BODY oncontextmenu=return false dir=ltr style=OVERFLOW-Y: scroll leftMargin=0
topMargin=0 rightMargin=0DIV id=wrteplaceholder style=FONT-FAMILY: Arial
name=wrteplaceholder
DIVBRBRmy freebsd installed openssl 0.9.7d BRnow installing jabberd 2.0.2 :
BRcd /usr/ports/net/jabbdrd/ BRmake
Hi, i am Bulgaria from. I use FreeBsd about 2 years, and i am very
impressed.
After read in detail VPN over IPSEC from handbook, I can't find a solution
how to run VPN server if the remote clients are with dynamic ip adresses.
Thank you
Jay O'Brien wrote:
I can run kbdcontrol -h 500 or vidcontrol -h 500 to set the
scroll back keyboard history buffer to 500 lines for the
virtual terminal I'm using. How can I make that happen at
boot, in the same manner as I run allscreens_flags in
rc.conf to set other terminal
On Tue, 17 Aug 2004, Benjamin Sobotta wrote:
Hi
I don't know about the controller but in general this should work. Just make
proper adjustments in your BIOS. I'm booting FreeBSD from an SATA RAID0.
Works perfectly fine.
My BIOS doesn't show any boot options for SATA, neither does the
controller.
Hi,
I'm also still very interested in this driver, so far I haven't received any
response. I hope someone takes care that it is included in FreeBSD 5.
Raphael
PS: I'm not registered to the freebsd-questions list, please cc me on reply.
On Wednesday 18 August 2004 04:04, you wrote:
hello all,
I have install freebsd 4.x,and have two netcards.
I want it as getway.
I have config gateway_enable=YES in rc.conf,and then reboot.
[a pc][freebsd]---[b pc]
After reboot , I try to use a pc to ping b pc ,it`s not work ,but a pc and
b pc can ping freebsd successful,why?
Please give me
I have install freebsd 4.x,and have two netcards.
I want it as getway.
I have config gateway_enable=YES in rc.conf,and then reboot.
[a pc][freebsd]---[b pc]
After reboot , I try to use a pc to ping b pc ,it`s not work ,but a pc and
b pc can ping freebsd successful,why?
Please give me
Hi there, I'm a network novice and want to establish
this:
@home we have a cable internet connection and I want
to attach a router to it to be able to share the
internet connection of 1 standalone winxp pc and a
laptop running freebsd 4.10
The cable connection uses dhcp to assign me a
ip-address.
It doesn't work for me when placed in rc.conf, with either
a direct command or attempting to use allscreens_flags.
I run 5.2.1 myself, but if anything I write is incorrect
for 4.10 someone will surely correct me shortly.
It looks to me like you've been putting your parameter in
the wrong string;
On Aug 18, 2004, at 01:40, Dino Vliet wrote:
@home we have a cable internet connection and I want
to attach a router to it to be able to share the
internet connection of 1 standalone winxp pc and a
laptop running freebsd 4.10
The cable connection uses dhcp to assign me a
ip-address. I also would
Hiya
For the last few months, I've had a problem where a small number (less
than ~1 in 1000) of e-mails get corrupted. All I have in my Maildir
is something like the following two lines:
Return-Path: [EMAIL PROTECTED]
Delivered-To: [EMAIL PROTECTED]
In case case it's a spam so it's no great
On 2004-08-17 21:51, Duane Winner wrote:
Gary Kline wrote:
On Tue, Aug 17, 2004 at 12:41:02PM -0400, Duane Winner wrote:
Found a solution!
In ~/.bashrc, put this:
cd ()
{
builtin cd $@
/usr/local/bin/xtset [EMAIL PROTECTED]:`pwd`
}
I've got a slight problem with having the
Good day!
Sorry about my stupid questions, but i can't resolve my problem by
myself. I've read a lot of pages and FAQs but can't do this:
I have Intel PRO/1000 Network Card on Albatron motherb PX865PE ProII
oard with Inter 82865PE chipset.
After boot network card doesn't work. I think it's
Since you use bash, you can use the variable
PROMPT_COMMAND to execute something,
just before the shell prints out PS1. And then
you can set the xterm's title using something
like this:
echo -ne \033]0;my xterm\007
Cheers, NikV
On Tuesday 17 August 2004 20:10, Duane Winner wrote:
This is a
On my laptop I'm experiencing a problem with dhclient. When I
bootstrap the laptop (FreeBSD 5.2.1) after the server (FreeBSD 4.10),
dhclient fails to get a lease within a useful time, while, if I
bootstrap the server after the laptop, it gets immediately the lease.
When the client is stuck in
On Wed, 18 Aug 2004, Kevin Stevens wrote:
On Aug 18, 2004, at 01:40, Dino Vliet wrote:
@home we have a cable internet connection and I want
to attach a router to it to be able to share the
internet connection of 1 standalone winxp pc and a
laptop running freebsd 4.10
The cable connection uses dhcp
Hi,
I installed FREEBSD 5.2.1. I can telnet to Free BSD box from Windows 2000
client. I can telnet to it with my USERNAME and PASSWORD. Then I want to be
root. So I issue SU - ( or SU - root). then FreeBSD box asks me the
password (root's password ).
when I give root's password, FreeBSD box does
The [EMAIL PROTECTED] mailing list is the right place to ask
this sort of question.
You have to add your user to the wheel group to be able to su.
pw groupmod wheel -m yourusername
should do the trick.
Marc
---BeginMessage---
Hi,
I installed FREEBSD 5.2.1. I can telnet to Free BSD box from
Version : FreeBSDi386-5.2.1
Foreword : FreeBSD5.2.1 is used because 4.1 don't recognized
my motherboard correctly.
Hi,
some trouble to start an integrated Ethernet Device
by FreeBSD.
Loader give the message :
pci2: network, ethernet at device 8.0 (no driver attached)
in my case, i'm using :
.oO( Internet )Oo.
||
||
[DSL--]
[ adsl router ] - No Nat
[-]
On Tue, 17 Aug 2004 15:47:50 -0700, Jay O'Brien [EMAIL PROTECTED]
said:
[snip]
After over an hour and a half of downloading (and I have a 1.3MHz DSL) I
tried again. Now I get different error messages, and I don't understand
at all what this unwanted download has done to my computer.
The
hi,
please be more specific when asking a question. Read
http://www.freebsd.org/doc/en_US.ISO8859-1/articles/freebsd-questions/
about how to ask question on this list.
as a second note, read the User Account Management documentation
Version : FreeBSDi386-5.2.1
Foreword : FreeBSD5.2.1 is used because 4.1 don't recognized
my motherboard correctly.
Note : this email following : KERNEL : Ethernet Device not recog.
by [EMAIL PROTECTED] at Wed, 18 August 10:59 GMT
Hi,
it seem that the following PCI_ID is not included in
the module
Dear all:
I have install freebsd 4.x,and have two netcards.
I want it as getway.
I have config gateway_enable=YES in rc.conf,and then reboot.
[a pc][freebsd]---[b pc]
After reboot , I try to use a pc to ping b pc ,it`s not work ,but a pc and b pc can
ping freebsd successful,why?
Im running a freebsd 4.10 and the other morning i noticed this in my
ps -ax output.
13560 ?? Is 0:00.00 portmap 218.49.183.17
Now ive denied portmap from /etc/hosts.allow ...however accrding to the
above ps listing ...this IP managed to make a connection to portmap ..
what portmap used
forgive me for posting this twice...i forgot what email address is allowd
on this list...anywho..
Im running a freebsd 4.10 and the other morning i noticed this in my
ps -ax output.
13560 ?? Is 0:00.00 portmap 218.49.183.17
Now ive denied portmap from /etc/hosts.allow ...however
Ok my setup is something a little different but still works on the same
premise
Internal Lan --- 10base Hub --- FBSD -- Internet
THe only thing that I have different is the 24 port hub inbetween my lan and
the FreeBSD box.
It's been awhile since it was configured but here is an excerpt from my
On 08/18/04 12:01 AM, Jay O'Brien sat at the `puter and typed:
Jay O'Brien wrote:
I can run kbdcontrol -h 500 or vidcontrol -h 500 to set the
scroll back keyboard history buffer to 500 lines for the
virtual terminal I'm using. How can I make that happen at
boot, in the same manner as
On Wed, Aug 18, 2004 at 03:36:31PM +0800, AETCH wrote:
I have install freebsd 4.x,and have two netcards.
I want it as getway.
I have config gateway_enable=YES in rc.conf,and then reboot.
[a pc][freebsd]---[b pc]
After reboot , I try to use a pc to ping b pc ,it`s not work ,but a
Hello,
Late couple days on our Freebsd 4.7 email/web server I've got this message in the
nightly cron jobs:
Checking setuid files and devices:
Checking for uids of 0:
root 0
toor 0
I've searched and some said it had to do with an incomplete dmesg or something like
that. There are some errors:
Dear Ladies and Gentlemen,
I'd appreciate some help/clues on how to solve the following problem.
I have acquired some 3 old-ish HP Netserver LH4r. They come with
built-in RAID adapters.
I have installed FreeBSD (well, that is the only one I could anyway),
but I am hitting a snag: When I boot
Jason Lieurance wrote:
Hello,
Late couple days on our Freebsd 4.7 email/web server I've got this message in the
nightly cron jobs:
Checking setuid files and devices:
Checking for uids of 0:
root 0
toor 0
You have this line:
# 300.chkuid0
daily_status_security_chkuid0_enable=YES
set in
hi,
please be more specific when asking a question. Read
http://www.freebsd.org/doc/en_US.ISO8859-1/articles/freebsd-questions/
about how to ask question on this list.
as a second note, read the User Account Management documentation
indunil wrote:
Hi,
I installed FREEBSD 5.2.1. I can telnet to Free BSD box from Windows 2000
client. I can telnet to it with my USERNAME and PASSWORD. Then I want to be
root. So I issue SU - ( or SU - root). then FreeBSD box asks me the
password (root's password ).
when I give root's password,
On Wed, Aug 18, 2004 at 08:37:34AM -0500, James A. Coulter typed:
On Wed, Aug 18, 2004 at 03:36:31PM +0800, AETCH wrote:
I have install freebsd 4.x,and have two netcards.
I want it as getway.
I have config gateway_enable=YES in rc.conf,and then reboot.
[a pc][freebsd]---[b
On Wed, Aug 18, 2004 at 09:04:48AM -0500, Kevin D. Kinsey, DaleCo, S.P. wrote:
Jason Lieurance wrote:
Hello,
Late couple days on our Freebsd 4.7 email/web server I've got this message
in the
nightly cron jobs:
Checking setuid files and devices:
Checking for uids of 0:
root 0
On Wed, Aug 18, 2004 at 10:04:53AM -0400, Jerry McAllister typed:
hi,
please be more specific when asking a question. Read
http://www.freebsd.org/doc/en_US.ISO8859-1/articles/freebsd-questions/
about how to ask question on this list.
as a second note, read the User Account
Quick question
I'm not sure about the license that FreeBSD falls under. Are we allowed to modify
code (specifically /sbin/natd) and resell it commercially as part of a product??
Secondly, natd runs via divert in usermode. Is there something similar in kernel
mode? Kernelmode will
What is the correct command line syntax for defining a
variable to the Makefile?
The expect port will make either with or without X11 support.
I want it without X11 and there is an ifdefine WITHOUT_X11 test in the
Makefile. My only problem is I remember that it can be done, but I
On Wed, Aug 18, 2004 at 09:54:15AM +0100 or thereabouts, Jonathan Belson wrote:
For the last few months, I've had a problem where a small number (less
than ~1 in 1000) of e-mails get corrupted. All I have in my Maildir
is something like the following two lines:
Here is my .qmail, which
Bob -
Thanks for the info about finding the php-frontend on their site.
Do you have any information about the database question I had?? Does
the referenced shell script, that I can't find, do anything other than
just creating the database and creating the users?? I'm really
wondering what
Use the -D switch, for instance
make -DWITHOUT_X11 install clean
or set it to a specific value (which in effect will also define it)
make WITHOUT_X11=1 install clean
/Emil A Eklund ([EMAIL PROTECTED])
- Original Message -
From: Martin McCormick [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Greetings,
I'm running 4.10. And I just and ran portupgrade and got php-4.3.8. I
read the UPDATING file and noticed that the php4 extensions are now
installed separately [/usr/ports/lang/php4-extensions].
Note: I'm running Apache-1.3.31
So I installed (make install make clean) the php4
Thank you. that is what I needed.
Martin McCormick
Emil A Eklund writes:
Use the -D switch, for instance
make -DWITHOUT_X11 install clean
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Hey all,
I'm currently trying to install X.Org onto my FreeBSD 4.10 machine but
am running into trouble. I followed the instructions in
/usr/ports/UPDATING but to no avail.
Basically, I deleted XFree and imake using pkg_deinstall -f XFree\* imake\*
and then I go to /usr/ports/x11/xorg and
On Wed, Aug 18, 2004 at 08:46:58AM -0700, Mike wrote:
I'm running 4.10. And I just and ran portupgrade and got php-4.3.8. I
read the UPDATING file and noticed that the php4 extensions are now
installed separately [/usr/ports/lang/php4-extensions].
Note: I'm running Apache-1.3.31
So I
Odhiambo Washington wrote:
* Mike [EMAIL PROTECTED] [20040818 18:47]: wrote:
Greetings,
I'm running 4.10. And I just and ran portupgrade and got php-4.3.8. I
read the UPDATING file and noticed that the php4 extensions are now
installed separately [/usr/ports/lang/php4-extensions].
Note: I'm
Pratt, Benjamin E. wrote:
Bob -
Thanks for the info about finding the php-frontend on their site.
Do you have any information about the database question I had??
Nope, sorry, not from memory, i remember not having a lot of problems
setting it up, but i removed it a couple of monts ago, so i
On Wed, Aug 18, 2004 at 12:05:09PM -0400, Tyler Parrott wrote:
Hey all,
I'm currently trying to install X.Org onto my FreeBSD 4.10 machine but
am running into trouble. I followed the instructions in
/usr/ports/UPDATING but to no avail.
Basically, I deleted XFree and imake using
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of lily
Sent: Tuesday, August 17, 2004 9:34 PM
To: [EMAIL PROTECTED]
Subject: Config freebsd as getway
Dear all:
I have install freebsd 4.x,and have two netcards.
I want it as getway.
I have config
On Wednesday 18 August 2004 17:05, Tyler Parrott wrote:
Hey all,
I'm currently trying to install X.Org onto my FreeBSD 4.10 machine
but am running into trouble. I followed the instructions in
/usr/ports/UPDATING but to no avail.
Basically, I deleted XFree and imake using pkg_deinstall -f
Matthew Seaman wrote:
On Wed, Aug 18, 2004 at 08:46:58AM -0700, Mike wrote:
I'm running 4.10. And I just and ran portupgrade and got php-4.3.8. I
read the UPDATING file and noticed that the php4 extensions are now
installed separately [/usr/ports/lang/php4-extensions].
Note: I'm running
At 10:08 PM -0700 8/17/04, Kris Kennaway wrote:
On Tue, Aug 17, 2004 at 09:14:06PM -0700, Dennis George wrote:
Hi all,
Can I disable PROCFS (through kernel configuration[sysctl/GENERIC] )
in freeBSD
Yes. It's clear from the GENERIC config how to do this
(remove the entry)).
Is there
On Wed, 18 Aug 2004, Atanas Davarsky wrote:
Hi, i am Bulgaria from. I use FreeBsd about 2 years, and i am very
impressed.
After read in detail VPN over IPSEC from handbook, I can't find a solution
how to run VPN server if the remote clients are with dynamic ip adresses.
Thank you
You need
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ighor
Sent: Wednesday, August 18, 2004 4:18 AM
To: [EMAIL PROTECTED]
Subject: Intel PRO/1000 and Intel 865 PE, FreeBSD 5.2.1
Good day!
Sorry about my stupid questions, but i can't resolve my problem by
I am having issues with getting postgress extensions for php4
do you have to configure it via ports/compiling or can you get away
with with just pkg_dd -r
Iv'e tried
pkg_add -r apache
pkg_add -r mod_php4
and the ports way
cd /usr/ports/www/mod_php4
make
cd work/php-4.3.8
./configure
I am using postfix version 2.0.0.18 with tls and sasl2 on freebsd stable
4.9 using cyrus-sasl/saslauthd version 2.1.1.19 have configured the my
/user/local/lib/sasl2 dir to contain only
Sendmail.conf liblogin.so libplain.a libplain.so.2
liblogin.a liblogin.so.2 libplain.so
I ran a cvsup this morning and now when running a make index I get several
errors. I also am getting several errors when running a make search
key=mono |more
I figured I would just clean out the ports dir and start over. However I
don't want to go though and remove everyfile and ever dirrectory
I'm planning on making two partions for data found on /usr:
/usr2 which holds ports, src, and obj; and
/usrwhich holds everything else.
the /usr2 directories would be symlinked to /usr.
The reason I want to do this is because I have a different backup strategy
for the contents of /usr vs.
On 08/18/04 10:22 AM, Joshua Lewis sat at the `puter and typed:
I ran a cvsup this morning and now when running a make index I get several
errors. I also am getting several errors when running a make search
key=mono |more
I figured I would just clean out the ports dir and start over. However
Hi,
I'm sorry. I forgot to include this. I have an internal modem. And I'm
using FreeBSD 5.1.
There are only 2 cuaa devices in the /dev directory(cuaa1 and cuaa2).
Are my ports detected correctly or is it my modem that is not detected?,
- Ajesh
On Sun, 15 Aug 2004
Made a big mistake today. I was reading in a book that I needed to
install cvsup for doing updates. Good. So, I started installing it.
Meanwhile I began perusing the FreeBSD website information about cvsup
and there I read, if you not using a gui, then don't install cvsup, but
My FreeBSD server is on a mirrored pair of 160GB drives. I have been doing
partial backups by simply copying data and important config files to CD-RW,
but I wanted a way to back up the complete filesystem too, so I could
restore in case of disaster.
To that end I purchased a hard disk in an
On Wed, 18 Aug 2004, Terry wrote:
I'm planning on making two partions for data found on /usr:
/usr2 which holds ports, src, and obj; and
/usrwhich holds everything else.
the /usr2 directories would be symlinked to /usr.
The reason I want to do this is because I have a different
Curtis Vaughan wrote:
Made a big mistake today. I was reading in a book that I needed to
install cvsup for doing updates. Good. So, I started installing it.
Meanwhile I began perusing the FreeBSD website information about cvsup
and there I read, if you not using a gui, then don't install
man pkg_delete
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Curtis Vaughan
Sent: Wednesday, August 18, 2004 7:51 PM
To: [EMAIL PROTECTED]
Subject: cvsup install
Made a big mistake today. I was reading in a book that I needed to
install cvsup for
On Wed, 18 Aug 2004, Vince Hoffman wrote:
On Wed, 18 Aug 2004, Terry wrote:
I'm planning on making two partions for data found on /usr:
/usr2 which holds ports, src, and obj; and
/usrwhich holds everything else.
the /usr2 directories would be symlinked to /usr.
The
hi.
after i installed freebsd, i never able to boot in the console/terminal.
when my pc start to reboot, i see something like the following on my screen.
the machine reboots until i press the shut down button. Please help me out
with this. thank you very much.
Fatal trap 12: page fault while
I've been working on an old FreeBSD mail server that was configured by a
previous sysadmin. I've attempted to update the Courier-IMAP software, but
I can't figure out how to verify the installation. The system was very
poorly documented, and I want to be sure the server is actually running the
HTML Message - Winter Sports Pavilion Selling Out at ATE San Francisco
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Wed, 18 Aug 2004 12:45:03 -0400, Rail mail [EMAIL PROTECTED] wrote:
I am having issues with getting postgress extensions for php4
do you have to configure it via ports/compiling or can you get away
with with just pkg_dd -r
Iv'e tried
pkg_add -r apache
pkg_add -r mod_php4
and the
I'm planning on making two partions for data found on /usr:
Does this stretegy sound at all intelligent?
Yes, it sounds like a good plan for all the reasons you stated.
I'm planning on making /usr 4G, and /usr2 6G. Does that sound sane?
I'm running 5.2.1 with X, apache, samba, and 162 ports
On Wed, Aug 18, 2004 at 08:24:21PM -0700, Henrik W Lund wrote:
Curtis Vaughan wrote:
Made a big mistake today. I was reading in a book that I needed to
install cvsup for doing updates. Good. So, I started installing it.
Meanwhile I began perusing the FreeBSD website information about
I am having a problem connecting to my server. If I reboot it will work
externally for about 50 minutes. After that I can't connect. So I thought my
server turned off. Or my connection was closed. I was able to ping out so I
connected remotely and I couldn't ping the server. I shut down and it
Hi, I have a Gateway 920 server that I'm trying to load 4.10 on. I'm
seeing an error that I've never come across before. It looks like it
might in the processor flags, but I can't seem to find anyone with this
issue---except a few guys with the same model server. No one seems to
have the answer
Anyone get ntop totally working with FreeBSD 4.9? We can run it, but it's
flaky. On one FreeBSD box it runs fine for a while and then just dies. No
syslog messages. It's just gone. On another it won't display anything in the
Web interface (it opens new windows when clicking on some items), and it
I have this exact same problem with one of my boxes. Even completely
removing the app, getting a new current port skeleton and reinstalling --
still the same behavior.
Anybody got a solution?
Original Message:
-
From: adp [EMAIL PROTECTED]
Date: Wed, 18 Aug 2004 15:29:53 -0500
On Aug 18, 2004, at 4:37 PM, Grant Cooper wrote:
I am sure it is my ISP removing me from the routing table somehow or
my DHCP client is not refreshing but I'm not sure. Does anyone have
any ideas what I should do?
You should be sure of what you're sure of. :-)
You haven't said anything about
Vince Hoffman said:
Other than what you have already mentioned then no not realy. By the way
I (and i think it suggests in the handbook to) keep my kernel config in a
subdirectory of my home directory and just symlink it to
/usr/src/i386/conf as i have been know to blow away the entire
Hi :
I am trying to replace a sparcstation which has solaris 2.5, we use it
to boot some diskless pc's into MS-DOS 6.22 and mount a file system in
the disk C: of the pc with PC/TCP 4.1.
The boot process I had figured out, but the connection of the drive C:
to the file system is given me
I'm a little confused about using cvsup. I'm referring to 2 resources
(The Complete FreeBSD - 4th edition, and www,freebsd.org manual for
cvsup). BTW, I currently have FreeBSD 4.8 installed.
Ok, so, I know I need to edit a supfile and I have found all the
examples. But it seems to me that it
-Original Message-
From: John Cholewa [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 18, 2004 4:39 PM
To: Matt LaPlante
Subject: Re: Courier-IMAP Version?
Matt LaPlante wrote:
I've been working on an old FreeBSD mail server that was configured by a
previous sysadmin. I've
--On Wednesday, August 18, 2004 08:46:58 AM -0700 Mike
[EMAIL PROTECTED] wrote:
Greetings,
I'm running 4.10. And I just and ran portupgrade and got php-4.3.8. I
read the UPDATING file and noticed that the php4 extensions are now
installed separately [/usr/ports/lang/php4-extensions].
Did you
Jan Christian Meyer wrote:
If you still need to do shell stuff on startup, slapping
together a script and putting it in rc.d is the way to go.
The man pages of rc explain the works, and include a
template script which you can copy and fill in.
Wow! There's a lot there, in man rc. I'll play
Louis LeBlanc [EMAIL PROTECTED] writes:
Be careful with this one:
rm -rf whatever
Actually, _not_ getting into the habit of always using -f with -r is a
good plan.
___
[EMAIL PROTECTED] mailing list
I'm attempting to set up my first jail. This box acts as a firewall for
my network. It contains two network cards - one points to my internal
network and the other to the outside world.
I want to run SSH in a jail to allow SSH access from the outside world to
a controlled environment inside
On Tuesday, 17 August 2004 at 20:18:42 -0500, Sean Farley wrote:
On Wed, 18 Aug 2004, Greg 'groggy' Lehey wrote:
On Tuesday, 17 August 2004 at 11:13:17 -0500, Sean Farley wrote:
On Tue, 17 Aug 2004, Greg 'groggy' Lehey wrote:
This mouse has five buttons: the normal three on top, and one on
The first problem I'm having is that according to every jail tutorial I've
seen so far, I'm supposed to bind the IP address of the jail to a NIC.
Well... both of my NICs already have IP addresses bound to them, so ifconfig
always fails with ioctl (SIOCAIFADDR): File exists.
Okay, I figured
On Tuesday, 17 August 2004 at 15:23:41 +0200, Marc Fonvieille wrote:
On Tue, Aug 17, 2004 at 03:32:37PM +0300, Anton Alin-Adrian wrote:
Marc Fonvieille wrote:
I found this CANON Scanner Canon Lide30 USB available to be bought
It is supported under 4.10 and -CURRENT. I use it :) and I used
hi
I need top for 4.10 jails to work, and i know a lot of other people
would like it.
So i am looking for someone who like to develop a new patch for it (if
it doesn't already exist?) and then keep the patch up to date. we're
willing to pay and would of course want to release it back to the
At 8:24 PM -0500 8/18/04, george donnelly wrote:
I need top for 4.10 jails to work, and i know a lot of other people
would like it.
So i am looking for someone who like to develop a new patch for
it (if it doesn't already exist?) and then keep the patch up to
date. we're willing to pay and would
From: Greg 'groggy' Lehey
Can anybody recommend a good mouse? My criteria are:
- Middle button easy to use. The current crop of mice has the middle
button integrated with the roller, and that makes the middle button
either heavy or easy to confuse with the roller.
- Preferably
Made a big mistake today. I was reading in a book that I needed to
install cvsup for doing updates. Good. So, I started installing it.
Meanwhile I began perusing the FreeBSD website information about cvsup
and there I read, if you not using a gui, then don't install cvsup, but
Made a big mistake today. I was reading in a book that I needed to
install cvsup for doing updates. Good. So, I started installing it.
Meanwhile I began perusing the FreeBSD website information about cvsup
and there I read, if you not using a gui, then don't install cvsup, but
Garance A Drosihn [EMAIL PROTECTED] on 8/18/04 wrote:
I need top for 4.10 jails to work, and i know a lot of other people
would like it.
So i am looking for someone who like to develop a new patch for
it (if it doesn't already exist?) and then keep the patch up to
date. we're willing to pay and
Curtis Vaughan [EMAIL PROTECTED] on 8/17/04 wrote:
Or do I have to just uninstall all those packages individually? Is
there a way then to identify which packages were installed by
installing cvsup?
yes, that will work (pkg_delete)
to see dependancies
pkg_info -r subversion-1.0.6
Information
On Tuesday, 17 August 2004 at 11:38:33 -0400, Duane Winner wrote:
Hello,
Hey, does anybody know of any useful tricks for automating xtset or
xtermset?
I use xtset to set the title and icon labels to [EMAIL PROTECTED]:path so I can
keep track of my xterms littered all over my desktop (pretty
On Aug 17, 2004, at 6:14 PM, Greg 'groggy' Lehey wrote:
Root is the only one allowed to make hard links to directories.
This is not correct. root has no special powers here.
OK, I'm a bit out of date and stand corrected. IIRC fsck used link(2)
to reconnect an inode as a directory sometimes. man
Hi there
My freebsd box was working fine (resolving)
then I recompiled the kerneld
I just added scbus and da to get my digicam, working
then after reboot I can not resolv I think
when I try to cvsup it sits on PARSING FILE
I can not ssh to boxes in the LAN
but I can ping then
I can not ping
Glenn Dawson [EMAIL PROTECTED] on 8/18/04 wrote:
All you need to do to make it work is create /dev/kmem and /dev/mem
inside
the jail. (note, you have to create them from the base system)
You'll find the correct mknod command to use for each in /dev/MAKEDEV
-Glenn
thanks, but wouldn't this
1 - 100 of 110 matches
Mail list logo
