for PSK.
Now one manually changes the power levels when changing VFOs. Now, each VFO
uses the last power level set for either VFO, requiring an adjustment for
QRP, digital and SSB. Just a thought for a helpful future upgrade if
possible. Ron KM4VX
--
View this message in context:
http://elecraft
FS: KX3, PX3, KXPA100, KXAT100 SETUP, plus KX3 and PX3 Nifty Desk Stands and
PX3 Nifty Mini-Manual. Includes all manuals and cables that came with
equipment. Purchased new factory assembled July 2015. 36 QSOs to date.
Everything in excellent to mint condition; works perfectly or complete
refund.
FS: KX3, PX3, KXPA100, KAT100 SETUP, plus KX3 and PX3 Nifty Desk Stands and
PX3 Nifty Mini-Manual. Includes all manuals and cables that came with
equipment. Purchased new factory assembled July 2015. 36 QSOs to date.
Everything in excellent to mint condition; works perfectly or complete
FS: KX3, PX3, KXPA100, KXPAT100 SETUP, plus KX3 and PX3 Nifty Desk Stands
and PX3 Nifty Mini-Manual. Includes all manuals and cables that came with
equipment. Purchased new factory assembled July 2015. 36 QSOs to date.
Everything in excellent to mint condition; works perfectly or complete
when not in use. Pls reply off-line ronce...@outlook.com. Will throw in
Caddy books for K3,P3 etc. View on QRZ.com for KM4VX.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FS-K3-P3-KPA500-KAT500-PKG-tp7611410.html
Sent from the Elecraft mailing list archive at Nabble.com
I am leaving the hobby and selling my one owner KX3 PX3 and KXPA100AT;
boredom and lousy propagation. All factory assembled and purchased in July
2015. In mint condition. Original cost was $3.094.00 plus $140.00 for KXPD3
paddle and $65.00 for two stands for KX3 and PX3. Invested $3,300 in July;
I am no longer offering this setup for sale. I have decided to keep the
entire KX3 and K3 setups. Rather than adding the K3s I have added the Icom
7600 just for a little variety. Thank you for the offers to buy the KX3.
Great little radio. 73. Ron KM4VX
--
View this message in context:
http
I purchased this setup in July 2015. I am the original owner. Includes KX3-F,
KXBC3-F, KXFL3-F, KX3-PCKT, KXPA100-AT-F, KXPACBL, KXSER-a, MH3, PX3-F and
KXPD3 key for KX3. All factory assembled. This is my second KX3 setup and I
now know without a doubt now after two failures that I prefer the
CORRECTION: CORRECTION: I purchased this setup in July 2015. I am the
original owner. Includes KX3-F, KXBC3-F, KXFL3-F, KX3-PCKT, KXPA100-AT-F,
KXPACBL, KXSER-a, MH3, PX3-F and KXPD3 key for KX3. All factory assembled.
This is my second KX3 setup and I now know that I prefer the larger K3
radio.
I purchased this setup in July 2015, yes last month. I am the original owner.
Includes KX3-F, KXBC3-F, KXFL3-F, KX3-PCKT, KXPA100-AT-F, KXPACBL, KXSER-a,
MH3, PX3-F and KXPD3 key for KX3. This is my second KX3 setup and I now know
without a doubt after two tests that I prefer the larger K3 radio.
I purchased this setup in July 2015. I am the original owner. Includes KX3-F,
KXBC3-F, KXFL3-F, KX3-PCKT, KXPA100-AT-F, KXPACBL, KXSER-a, MH3, PX3-F and
KXPD3 key for KX3. This is my second KX3 setup and I now know without a
doubt that I prefer the K3 larger radio. I have not opened the KX3;never
are
interested in the night sky and can stay awake long enough to enjoy it
please contact me off-line. Thanks. Ron KM4VX (910) 793-9043
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Trade-Offer-tp7606145.html
Sent from the Elecraft mailing list archive at Nabble.com
My experience with Ham insurance is that your Homeowners policy will cover
you for all damages to your equipment provided the incident occurs when
operating from home. I collected $8,000.00 on a lightning strike several
years ago, all on my homeowners policy and the claim was settled quickly and
My experience with Ham insurance is that your Homeowners policy will cover
you for all damages to your equipment provided the incident occurs when
operating from home. I collected $8,000.00 on a lightning strike several
years ago, all on my homeowners policy and the claim was settled quickly and
not require
the fan, but at 5 watts the fan is adequate. The radio gets warms, but does
not overheat. My KX3 came with the latest heat sink from ElecraftI, have not
performed the temperature compensation mod, and will not be buying any
after-market heat sink. 73 Ron KM4VX
--
View this message in context
if anyone has found a firmware or software answer to the over heating
problem. The overheating problem happens regularly in digital modes and I
believe comments about the KX3 working correctly in digital are simply
incorrect. This is not an antenna issue and not an SWR issue. Thanks Ron
KM4VX
--
View
Lyle: Thank you. My KX3 was purchased last week so I am confident it has the
new heat sink. I have adjusted WSPR to 3 watts and it works. Since the radio
does warm up I am going to use a computer fan to aid the heat sink. I
believe Elecraft should have upgraded to a better heat sink. I do not
. SELLING BECAUSE K2 RARELY USED (MOSTLY ON WSPR AT 5
WATTS) AND I HAVE A K3 WITH HOPES OF PURCHASING A K3S/P3 SOON. PHOTO ON
QRZ.COM FOR KM4VX IS K2 FOR SALE.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KK2-FS-REDUED-PRICE-tp7604609.html
Sent from the Elecraft mailing
K2 RARELY USED (MOSTLY ON WSPR AT 5 WATTS) AND I HAVE A K3 WITH
HOPES OF PURCHASING A K3S SOON. PHOTO ON QRZ.COM FOR KM4VX IS K2 FOR SALE.
PLS REPLY OFF-LINE ronce...@outlook.com OR (910) 793-9043. THANKS AND 73.
RON KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2
K2 RARELY USED (MOSTLY ON WSPR AT 5 WATTS) AND I HAVE A K3 WITH
HOPES OF PURCHASING A K3S SOON. PHOTO ON QRZ.COM FOR KM4VX IS K2 FOR SALE.
PLS REPLY OFF-LINE ronce...@outlook.com OR (910) 793-9043. THANKS AND 73.
RON KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com
I think the problem was a loose connector cable via the KAT500 It is working
now so that must have been my error. I find most problems almost always
operator error. Sometime finding the solution takes hours even days!
--
View this message in context:
is a constant 0, never changes when sending CW or idle. I am operating
on 220 and it has worked fine to date. I wonder if I have inadvertently
changed some parameter. Any help would be appreciated. I reset the KPA500 to
default values. Thanks Ron KM4VX
--
View this message in context:
http
with the higher bands. My KX3 tunes this same 40 meter dipole through the
KXPA100 with no problem. It must be something in the KAT500. Anyone else
having this problem? Is this a problem with V1.67? Thanks Ron KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT500
Thank you for the replies. The coax provided by Elecraft is good, but I had
it twisted around other cables when connected between the K3 IF output and
the P3 IF input. I disconnected the cable from the P3, rerouted it from the
K3 so as not to wrap around numerous other cables, and the troublesome
I have noticed that my P3 displays a solid carrier 6khz below the frequency
to which I am listening. When I tune to the frequency there is no sound but
a solid carrier on the waterfall and a good spike on the screen, although no
audible signal. This appears consistent on every band, a spike
($125.00) game type speakers I have tried manage to raise the volume level
of the signal from the I/Q output so one can comfortably hear anything.
Ron KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-Extremely-Low-Output-Level-tp7574761.html
Sent from
Thanks to all for the interesting ideas. I am now using the KX3 I/Q output to
my PC line in (works equally well to mic input in rear) and the simple NaP3
software. Works great for panadapter and controlling the rig. I have ordered
the inexpensive iMic soundcard to see if there will be any
Must be some interest in the topic!! I have a line connected from the I/Q
output of the KX3 (with the menu ON) into my PC sound card, line in. Nothing
happens using the HDSDR software on the waterfall although I can control the
KX3. Not receiving signals, just noise. Question: What sound cards
Hello Joe: I also have 1.48 and no problem changing the time. You may want to
try using the KX3 Utility to set the time; can do that in configuration
mode. I also like option of reverting to previous software load and then
re-loading the new software. Just a thought from a novice. 73. Ron
--
Eric has posed a question regarding the source of the rumor about the
development of an adapter to use the P3 with the KX3. In the spirit of full
disclosure I quote the following from the Elecraft archives:
Not so. We also plan to offer a small IQ to P3 adapter for the KX3, which
will
give
Great to hear a KX3 amplifier will soon be available from Elecraft. I have
no interest in adding power to my KX3 QRP rig, but I am looking forward to
Elecraft selling the adapater so we can use the KX3 with the P3. I hope in
the rush to get the amplifier to market Elecraft has not forgotten its
Good to see the KX3 accessory amp and tuner will soon be available. I am more
interested in the adapter planned for using the KX3 with a P3, since I find
the panadapter scope very useful in checking band conditions and basically
just lots of fun. Any information on when this adapter for the KX3
am
confident Elecraft recognizes Don as their senior Ambassador to the
undeveloped-Elecraft territories here on the East Coast. Ron KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Don-Wilhelm-A-Special-Thank-You-tp7571992p7572035.html
Sent from the Elecraft mailing
for those of us not planning to ham while mountain climbing, skiiing
or scuba diving etc. Thanks. Ron KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-POWER-ON-OFF-OPTION-tp7568770.html
Sent from the Elecraft mailing list archive at Nabble.com
I think we need further clarification. Tapping the ATU TUNE button on the
K3 just toggles between BYPASS and ATU. It does not force the KAT500 to
tune. Do you mean we should HOLD the XMIT button on the K3 to force the
KAT500 to tune or should we HOLD the ATU TUNE button on the K3 to force the
I get it. You HOLD the XMIT button on the K3 to tune the KAT500 and no need
to press TUNE on the KAT500 and then a button on the K3. You don't TAP the
ATU TUNE button when in BYPASS mode with the ATU installed (if using the
KAT500) because nothing happens except the screen reminds that you are in
? It is not possible to manually adjust the KAT3 in the K3 while applying
power. Looking forward to previewing the KAT500 manual. 73 Ron KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT500-and-W2-tp7560548.html
Sent from the Elecraft mailing list archive
Elecraft products; no need to defend what is not under attack. Elecraft
fans must have an excessive amount of time on their hands!! Ron KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT500-tp7559586p7559666.html
Sent from the Elecraft mailing list archive
products delayed for whatever reason. I know the folks at
Elecraft are busy; no one is THAT busy. 73 Ron KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT500-tp7559586p7559622.html
Sent from the Elecraft mailing list archive at Nabble.com
.
Elecraft has had nothing to say about the KAT500 since March, except to
repeat in April their plans to launch the KAT500 this summer. I look forward
to an update in the near future. Many thanks. KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT500-tp7559586.html
Sent
Bruce: I know and there is stuff on YouTube, but that is quite different from
a photo on Elecraft promoting the product. I cancelled KX3 because by the time
I got it the technology would be vintage; I have high hopes the KAT500 will
surface this year. Ron
Date: Sat, 21 Jul 2012 12:11:10
I like the Elecraft products and also have several of their radios/meters/amp
etc. However, I still find the marketing unsatisfactory and the hype over their
products unjustified; the reflector serves to keep the prices inflated and
promotes the products using the customers as unpaid salesmen.
I acquired a 144-450 MHz directional coupler for the W2 in a trade. It is the
DCV/U-200a 144-450 MHz 200w coupler selling for $99.95 new. It is excess to
my needs. I tested it and it works perfectly. I will sell it for $55.00
shipped to lower 48; basically you save 50 percent if you can use it.
The coupler is no longer available. Thanks for your interest. 73. Ron
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FS-W2-144-450-MHz-Coupler-tp7558713p7558758.html
Sent from the Elecraft mailing list archive at Nabble.com.
. Ron
KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FS-K2-XV50-Transverter-tp7558116.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net
The XV50 is no longer available. Thank you. Ron KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FS-K2-XV50-Transverter-tp7558116p7558139.html
Sent from the Elecraft mailing list archive at Nabble.com
Thank you for your interest. The Unit is no longer available. 73. Ron KM4VX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-KAT100-and-KPA100-in-EC2-For-Sale-tp7557817p7557883.html
Sent from the Elecraft mailing list archive at Nabble.com
I have a KAT100 and KPA100 for sale. Both enclosed in the EC2 enclosure and
in perfect condition. Work without issues with my K2, but I only use the K2
at low power, and do not need the amplifier/tuner. I purchased both from a
ham/builder in December 2011 for $750.00. Will sell shipped/insured
The KTA500 Advance Order Form does NOT exist, but I suspect the title of this
message attracts some interest. Is Elecraft ready to post an Advance order
Form for the KAT500 as was the case with the KX3? Thank you, and please
e-mail me the first KAT500 Advance Order Form in gratitude for my
I have a K2/10 connected to a KAT100 and KPA100, both enclosed in the
external EC2 enclosure. Works great, thanks to Don in Wake Forest. I just
acquired a used XV 50 and have been trying to connect it to my K2 setup. I
can't figure out how to connect the antenna output from the transverter to
my 6
have it set up correctly, the band switch will select 6 meters,
the XV50 will turn on and you can TX/RX just like on the HF bands, but
using the antenna that is connected to the XV50.
73,
Don W3FPR
On 3/2/2012 7:28 PM, KM4VX wrote:
I have a K2/10 connected to a KAT100 and KPA100, both
Will the P3SVGA be capable of direct connection to a monitor separate from
the computer monitor that might be enabled for other uses with the K3? For
my purposes if I am going to use a larger screen (may or may not be useful)
I would want it to be a dedicated monitor that does not interfere with
Many thanks for the helpful suggestions on and off-line. Given all the
problems with Serial to USB adapters I am going to install serial PCI cards
in my PC and then connect the correctly wired cable from the K2 (I
understand it is not a true RS232 port on the K2) to a new serial port on
the PC.
I installed a Manhattan dual port serial PCI card in my W7 64 bit PC built by
local guys still too young to shave. Both the K2 (with a modified cable) and
the K3 (direct 232 cable)) working great into the serial ports. Given the
problem with USB adapters sometimes working, then failing etc this
I have both my K2 and K3 connected via serial to USB cables, but I cannot
get the computer to recognize the K2. The K3 is connected via the Elecraft
serial to USB cable and works fine. The K2 uses a serial to USB adapter, but
the computer refuses to recognize the K2 adapter and insists on going
If anyone has a working XV50 module which is now excess to their needs I am
interested in adding it to my K2 setup. Please contact me off-line with
asking price and condition. Thanks. Ron
--
View this message in context:
Any update on when the KAT500 will be available? I see on the reflector it
was projected for release last summer. I don't think asking the question
again now in Jan 2012 is inappropriate. There is a lot of interest among the
non-resonat antenna Elecraft community. Any information would be
I have the P3 factory assembled For Sale. It is a wonderful colorful addition
to my shack, but it is also useless to me. I can find no practical use for
the P3, and it just occupies space in my shack. I am the original owner and
it is in pristine condition. Insured and shipped to your door in
Thank you for the numerous reponses. The K2 and the P3 have been sold. See
you on the air with my other K/2 and my K3. Great products.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-and-K2-SOLD-tp5998606p5998606.html
Sent from the Elecraft mailing list archive at
I have two K2/10 and a K/3. I would like to sell one of my K/2. The one for
sale has the following options: KSB2, KNB2, KAT2, K160RX, KIO2, KAF2 as well
as the Elecraft USB cable for computer control. It basically has everything
but the battery pack and 5 meter module, which my other K2 has. The
My K2/10 (#6255) has suddenly lost any receive capability on 40 meters. It
transmits on all bands including 40 meters but hears nothing on 40. I have
done the simple checks in changing coax and antenna inputs with no change. I
have a second K2 for comparison, but lacking any lab equipment here
I want to thank those of you who responded to my problem, and in particular
Don (W3FPR) who once again demonstrated his knowledge of the K2 and his
willingness to generously share his time and talent. The problem was in the
secondary menu. The D19 parameter was y and since no K60XV is installed
Is there a real fix in the works for the problems associated with updating K3
and/or P3 firmware/software? The present solution of having to physically
disconnect the K3 and P3 is an absurd solution for those who have their
equipment installed in cabinets etc. I look forward to a fix in keeping
I am trying to understand what these terms mean, and having read the related
posts still can't figure out what they mean or what settings to use. I want
the P3 to reflect cw signals and sometimes ssb signals within a given span
(say plus and minus 75). I have no idea what the db signals to he
While praising the support from ELECRAFT (more the support from the Reflector
members), I have to say a public thank you to Carl, N4PY, for the support he
provides for his N4PY control software. I am using his software on my K2 and
K3. Carl could not have been more helpful in the setup process,
I always enjoy the Reflector coments, educational and occasionally funny. I
own the K-2, K-3 and PRO 111. This site is great PR for Elecraft, but we
should remember that their expensive wattmeter is inaccurate to the extreme
although pretty, and the P3 (in my opinion anyway) appears to be pure
I use the Heil CC1 K cable and a Heil mic for my K3, and it works fine. I
tried the same CC1 K cable and Mic on the K2 and it does not work. I assume
the Kenwood mic configuration for the K3 is correct but that is not true for
the K2. Correct? I have the Elecraft MH2 hand mic for the K2 and it
Thank you Gary and Bob. I now understand using the menu for the K3 to turn
bias on and off. Makes sense. I would not want to change the configuration
of the mic socket in the K2 radio, which would then limit the use of mics
and eliminate the use of the Elecraft mics. I could change the wiring of
What drives the price of a new product more than anything is marketing.
Microsoft could sell Windows 7 at profit for 50 cents but charges $149.00.
The P-3 price is being defined here on the reflector by those of us who are
so enthusiastic about Elecraft; hams may be called cheap but have
, I will buy the P3. Cost? It is not so high that it would be
totally unreasonable I am betting.
73, phil, K7PEH
On Feb 13, 2010, at 8:23 AM, KM4VX wrote:
What drives the price of a new product more than anything is marketing.
Microsoft could sell Windows 7 at profit for 50 cents
Harry: Let's keep the exchange civil. There is nothing silly about my views
or those you put forward. You demonstrate the success of good marketing by
both Microsoft and Elecraft. I am not taking anything away from either, but
this is about marketing not technology. Most of these companies
The P3 looks and appears to act much like the excellent screen which is
integrated into my IC 756 PRO 3. Since we like the K3 so much Elecraft
decided to compete with a separate panadapter like the P3, rather than a
K4. I think the LP-PAN kit for $175.00, with free software connected to a
I have found that by downloading the K3_EZ program several times ( hopefully
as administrator ) the memories are now being retained, although the program
freezes upon closing. I like K3_EZ better than the other software out there,
primarily because of the band stacking on 60 meters and the memory
I see many people have the same problem with K3EZ; the program loses
frequency memory on the computer after shutdown. I know several people have
asked Elecraft to develop a program so that the computer would control
memories on K-3, but that is a different issue. I am addressing the problem
of
I sent him a msg weeks ago and have not received a reply. Not his problem and
I am in no way criticizing him.
- Original Message -
From: Radio Amateur N5GE [via Elecraft]
To: KM4VX
Sent: 2/10/2010 10:43:05 AM
Subject: Re: K3EZ Program fails to retain memories on computer
On Wed
K-3 selling on E-Bay 6 Feb (Item # 300394149258) fully loaded with all
filters main and sub-receiver and EVERYTHING else with BUY NOW price of
$1,600.00 and 12 bids to $1,200.00. I reported this obvious hacked scam ad
to E-Bay and the Ad disappeared within an hour this morning. I love a good
deal
I see the question has been asked but not really answered. Is there an
adapter that would allow one to plug the 8 pin mic plug from a desk mic into
the rear mic 3.5mm input socket? I have a new K-3 and a 4-pin xlr desk mic
with the Kenwood 8 pin plug cable on the other end for use with Elecraft
I realize this topic is not new, but it is confusing to review the archives
when searching this question. The KUSB is sold to support the K3. It is not
advertised to support the K2. Can it be used out of the box to support the
K2? Can I plug it into the serial port of the K2 (okay not a real
I use a new computer with Windows 7 64 bit and the EZ control software is not
working for me. It reads the radio fine but loses all frequency memories on
the computer after logging off The frequencies all read but the modes
remain correct. Also, the EZ software freezes when trying to log
Although I love my K2, which I am keeping, I now have a K3 on the air today.
Fantastic rig. I may even get a chance to operate once I configure this
amazing radio. I am trying the new K3 EZ software for following what I am
doing in setting up the radio. I see from the reflector that there have
Thank you for the replies. I have discovered the difference between semi
break-in delay, which is controlled by the delay knob on the radio, and the
TX DLY feature in the configuration menu. I use semi break-in and have now
reset that higher using the knob on the radio vice the menu feature.. I
This is an obvious scam and it happens daily. Information that it comes from
Nigeria just confirms this. There are no honest e-mails from Nigerians;
believe it. I don't understand why these e-mails from the the Ukraine and
Nigeria continue, but they must enjoy some success. They are usually
Criticism often has consequences. Immediately after my posting on Nigerian
scams the computer I was using was hit by a major virus and the passowrd
corrupted. I cannot log on and must assume my identity etc has been
compromised. I have plenty of computers and will have the infected one
repaired.
I checked with the person selling the K-2 who says he has both the KDSP2 and
KAF2 installed in one K-2 and told him it is impossible. He said he is the
original owner of the radio, had both installed by ELECRAFT and has the
invoice to prove it. I told him to ask for a refund, since both cannot
of the latest meters, but the absence of increased accuracy over what
comes with the radio anyway is more important. The expertise available on
this Reflector is unmatched in the hobby.
KM4VX wrote:
W2 WATTMETER I was doing some research and considering buying the Elecraft
W2 for use with my 2 K
W2 WATTMETER I was doing some research and considering buying the Elecraft W2
for use with my 2 K-2s and read the very negative reviews of the W2's
accuracy on E-Ham. I wonder if anyone would care to refute the E-HAM reviews
or offer positive comments about the W2's accuracy. At this point I
Thank you Dave for the information. I had accidently put the radio into
TEST mode. I think the learning curve with this wonderful radio probably
exceeds the life expectancy of many Hams, this one included.
KM4VX wrote:
My AT has suddenly started showing LO PO after displaying the SWR
Thanks Don. Per Dave I must have been in the TEST mode and when I got out of
the TEST mode the LO PO message disappeared.
- Original Message -
From: Don Wilhelm-4 [via Elecraft]
To: KM4VX
Sent: 10/20/2009 12:20:41 PM
Subject: Re: K2-- Auto Tuner Issue
That message says the K2
My AT has suddenly started showing LO PO after displaying the SWR on all
bands when the TUNE button is pressed. I have the AT set to AUTO and even
when manually increasing the power I still get the LO PO display after the
K2 displays the SWR. Changing antennas has no effect. Ths is K2 serial
I have searched the archives but cannot find anything concerning how to
monitor the outgoing PSK31 signal from the K2. In the PRO3 one just pushes
the Monitor button. I am using the SignaLink USB interface with Digipan
software at 5 watts. I would like to check my outgoing audio. Thanks. Ron
--
for
everyone.
KM4VX wrote:
I have searched the archives but cannot find anything concerning how to
monitor the outgoing PSK31 signal from the K2. In the PRO3 one just pushes
the Monitor button. I am using the SignaLink USB interface with Digipan
software at 5 watts. I would like to check my outgoing
I have a one day old LP-PAN Panadapter from Telepostinc configured for the
K-2 For Sale. It was factory assembled and arrived yesterday (Friday). I
paid $235.00 shipped. You can have it in original double box shipped with
everything for $180.00. I am selling because it would take a miracle to
The LP-PAN Panadapter I offered for sale this morning sold immediately.
Thanks for your interest. Long Live the K-2.
--
View this message in context:
http://n2.nabble.com/K-2-Pan-Adapter-tp3587724p3587724.html
Sent from the Elecraft mailing list archive at Nabble.com.
anything further and is a delight to
operate. I haven't found any use for the installed Z1 as yet. Ron KM4VX
- Original Message -
From: Don Wilhelm-4 (via Nabble)
To: KM4VX
Sent: 8/15/2009 8:54:56 AM
Subject: Re: [Elecraft] K-2 and Panadaptor
Ron,
Yes, LP-PAN is available
I have a second K-2 with the Z1 buffer installed and intended for use
with a panadaptor. (I hope this is the correct term. LP-PAN?) I have never
used this particular option, but am familiar with the scope in the IC 756
PRO 111 which is superb. I wonder if the panadaptor Elecraft is
be interesting to have that information posted here. I would find a
separate amplifier unit more convenient than an internal upgrade to the K-2.
Thanks. KM4VX
--
View this message in context:
http://n2.nabble.com/Amplifier-for-K-2-10-tp3129848p3129848.html
Sent from the Elecraft mailing list
I started the thread a few days ago as my first posting on the Elecraft
Reflector and didn't appreciate the number of opthamologist hams using
Elecraft. Thanks for the many inputs and it appears impractical to try and
change the display. Personally, I find either green or orange as a
background
97 matches
Mail list logo