for about
$20 each. However, the Motorola catalog states that it is the same as the
2N5302 commercial part. The Mouser catalog lists the 2N5302G for just over
three bucks a pop. The G suffix means that the item is lead-free.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder
drawback was that the oven-stabilized time
base was not automatically synchronized with the frequency generating or
measuring circuits; you had to manually tweak the CAL knob to zero the error
meter before every reading.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder
seldom can hear the tone.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of nj902
Sent: Friday, December 12, 2008 1:16 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: MSF-5000 PL
It works fine for me. You might need a later version of Adobe Reader.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of buggyboy130au
Sent: Friday, December 12, 2008 4:22 AM
To: Repeater-Builder
Right you are! Go here:
www.com-spec.com/insheet/mitrek2.pdf
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chuck Kelsey
Sent: Sunday, December 14, 2008 6:09 PM
To: Repeater-Builder@yahoogroups.com
when needed and for as long as needed.
I use a Cantherm switch that Digi-Key sells under catalog number 317-1094-ND
for about $7.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chuck Kelsey
Sent
needed and for as long as needed.
I use a Cantherm switch that Digi-Key sells under catalog number 317-1094-ND
for about $7.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chuck Kelsey
Sent: Sunday
Jordan,
Have you considered using an audio delay? When properly applied, a delay
unit does a fine job of eliminating squelch crashes during the hang time.
Cheaper than the RLC-MOT, too.
73, Eric Lemmon WB6FLY
- Original Message -
From: twoway_tech jcar...@k9nzf.com mailto:jcarter
Arthur,
I don't have a copy of the manual, but I can advise you that the manual part
number is 68-81061A75, which may help you find a copy. Unfortunately, it is
NLA from Motorola Parts.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater
Tom,
The Mitrek coils are not the same as Micor coils. Not even close.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Tom Manning
Sent: Sunday, December 21, 2008 3:40 PM
To: Repeater-Builder
in the movie
was displaying 144.330 MHz! Geez- you'd think that someone on the movie
staff could do better than that...
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Albert
Sent: Sunday, December 21, 2008 4
screws may work, I suspect the Q will suffer.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Kevin Custer
Sent: Friday, December 19, 2008 9:30 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re
6882446W01, for about $17.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Craig W Clark
Sent: Thursday, December 18, 2008 11:36 AM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder
-band Mitrek
to 2m, so I have no idea what issues may arise.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Kevin Custer
Sent: Saturday, December 20, 2008 5:41 PM
To: Repeater-Builder@yahoogroups.com
the
NLE8912A version- the most common- which is designed to operate in the
450-470 MHz band.
The N1275A manual is still available from Motorola Parts. It is part number
6881020C85, and costs about $15.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
, not a duplexer. You probably meant DB4062, which is
a six-cavity VHF BpBr duplexer.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of pontotochs
Sent: Wednesday, December 17, 2008 2:04 PM
To: Repeater
But, most top-of-the-line commercial equipment that has been sold for the
last ten years is already programmable for narrow band. Perhaps you're
thinking about low-tier stuff, like the SM-50?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
Doug,
Part Number 19D416886G2 is the component board for the 19C320414G7 Power
Amplifier. This is an intermittent-duty, 65 watt Mastr II station PA for
150.8-174 MHz. The manual you need for this PA is LBI-30413. Alas, it is
not available on the RBTIP GE database.
73, Eric Lemmon WB6FLY
.
www.pacres.com
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Jed Barton
Sent: Wednesday, December 10, 2008 10:36 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Pacific research ri300 controllers
Hey guys
Jerry,
You should check the manuals available now for download right here:
www.repeater-builder.com/maxtrac/maxtrac-index.html
The complete GM300 service manual is available in five parts. Just scroll
down to the manual download section.
73, Eric Lemmon WB6FLY
-Original Message-
From
- or is it now
called pin 5? Don't worry about plugging a 16-pin connector in wrong,
because there is a positioning key that prevents mating unless the 16-socket
plug is centered on the 20 pin jack.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Joe
Sent: Saturday, November 29, 2008 12:53 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Motorola uhf VHF radius wide band or narrow
band
Does anyone
or the negative power lead as your logic
return.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Thomas Oliver
Sent: Sunday, November 30, 2008 7:06 AM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder
sideband noise from the PA. Some aftermarket PAs are
remarkably trashy, and a bandpass cavity can do wonders to improve the
station operation- especially if receiver desensing is being caused by
transmitter noise that falls on the receive frequency.
73, Eric Lemmon WB6FLY
-Original Message
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of kb9bpf
Sent: Saturday, November 29, 2008 1:30 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Need Maxar/Moxy power connector
Howdy all,
I need to find
, and it still is performing well. Your unit
probably has a malfunction- assuming somebody didn't tweak the pots before
it came into your hands.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Friday
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Friday, November 28, 2008 12:46 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Deviation limiter adjustment on VXR-5000U
tinkered with the wiring since it came out of the box. I guess that we must
never assume that the wiring shown in the service manuals is Gospel- but
Yaesu and Vertex manuals have a good (and deserved) reputation for accuracy.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater
, while a full-size BpBr
duplexer will not. Don't forget to use only double-shielded cable to
connect the duplexer to the TX and RX ports on the repeater.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Richard Bessey
not to miswire
the speaker, lest the fuse on the backplane blow. The factory cable is
worth having, because the jumper loop is a handy place to connect the SINAD
input of a service monitor for front-end or preselector tuning and
sensitivity checks.
73, Eric Lemmon WB6FLY
-Original Message
would not fully engage. The second unit
simply stopped working. The third and present unit works just fine, and
I've had it for at least four years now. It is the Yugo of SWR meters, but
it's cheap and it works adequately.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder
:
www.com-spec.com/narrow.htm
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Sunday, November 23, 2008 12:02 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Micor RX IF filters
The file in question likely requires a later version of Adobe Reader than
what is being used by those having problems. Simply download the latest
version of Reader, and it will work just fine. I have Adobe Acrobat 7.0,
and it opened the file with no errors.
73, Eric Lemmon WB6FLY
essentially the loop resistance of the feedline. If the antenna system ever
fails, re-perform this measurement to quickly determine if there is an open.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of wa5luy
Sent: Saturday
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of John Transue
Sent: Friday, November 21, 2008 10:37 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] MTR 2000
To help me determine whether the Motorola
station requires 28 VDC. Personally, I prefer
to use an integral AC power supply for reliability.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of John Transue
Sent: Saturday, November 22, 2008 2:48 PM
To: Repeater
graphics
house.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of aa4ji
Sent: Tuesday, November 18, 2008 5:52 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] VHF Engineering
I have two(2) full sets
original
application. The manual that covers this unit is LBI-4909. Product Code 72
has some information:
www.repeater-builder.com/ge/product-code-indexes/index-pc72-professional-72
-stations.pdf
or here:
http://tinyurl.com/5cthvd
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater
. For
technical support on cable lengths, contact them here:
www.dbspectra.com/WebSite/ContactUs.aspx
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of James Adkins
Sent: Sunday, November 16, 2008 3:08 PM
To: repeater-builder
Go here for the current info on the DB-4076 duplexer:
www.dbspectra.com/UserFiles/File/DB4076.pdf
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Ken Arck
Sent: Sunday, November 16, 2008 4:02 PM
To: Repeater
Ken,
All of the coaxial connectors that Sinclair uses on their products are made
by Delta Electronics:
http://www.deltarf.com/
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of vo1ken_2000
Sent: Friday, November 14
is
normal.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Dave Gomberg
Sent: Saturday, November 15, 2008 8:14 AM
To: Repeater-Builder@yahoogroups.com; Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder
Brian,
There are many R-100 owners who have discussed similar issues on the
Repeater-Builder list, and may be able to help you. Also, the complete
R-100 service manual- among other documents- is available for download from
the Repeater-Builder Technical Information Pages (RBTIP).
73, Eric
- 6881055C40, about $3
P100 UHF Maintenance Manual - 6881055C50, about $14
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Maire-Radios
Sent: Thursday, November 13, 2008 5:03 PM
To: Repeater-Builder@yahoogroups.com
each
M1107 is Part Number 4884411L07, $ 84.12 each
73, Eric Lemmon WB6FLY
--- On Mon, 11/10/08, Ian Miller [EMAIL PROTECTED]
mailto:va2ir%40securenet.net wrote:
From: Ian Miller [EMAIL PROTECTED] mailto:va2ir%40securenet.net
Subject: [Repeater-Builder] Motorola transistors
To: Repeater
will need
to be remanufactured at about 1/3 to 1/2 the cost of a new unit. You should
use a vector network analyzer, or at least a spectrum analyzer with tracking
generator and a return-loss bridge, to properly tune a circulator or
isolator.
73, Eric Lemmon WB6FLY
-Original Message-
From
, the latest version of an LBI
may not be applicable.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Ian Miller
Sent: Tuesday, November 11, 2008 10:48 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] GE
well-
although I wish it had a larger meter. More info is here:
www.repeater-builder.com/ge/lbi-library/lbi-3491e.pdf
www.repeater-builder.com/ge/lbi-library/lbi-4436.pdf
www.repeater-builder.com/ge/lbi-library/lbi-4454b.pdf
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater
on eBay are hawking
HT1250LS radios as HT1250 (using new stick-on labels) and bilking unwary
buyers. Perhaps the best course of action is to ignore any seller who will
not reveal the complete model and serial number of a radio he or she is
offering.
73, Eric Lemmon WB6FLY
-Original Message
Chuck,
I buy all of my antenna-mounting hardware from either Tessco or
McMaster-Carr, and I'm seldom disappointed. What, exactly, do you want?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Chuck Kelsey
Sent
an oddball mount for a side brace on a tower, and I spent a lot
of time trying to design it myself. I later found that Tessco already
offered a fixture that was perfect for the job.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED
? Most pager stations are designed as base stations, and
may need some additional filtering and shielding to function well as
repeaters.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of gervais fillion
Sent: Sunday
Neal,
The Broken Rock Mountain site is at 34-32-08.2 N and 93-26-01.7 W on the
NAD83 datum. It is a mile or so southeast of Joplin, Arkansas, in
Montgomery County, and at an elevation of about 400m AMSL. Cellular station
KNKN495 is at that location. There are over 200 licensees shown in the
, the Group Number often is vital
in identifying a module's frequency band, features, capabilities, and
options.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Gary
Sent: Monday, October 27, 2008 6:54 AM
To: Repeater-Builder
in
my area spent many months trying to convert the same model of radio into a
repeater, but could not avoid significant in-cabinet desense, He finally
used separate radios for RX and TX, with all power and signal lines
filtered, and got it to work.
73, Eric Lemmon WB6FLY
-Original Message
Mike,
Hamtronics offers a selection of programmable exciters and receivers, some
of which meet commercial specs. Go here:
www.hamtronics.com
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Mullarkey
Sent
George,
The MSR2000 manual specs the TLE2283B as variable between 45 and 100 watts.
You're taking a chance to run it below 45 watts, especially if it is feeding
a reactive load. The specs assume a stable 50 ohm load.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder
three feet long.
Just use the snapshot tool to select that portion, and now you have exactly
what you want. You can also save that selection as a separate PDF to send
to someone in an e-mail.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL
and is a
lightweight contender by comparison. Opinions vary...
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of georgiaskywarn
Sent: Wednesday, October 22, 2008 5:12 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder
for such parts.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Randy Brumback
Sent: Wednesday, October 22, 2008 7:11 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] N connector parts?
Does anyone
in
service, but have never seen the problem you describe.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Camilo So
Sent: Monday, October 20, 2008 6:09 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder
The UHF Depot Manual contains the schematics. Order 6881096E35. It costs
about $195. It is not available for download, since it is copyrighted and
still in print.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf
Negative. I do not perform testing for Motorola. You can send it to
Motorola yourself for testing and/or repair.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Camilo So
Sent: Monday, October 20, 2008 6:47 PM
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike DeWaele
Sent: Sunday, October 19, 2008 12:30 PM
To: Repeater-Builder
Subject: [Repeater-Builder] Ge mastr 2 link question
Hi All,
I'm having a problem linking two
frequency is the hum?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike DeWaele
Sent: Sunday, October 19, 2008 5:29 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Ge mastr 2 link question
the page at which the switch can be ordered.
Yes, you can wire two or more thermal switches in parallel, so that the fan
runs whenever any monitored device exceeds the temperature setting.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL
ID listed is ATE 9PLWS20R. I think the listed radio is what you have.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Glenn Little WB4UIV
Sent: Thursday, October 16, 2008 9:29 PM
To: Repeater Group
Subject
be posted somewhere in the
shack so that it can be verified from time to time, or when there is a
suspected problem with the antenna or feedline.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Cort Buffington
Sent: Thursday
WA,
There are two LBIs that will be useful. LBI-30201 includes the description
and schematic, here:
http://www.repeater-builder.com/ge/lbi-library/lbi-30201g.pdf
LBI-30199 includes the tuneup procedure, here:
http://www.repeater-builder.com/ge/lbi-library/lbi-30199d.pdf
73, Eric Lemmon WB6FLY
manual 6880901Z79
while it is still in print, about $5.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of John Transue
Sent: Wednesday, October 15, 2008 12:20 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE
-in- a feature that
is normally not available in aftermarket controllers.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of James Adkins
Sent: Monday, October 13, 2008 12:10 PM
To: repeater-builder
Subject: [Repeater-Builder
in long
before the radio gets hot enough to affect its health. I drilled and tapped
a couple of 4-40 holes, and mounted the switch with some heat-sink compound
under it to get good heat transfer.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto
give erroneous readings.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of w8wer
Sent: Sunday, October 12, 2008 6:01 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] GE M/N 4EF5A1 amplifier
We have
that are
frequency-specific and very expensive. It can't hurt to ask.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Paul Metzger
Sent: Sunday, October 12, 2008 8:21 AM
To: Repeater-Builder@yahoogroups.com
Subject
Jerry,
I believe that the Model 1965 was a special design, and not a production
item. Try contacting Sinclair Tech Support here:
[EMAIL PROTECTED]
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED
. A low-band (30-50 MHz) Mitrek will have a 1 in that
location. Be aware that some Mitrek models come in more than just two power
levels.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Randy
Sent: Wednesday, October
go dead when that single backup dies. My vote is to keep them
completely separate.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Chappy
Sent: Monday, October 06, 2008 3:44 PM
To: Repeater-Builder@yahoogroups.com
opinion, is rush to a conclusion simply because non-technical people want an
immediate answer. Tell 'em to wait!
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Besemer (WM4B)
Sent: Monday, October 06, 2008 7
Cheapo connectors which vendors claim to be Mil-Spec but in fact
are not produced by one of the four qualified manufacturers listed above.
Caveat Emptor!
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Gary Glaenzer
Sent
the
isolator can handle: A indicates 15 watts, AA indicates 30 watts, and B
indicates 60 watts.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Sunday, October 05, 2008 11:38 AM
To: Repeater Builder
characters might be different.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of skydiver297
Sent: Sunday, October 05, 2008 2:02 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] R1225 Radio
Just received
low and which passes high.
Use a spectrum analyzer to determine which cans pass low and which pass
high, and mark them accordingly.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Besemer (WM4B)
Sent: Sunday
6880905Z53.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Randy
Sent: Saturday, October 04, 2008 6:48 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Radius R1225
http://www.wiscomm.com
as the Decibel Products water heater duplexer that uses four
cavities, each about 11 in diameter and five feet tall.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Chuck Kelsey
Sent: Thursday, October 02, 2008 5:07 PM
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Merrill
Sent: Wednesday, October 01, 2008 7:41 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] tld 2602a
What is the min and max drive needed on a tld
device
that is a low-tier machine for very modest applications, on a par with the
Kenwood TKR-x50 or the Motorola RKR-1225.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Jed Barton
Sent: Monday, September 29, 2008 5
the offending station, to
see if you can find a null in the back pattern while still receiving the
desired signal. You might also experiment with other directional antennas
that have superior side-lobe rejection and high front-to-back ratios, such
as a corner reflector.
73, Eric Lemmon WB6FLY
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Besemer (WM4B)
Sent: Saturday, September 27, 2008 8:12 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Quarter Wave Stubs/Notching Interference
I'm
Will,
The tuneup instructions for the UHF PLL exciter are in LBI-31209, here:
www.repeater-builder.com/ge/lbi-library/lbi-31209g.pdf
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of kb4ptj
Sent: Saturday
I erred in stating the tuning instructions are in LBI-31209; you need to
have that manual, but LBI-30200 is also needed:
www.repeater-builder.com/ge/lbi-library/lbi-30200e.pdf
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED
that model
number is that it is a 100 watt, continuous-duty VHF repeater station, but
I cannot tell which split (132-142, 142-150.8, 150.8-162, or 162-174 MHz) it
is built for until I look at the modules installed in the station.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder
the proper level.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of n9wys
Sent: Sunday, September 21, 2008 9:04 AM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Update on the MICOR Community
I agree. It's probably the PURC5000 Link Receiver option C659 to C663, or
C850. The manual 6881064E10 is still available from Motorola Parts for
about $17.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Milt
shipping charges...
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Gary
Sent: Saturday, September 20, 2008 2:32 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Power Supply
Folks,
I'm in need
the diodes in less than a minute, but the job can also be
done with a large bench vise and a couple of sockets.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of kk2ed
Sent: Thursday, September 18, 2008 9:49 PM
To: Repeater
along one
edge of the PC board itself, not on sheet metal parts.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of n9wys
Sent: Saturday, September 20, 2008 7:33 PM
To: Repeater-Builder@yahoogroups.com
Subject
.
When I looked up the 1-80739B57 diodes, I found them to be NLA, but the
description is BD EYLTD. That doesn't make much sense, unless the diodes
were offered only as an assembly.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED
, such a small
generator probably could not even handle the refrigerator's starting
current- which is about 5 to 6 times its running current.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Albert
Sent: Tuesday, September 16
is geared to a
register that accumulates the number of rotations, which represents power
over time, which is energy. Thus, the meter measures kilowatthours. You
pay only for the true power that you actually use; you do not pay for
apparent power since volt-amperes is not true power.
73, Eric Lemmon
Perhaps it's better to set your mail program to put your reply at the top,
with all posts following in descending order. That is the Outlook default
setting, and it works for me!
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED
601 - 700 of 1837 matches
Mail list logo
