota's working.
> I'm
wondering if anyone else does them.
>
> Do I need to zero out the users quota in order for domain quota's to
> work?
no. vlimits support domain quotas. the set
on 10/6/03 7:42 PM, W.D. McKinney <[EMAIL PROTECTED]> wrote:
> This is frustrating:
>
> mailman# cd /usr/home/vpopmail
> mailman# cd bin
> mailman# ./vdeldomain deesignnet.com
> Error: Domain does not exist
> mailman# ./vadddomain deesignnet.com
> Please enter password for postmaster:
> enter pas
On Tuesday 29 July 2003 05:11, Clayton Milos wrote:
> I am running a mail serer and i enabled domain quotas. I would like to
> know how to set the quotas for each domain.
it never fails to amaze me how many people don't bother to read the
documentation that comes with the software...
first read
On Saturday 19 July 2003 12:01, Paul Theodoropoulos wrote:
> >i now want to convert to domain quotas, wherein i give the domain a 'bulk'
> >quota, then the customer can allocate individual user quotas within that
> >total. but i'm a little confused about a couple of things:
> >
I already sent some
- Original Message -
From: "Jesse Guardiani" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, July 25, 2003 1:14 PM
Subject: Re: [vchkpw] domain quotas query
> On Saturday 19 July 2003 12:01, Paul Theodoropoulos wrote:
> > so gee, did i rea
On Saturday 19 July 2003 12:01, Paul Theodoropoulos wrote:
> so gee, did i really stump the stars on this one? nobody out there has
> converted to domain quotas?
Very few, I'd bet.
I took a look at the new domain soft quota code a few months ago (you
might remember the heated discussion I had wit
so gee, did i really stump the stars on this one? nobody out there has
converted to domain quotas?
At 11:42 AM 7/18/2003, Paul Theodoropoulos wrote:
i'm about to upgrade from vpopmail 5.3.18 to 5.3.20. i'm also going to
upgrade qmailadmin to the latest dev version.
i have until now been runnin
ot;Ken Winke" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, July 02, 2003 11:16
AM
Subject: Re: [vchkpw] domain already exists?? no it
doesn't!
> Hi,> > Check the /var/qmail/control files and the
/var/qmail/users/assign file.> > Regards,&g
Hi,
Check the /var/qmail/control files and the /var/qmail/users/assign file.
Regards,
Rick
Ken Winke wrote:
I'm working with vpopmail-5.3.20 attempting to create domains for a
brand new mail server, and it's not playing very nice. When running the
vadddomain command, I get the response that
i though if you install vqadmin
their is a feature on the domain quota..
tq
> Jesus Bernardo Ruiz Flores wrote:
>
> Is there a way to restric the quota in a domain bases, i mean if i have 5 users i
> want a domain quota of 50MB but this quota have to be general for the entire domain,
> not rest
Para: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Asunto: Re: [vchkpw] Domain Quota
>
>
> Hi,
>
> You can do that starting with Development version 5.3.19
>
> See http://www.inter7.com/develop.html
>
> Regards,
>
> Rick
>
> - Original Message -
> F
Hi,
You can do that starting with Development version 5.3.19
See http://www.inter7.com/develop.html
Regards,
Rick
- Original Message -
From: "Jesus Bernardo Ruiz Flores" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 02, 2003 10:22 AM
Subject: [vchkpw] Domain Quota
At 26/03/03 26/03/03 -0500, you wrote:
> >I don't believe the "Sent" folder keeps track of any size.
> >I looked and don't see any "maildirsize" files in "Sent" folders.
> >So it doesn't look like it counts against either user or domain
> >quotas. You'll have to take a look at the spec to
Hi Ajaj,
> But since all email files are "owned" by the vpopmail user that doesn't
> give you much flexibility if you want to implement quotas on a
> per-domain or per-user basis.
That's why Brian suggested to create each domain under its own system
user. It's easy, and it _works_.
Personally,
> > Even the courier readme recommends using system quotas.
>
> But since all email files are "owned" by the vpopmail user that doesn't
> give you much flexibility if you want to implement quotas on a
> per-domain or per-user basis.
When you create the account, use vadddomain -u usern
Brian Kolaci wrote:
Even the courier readme recommends using system quotas.
But since all email files are "owned" by the vpopmail user that doesn't
give you much flexibility if you want to implement quotas on a
per-domain or per-user basis.
--
Aj.
Systems Administrator / Developer
> >I don't believe the "Sent" folder keeps track of any size.
> >I looked and don't see any "maildirsize" files in "Sent" folders.
> >So it doesn't look like it counts against either user or domain
> >quotas. You'll have to take a look at the spec to be sure.
> >I don't believe the Tras
At 26/03/03 26/03/03 -0500, Brian Kolaci wrote:
> >When a message arrives and is delivered by vdelivermail,
> >the quotas are enforced. It also updates the maildirsize
> >file (and uses the maildir++ naming conventions) thereby
> >updating the maildir++ quota usage that is shared amongst
> >When a message arrives and is delivered by vdelivermail,
> >the quotas are enforced. It also updates the maildirsize
> >file (and uses the maildir++ naming conventions) thereby
> >updating the maildir++ quota usage that is shared amongst
> >all maildir++ compatible software.
> >
At 26/03/03 26/03/03 -0500, Brian Kolaci wrote:
When a message arrives and is delivered by vdelivermail,
the quotas are enforced. It also updates the maildirsize
file (and uses the maildir++ naming conventions) thereby
updating the maildir++ quota usage that is shared amongst
all maildir++ compat
When a message arrives and is delivered by vdelivermail,
the quotas are enforced. It also updates the maildirsize
file (and uses the maildir++ naming conventions) thereby
updating the maildir++ quota usage that is shared amongst
all maildir++ compatible software.
>From what I understand of maild
Brian,
when you store a message inside an imap server (like when using
squirrelmail & courier, and keeping your outgoing message in the "Sent"
folder), or when using sqwebmail just keep it in the "Sent" or upload an
attach, which quota computing is done: courier, sqwebmail or vpopmail?
I think
The domain quota code (as well as the user quota code)
is enforced in the vdelivermail program. It should be
compatible with courier-imap, but not maildrop. It also
works within qmailadmin. I'm not familiar with sqwebmail
internals.
Brian
> Please correct me if I'm wrong...
>
> As far
Please correct me if I'm wrong...
As far as I understand, the domain quota code included in the last
development version of vpopmail is NOT 100% compatible with other programs
like sqwebmail, courier, ecc., so you may have some disalignments,
depending on the products you're using.
Tonino
At
Hi Rick,
> Is it possible to set a quota for an entire domain using vpopmail?
One of the top ten questions on the list. You didn't check the archives,
didn't you? :)
In short:
For the stable version of vpopmail, there is no domain quota support,
but you can create the domain under a dedicated s
> Is it possible to set a quota for an entire domain using vpopmail?
>
> - Rick
>
>
Yes. You will need vpopmail 5.3.19 or up.
You need to populate the mysql "diskquota"
or the .qmailadmin-limits file attribute "quota"
to the size (in bytes).
Brian
On Wed, 26 Mar 2003 08:14:30 -0500
Rick Root <[EMAIL PROTECTED]> wrote:
> Is it possible to set a quota for an entire domain using vpopmail?
>
> - Rick
>
>
>
nope, what i think of.
but some person try to complete that using hard quota.
--
thx
onOs
UPPTI - Universitas Brawijaya
sure you can
but who will do a simple hack in vpopmail code ??
for my server it's sufficient with all the feature under vpopmail
because we only had 2 mail server
On 18 Mar 2003 07:00:47 -
[EMAIL PROTECTED] wrote:
>
> Hi !!
>
> > Subject: Re: [vchkpw] *.doma
Hi !!
> Subject: Re: [vchkpw] *.domain
>
> Hi Raboo,
>
> > how do you like add in vpopmail?
> > *.domain???
> >
> > if i want to get the mail for all the subdomains of a domain
>
> There is no such option in vpopmail.
>
> Jonas
...but
Hi Raboo,
> how do you like add in vpopmail?
> *.domain???
>
> if i want to get the mail for all the subdomains of a domain
There is no such option in vpopmail.
Jonas
i got lost the point here ??
is your point to make all subdomain email under 1 mail server ??
i think this is just setting up your mx in ns server
and mail server configure for virtual for all subdomain
and i dont think there is *.domain under vpopmail
but if you change some code you may add them
I already had it working thanks to Brian. I installed vpopmail version
5.3.19.
Thanks
-Original Message-
From: Brad King [mailto:[EMAIL PROTECTED]
Sent: Friday, March 14, 2003 5:39 AM
To: Jason
Subject: Re: [vchkpw] domain quota
The quota for a domain, will only be active for the user
Hi Brian,
Got it working...thanks a lot!
Jason
-Original Message-
From: Brian Kolaci [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 13, 2003 9:33 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: [vchkpw] domain quota
5.3.19
You can get it from http://shupp.org
Brian
5.3.19
You can get it from http://shupp.org
Brian
> is it 5.3.19 or 5.3.16?
>
> -Original Message-
> From: Brian Kolaci [mailto:[EMAIL PROTECTED]
> Sent: Thursday, March 13, 2003 8:59 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subj
is it 5.3.19 or 5.3.16?
-Original Message-
From: Brian Kolaci [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 13, 2003 8:59 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: [vchkpw] domain quota
domain quotas were implemented in vpopmail 5.3.19.
Brian
> He
domain quotas were implemented in vpopmail 5.3.19.
Brian
> Hello,
>
> I've tried playing around with quotas on my qmail+vpopmail+qmailadmin setup.
> User quota works. But when I try to set domain quota on .qmailadmin-limits
> (default_quota X) in the ~vpopmail/domains/somedomain.
Hi,
In /var/qmail/users/assign
Regards,
Rick
- Original Message -
From: "jake" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 06, 2003 4:30 PM
Subject: [vchkpw] domain problem
I installed vpopmail on a server, then moved to a new box and moved data
over. 1 thing i m
In /var/qmail/users/assign. You'll notice that the uid/gid of vpopmail is
in that file, change it to the new uid/gid of the vpopmail user then run
/var/qmail/bin/qmail-newu
-Clayton
-Original Message-
From: jake [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 06, 2003 1:30 PM
To: [EMAIL
Hi Alfredo,
> How can I deny certain vpopmail domains from sending e-mails to an
> external network.
Judging from the docs: "vmoduser -r ".
Jonas
On Friday 17 January 2003 05:38 am, Ruslan Spivak wrote:
> Hello, vchkpw users!
>
> Could you help me with the following(qmail+vpopmail):
>
> i have domain is.lg.ua, i've created domain 'master.is.lg.ua' and one
> account - [EMAIL PROTECTED]
> Is it possible to do so that all mail sent to address
>
On Fri, Jan 17, 2003 at 01:38:10PM +0200, Ruslan Spivak wrote:
> Is it possible to do so that all mail sent to address
> [EMAIL PROTECTED] will be sent to [EMAIL PROTECTED]?
> xxx - maybe any address and 'xxx' really doesn't exist.
echo "&[EMAIL PROTECTED]" > ~vpopmail/domains/master.is.lg.ua/.qm
On Thursday, November 21, 2002, at 05:43 PM, Brian Kolaci wrote:
Hi,
Bill, if your there, you'd probably know this one off
the top of your head...
Is there a maildir function to gather the current usage
for a whole domain? I know its easy for disk based usage,
but what about maildir quotas?
Currently I use a separate system user for each domain,
and I bundle mail & web together with one quota.
I have a patched vdelivermail that enforces both per-user
and per-domain quotas, but not through maildir quotas.
I just submitted the patch for the vlimits data structure
and am currently upd
On Tuesday 15 October 2002 01:07 pm, Neo Wee Teck wrote:
> Is there anyway to set a fixed quota for a domain?
> Eg.
>
> Domain xxx.com > 200MB
>
> Users can be added and a total storage space for the domain is 200MB.
>
> Any idea? Please advise :)
The most efficent way we've found to do domain ba
92 matches
Mail list logo