2.7.15
Is it worth upgrading to 2.8? I tend to use what "just works". Monday will
be the real test when we put it back into production.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
-Original Message-----
From: Jeff Johnson [mailto:john...@superiorr
the
NML_Main_Channel_List.
(time=1674917589.857471,pid=1975): Deleting emcCommand NML channel from
NML_Main_Channel_List.
(time=1674917589.857480,pid=1975): deleting NML (1)
(time=1674917589.857488,pid=1975): delete (CMS *) 0x95591e8;
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734
EL): ./12mogmoccapymaster.hal
> ./12mogmoccapymaster.hal:3: Can't find module 'probe_parport' in
> /usr/realtime-2.6.32-122-rtai/modules/linuxcnc
> Shutting down and cleaning up LinuxCNC...
>
>
&g
(connection_socket = 3).
iocontrol: machine: '12MO' version 'unknown'
Found file(REL): ./12mogmoccapymaster.hal
./12mogmoccapymaster.hal:3: Can't find module 'probe_parport' in
/usr/realtime-2.6.32-122-rtai/modules/linuxcnc
Shutting down and cleaning up LinuxCNC...
Jeff Johnson
john...@superiorroll.com
Superior
. Not free but effective.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
*
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Ok.Thanks guys I see there are simpler ways to go now.
I'm a machinist forced into being a control guy at times.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
___
Emc-users mailing list
Emc-u
e sure links are safe.
> On 20 Feb 2020, at 14:25, Jeff Johnson mailto:john...@superiorroll.com> > wrote:
>
>
> Any thoughts or ideas on the best way to pull this off? PC? RPi4? Which
Why not add a 4th axis configuration to each machine that might use it? Then
you can properl
Todd,
Oops, flawed memory. The application is called schedrmt, emcsched is the main
module. The description for how it is supposed to work is in the comments of
schedrmt.cc.
Regards,
Eric
On December 2, 2019 6:50:17 PM EST, "Eric H. Johnson"
wrote:
>Todd,
>
>I wrote so
Todd,
I wrote something along those lines years ago, and still exists in the source
code. It is called emcsched. I wrote it for a jewelry application that did lots
of small parts. It basically lets you put a job in queue, pick a starting
point, feed rate, etc. and runs the jobs in the order in
John,
I have not touched Lazarus in couple years, but really liked it has a cross
platform rapid development tool.
How are you connecting to Linuxcnc remotely? Are you familiar with the
linuxcncrsh and halrmt interfaces?
Regards,
Eric
On September 23, 2019 1:56:41 AM EDT, John Dammeyer
eld
hostage? Maybe, but
there is the possibility that I can migrate to one system over time. My real
needs are the ability
to make and open 2D drawings as well as solids and generate trouble free
tool paths.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
One
and updates do get cumbersome.
I am worried about moving to the cloud based system but I guess it's the
future.
What are this groups thoughts if any?
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
___
, "Peter C. Wallace" <p...@mesanet.com>
wrote:
>On Thu, 8 Feb 2018, Eric H. Johnson wrote:
>
>> Date: Thu, 8 Feb 2018 11:51:24 -0500
>> From: Eric H. Johnson <ejohn...@camalytics.com>
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
Peter,
Voltage to the card is 4.97V. The cable length is 2'. I had a spare, but the
same length. Swapped anyway and getting basically the same thing. A PITA
because it usually takes 1-3 hours for the error to occur after a cold
start. I am not seeing anything shorter than 3' on the Mesa Price
All,
I have three machines at the same facility, all basically X/Y tables with an
ultrasonic knife as the tool. In all cases the Z axis is controlled by M64 /
M65 digital outputs. One machine however, has an additional high high air
cylinder. This is on the largest table which is 15' x 30'.
All,
Just this week I started getting TRAM errors on a machine that has been
running for years. This system uses the Mesa 7i43 card. I had this happen
once before, but on a new machine with a brand new 7i43 card. I replaced the
card and the problem went away. On this machine I replaced the
8sstne/AADmUPJDCqp1XVVXcc102TKwa?dl=0
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot
if anyone has any interest.
I sold the mill I was going to use it on so it just sits on a pallet
collecting dust.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
I am half-heartedly looking for a rotary table, smallish but without any
huge backlash, for use on the g
Peter, et al,
I will check that too at the next opportunity. Thanks everyone for all of
the suggestions.
Regards,
Eric
I would check that you get decent differential voltages across the 7I33
inputs in both states of the inputs (no less than +-2.5 across the A,/A B,/B
or Z,/Z pairs in any
Andy,
That sounds plausible, I will check at the next opportunity.
Thanks,
Eric
On November 1, 2017 8:14:07 PM EDT, andy pugh <bodge...@gmail.com> wrote:
>On 1 November 2017 at 23:25, Eric H. Johnson <ejohn...@camalytics.com>
>wrote:
>
>> The problem is in the A axi
es any minor
>corrosion or possible looseness causing an intermittent.
>
>
>On Wednesday, November 1, 2017, 5:47:05 PM MDT, Eric H. Johnson
><ejohn...@camalytics.com> wrote:
>
> All,
>
>
>A machine (table) that has been running for about three months has
>
All,
A machine (table) that has been running for about three months has developed
an odd problem in the last couple weeks. Not sure if it has been getting
worse or if just the nature of the patterns being run has made the problem
more pronounced. The machine is an XYYA configuration with a
All,
Running lcnc 2.8.0-pre1, SUBROUTINE_PATH in section RS274NGC seems to be
ignored. If the subroutines are moved to nc_files they run properly regardless
of the setting of SUBROUTINE_PATH.
This does work at least in version 2.5.4.
Any ideas?
Thanks,
Eric
--
Sent from my Android device
t;Hi Eric!
>
>On 26.08.2017 22:48, Eric H. Johnson wrote:
>> Jon,
>>
>> ...
>>
>> After doing this however (and possibly other config changes I have
>made along the way), I am getting persistent following errors.
>>
>> At the moment they always oc
Eric
On August 26, 2017 3:15:02 PM EDT, Jon Elson <el...@pico-systems.com> wrote:
>On 08/26/2017 12:39 PM, Eric H. Johnson wrote:
>> Andy,
>>
>> Yes, as TYPE = ANGULAR in the joint section.
>>
>> As for P, yes that would seem to agree with what I am seeing.
&g
:11 PM EDT, Andy Pugh <bodge...@gmail.com> wrote:
>
>
>> On 25 Aug 2017, at 18:47, Eric H. Johnson <ejohn...@camalytics.com>
>wrote:
>>
>> Any idea what is going on here?
>
>Is A defined as rotary in the INI?
>
>Changing units will chang
per degree, I had to drop P to about 0.030. This holds true for
both the test and gantry configurations.
Any idea what is going on here?
Thanks,
Eric
On August 25, 2017 11:25:38 AM EDT, "Eric H. Johnson" <ejohn...@camalytics.com>
wrote:
>All,
>
>More info. The pro
will not cause Y to move.
I do not see how tuning parameters for A are affecting Y.
Thanks,
Eric
On August 25, 2017 9:13:54 AM EDT, "Eric H. Johnson" <ejohn...@camalytics.com>
wrote:
>All,
>
>Again with XYAY configuration under Lcnc 2.8.0-pre1. I have two
>configuratio
All,
Again with XYAY configuration under Lcnc 2.8.0-pre1. I have two
configurations, a checkout configuration that does not team Y1 and Y2, and the
production configuration which does.
In the checkout configuration, an MDI move such as:
G1 a360 f5000
Works fine.
Transferring all the tuning
Cross posting to EMC-Developers
Dewey,
Thanks for that. I probably should have started this thread on the developer
list. I will test it tomorrow.
Regards,
Eric
> Also, I cannot jog over linuxcncrsh ...
Updating the master branch for improved
joints-axes functionality necessitated changes
All,
I am running Lcnc 2.8.0-pre1 in an XYAY configuration. I use the linuxcncrsh
interface for my user interface. It is looking like there are additional
commands that need to be supported.
Home all, for example, on axis runs differently than doing the same thing over
linuxcncrsh. Also, I
Sebastian,
No, wasn't motor direction, but I think I know what to look for.
Thanks,
Eric
On August 23, 2017 12:14:24 PM EDT, "Eric H. Johnson" <ejohn...@camalytics.com>
wrote:
>Sebastian,
>
>Hmm, I see what I have to do to create it. If I tie a signal to that
>
3/2017 08:02 AM, Eric H. Johnson wrote:
>> Andy,
>>
>> I am using a 7i43 with 7i33 encoder daughter board and 7i37 IO
>> daughter board. I am using a slightly modified version of the stock
>> 7i43-big.ini configuration for check out purposes. I just add signals
>&
Andy,
Still more information. If I keep axis 2 disabled, and try to assert output 7
(gpio 046) with axis 0, I get the same error.
Regards,
Eric
On August 23, 2017 10:20:13 AM EDT, "Eric H. Johnson" <ejohn...@camalytics.com>
wrote:
>Andy,
>
>More information
Andy,
Sorry, SVST4_4.BIT.
4 encoders, 4 pwmgens 0 Stephens.
Regards,
Eric
On August 23, 2017 11:10:09 AM EDT, andy pugh <bodge...@gmail.com> wrote:
>On 23 August 2017 at 15:02, Eric H. Johnson <ejohn...@camalytics.com>
>wrote:
>> Andy,
>>
>> I am using a 7
Andy,
More information. The full error is:
hm2/hm2_7i43.0: TRAM write error! (addr=0x1000, size=8, iter=42444).
I did try upping the servo period from the default 1ms to 1.5ms, but no
difference.
Regards,
Eric
On August 23, 2017 10:02:23 AM EDT, "Eric H. Johnson" <ejohn...@c
AM EDT, andy pugh <bodge...@gmail.com> wrote:
>On 23 August 2017 at 06:43, Eric H. Johnson <ejohn...@camalytics.com>
>wrote:
>
>> I am getting a "TRAM write error", and not finding much on it in a
>search. I
>> am running lcnc 2.8.0-pre1, and using the Mes
All,
I am getting a "TRAM write error", and not finding much on it in a search. I
am running lcnc 2.8.0-pre1, and using the Mesa 7i43 board. The error occurs
when I physically assert the enable for the third axis. The first two axes
came up fine, but if the only change I make to the
All,
Never mind. Working now. I swapped 7i33 boards. Should go back to the other
board and make sure I was doing exactly the same thing.
Regards,
Eric
On August 18, 2017 1:52:58 PM EDT, "Eric H. Johnson" <ejohn...@camalytics.com>
wrote:
>All,
>
>I am not seeing
All,
I am not seeing the analog output values change on the Mesa 7i33TA daughter
board from the default 7i43-big configuration. I should see it across pins 9 &
10.
This is from Linuxcnc 2.8.0-pre1 running on Xubuntu 12.04.
I tried decoupling the analog output from the configuration as
give a meaningful error message and shut
down gracefully when it could not talk to the board.
Regards,
Eric
On August 16, 2017 6:48:07 PM EDT, andy pugh <bodge...@gmail.com> wrote:
>On 16 August 2017 at 23:05, Eric H. Johnson <ejohn...@camalytics.com>
>wrote:
>
>> Odd
EDT, Sebastian Kuzminsky <s...@highlab.com> wrote:
>On 08/16/2017 02:38 PM, Eric H. Johnson wrote:
>> Andy,
>>
>> I am afraid I do not entirely follow. Does that mean that build is
>available, or still rebuilding?
>>
>> I am showing
>> 1:2.8.0-pre1.330
com> wrote:
>On 08/16/2017 02:38 PM, Eric H. Johnson wrote:
>> Andy,
>>
>> I am afraid I do not entirely follow. Does that mean that build is
>available, or still rebuilding?
>>
>> I am showing
>> 1:2.8.0-pre1.3305.gde345856d
>> as both the insta
Andy,
I am afraid I do not entirely follow. Does that mean that build is available,
or still rebuilding?
I am showing
1:2.8.0-pre1.3305.gde345856d
as both the installed and latest version. It still locks up when I try to use
the hostmot drivers.
Thanks,
Eric
On August 16, 2017 4:15:06 PM
Andy,
I have a 6d on the end of gde..., but otherwise the same. Still locking up when
using the hostmot drivers.
Sims work, as does parport | stepper-inch.
Thanks,
Eric
On August 16, 2017 3:32:48 PM EDT, andy pugh <bodge...@gmail.com> wrote:
>On 16 August 2017 at 20:17, Eric H. Johns
Andy,
Yes, I see 3305, so I am waiting for that to increment, right?
Thanks,
Eric
On August 16, 2017 2:22:54 PM EDT, andy pugh <bodge...@gmail.com> wrote:
>On 16 August 2017 at 18:48, Eric H. Johnson <ejohn...@camalytics.com>
>wrote:
>> Sebastian,
>>
>> M
. Apologize for any typos, did not have an
easy way to transfer the text to my phone.
Thanks,
Eric
On August 16, 2017 1:08:52 PM EDT, "Eric H. Johnson" <ejohn...@camalytics.com>
wrote:
>Sebastian,
>
>Which version introduced opposing motor gantry support? Was that 2.7,
&
Andy, Sebastian,
I am unfortunately at the shop and can only get Internet through my phone. So I
am running half blind as far as Lcnc doc. Which version do I need to run that
supports gantry homing with opposing motors (added JOINT section to the ini
file).
It is that version I need to get
Andy,
I will wait.
Do I then just need to do an ap-get install?
Thanks,
Eric
On August 16, 2017 1:49:47 PM EDT, andy pugh <bodge...@gmail.com> wrote:
>On 16 August 2017 at 18:08, Eric H. Johnson <ejohn...@camalytics.com>
>wrote:
>
>> Which version introduced op
using the
version with gantry support, which I thought had been released.
Thanks,
Eric
On August 16, 2017 12:30:41 PM EDT, Sebastian Kuzminsky <s...@highlab.com>
wrote:
>On 08/16/2017 09:57 AM, Eric H. Johnson wrote:
>> All,
>>
>> I installed linuxcnc 2.8.0-pre to Xub
All,
I installed linuxcnc 2.8.0-pre to Xubuntu 12.04, and was running for some time.
I seemed to have upgraded something I should not. The sim configurations
worked, but the default 7i43-small just locks up with no error message. Nothing
responds. Can only power off computer.
I tried apt-get
going through that!
Ken.
On Thu, Jul 27, 2017 at 11:24 AM, andy pugh <bodge...@gmail.com> wrote:
> On 27 July 2017 at 02:13, Ken Johnson <bats...@gmail.com> wrote:
>
>> Specifically, machining the crankpins while having the blank turning
>> on it's main journal a
Whilst going through the slow process of cnc'ing my mill, I have been
trying to work out how to cnc mill crankshafts on it using my rotary
axis.
Specifically, machining the crankpins while having the blank turning
on it's main journal axis. I know the tool will have to move in both y
and z axis
Whilst going through the slow process of cnc'ing my mill, I have been
trying to work out how to cnc mill crankshafts on it using my rotary
axis.
Specifically, machining the crankpins while having the blank turning
on it's main journal axis. I know the tool will have to move in both y
and z axis
Todd,
Not that it is a solution, but there is actually some long dormant code
doing much of what you request; see this folder:
https://github.com/LinuxCNC/linuxcnc/tree/master/src/emc/usr_intf
Specifically emcsched and schedrmt, where emcsched is the scheduler and
schedrmt is a telnet like
All,
Just an FYI, Canonical is giving up on the Unity interface for Ubuntu and
going back to Gnome.
https://betanews.com/2017/04/05/canonical-killing-unity-for-ubuntu-linux-wil
l-switch-to-the-superior-gnome/
Regards,
Eric
Did you let the job out?
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
-Original Message-
From: emc-users-requ...@lists.sourceforge.net
[mailto:emc-users-requ...@lists.sourceforge.net]
Sent: Friday, March 31, 2017 1:31 PM
To: emc-users@lists.sourceforge
Sebastian, et al,
That got it.
So with this gantry homing, it only works with home all? Individual axes,
even those separate from the gantry, cannot be homed on their own?
Thanks,
Eric
On 02/20/2017 04:42 PM, Eric H. Johnson wrote:
> Don't I only need to run down through the below to inst
gt;> This is how I install rtai on Linux Mint 17.3
>>
>> JT
>>
>>
>>
>> On 2/20/2017 4:12 PM, Eric H. Johnson wrote:
>>
>>> I should add, I am using Xubuntu 12.04.
>>>
>>>
>>>
>>> Does rtai need to be install
I should add, I am using Xubuntu 12.04.
Does rtai need to be installed separately to use these modules? I believe
apt-key ran properly and the linuxcnc repositories were added properly.
There were no errors with apt-get update. I am getting errors of the form:
The following packages have
Does rtai need to be installed separately to use these modules? I believe
apt-key ran properly and the linuxcnc repositories were added properly.
There were no errors with apt-get update. I am getting errors of the form:
The following packages have unmet dependencies:
Linuxcnc: Depends:
http://buildbot.linuxcnc.org/
Then try sim/axis/gantry config
2017-02-20 19:09 GMT+02:00 Eric H. Johnson <ejohn...@camalytics.com>:
>
>
> I am finally getting around to re-controlling a large (15' x 30') XY
table.
> The gantry is driven by two oppositely mounted servo motors,
Thanks for your help Andy and Gene, I will investigate sum2 and see
what I can figure out.
Ken.
On Fri, Sep 2, 2016 at 6:44 PM, Gene Heskett <ghesk...@shentel.net> wrote:
> On Friday 02 September 2016 00:56:13 Ken Johnson wrote:
>
>> Is it possible to sum 2 Z-axes in
Thanks for the reply Andy- initially they will be manual, but the
long-term aim is to fit ball screws and motors and go fully cnc with
linuxcnc.
On Fri, Sep 2, 2016 at 3:20 PM, Andy Pugh <bodge...@gmail.com> wrote:
>
>
>> On 2 Sep 2016, at 07:56, Ken Johnson <bat
Is it possible to sum 2 Z-axes in linux-cnc? Reason for the question
is my mill has both a knee and quill, and I would like to put a dro on
both and have have linuxcnc sum them so the reading on-sceen
represents the distance between tool and job no matter which of the 2
I (or later, the software)
COORDINATES = X Y A
[AXIS_0]
TYPE = LINEAR
...
[AXIS_1]
TYPE = LINEAR
...
[AXIS_2]
TYPE = ANGULAR
...
-- Ralph
From: Eric H. Johnson [ejohn...@camalytics.com]
Sent: Monday, August 08, 2016 7:28 AM
To: 'Enhanced Machine Controller (EMC)'
Subject: Re: [Emc-users
output using a custom M1xx function and
setup a 2 axis machine instead of a 3 axis machine.
Can you explain better your application please ?
Regards
Alex
On Mon, Aug 8, 2016 at 2:51 PM, Eric H. Johnson <ejohn...@camalytics.com>
wrote:
> All,
>
>
>
> I am trying to use &quo
All,
I am trying to use "force home" on a machine which has X, Y and A axes. The
Z is a two position air cylinder, so not controllable as an axis, but does
appear in the configuration with basically nothing attached to it. Is there
a way to set the Z axis as "homed" (axis.N.homed) so that when
Thanks for all the help everyone, I think I have the problem resolved. For
anyone that cares, here are the sordid details. We had been having a problem
with the knife rotational axis losing a very small number of encoder counts
(generally less than a couple of degrees over a full pattern). The
wrote:
>Just a thought, is there a chance you have an imperfection in your head
>assembly or the kinimatics, that is causing your cut to be offset
>slightly? In other words are the pieces the same size if you cut them
>out in the opposite direction?
>
>- Original Message -
eater than the tool radius".
This is discovered in the look ahead, so it threw me for a moment.
Any bright ideas on how to get around this?
Thanks,
Eric
On June 30, 2016 9:14:13 AM EDT, andy pugh <bodge...@gmail.com> wrote:
>On 30 June 2016 at 13:26, Eric H. Johnson <ejohn...@
fore
each head lift / drop.
Thanks,
Eric
On June 29, 2016 1:06:08 PM EDT, Gene Heskett <ghesk...@shentel.net> wrote:
>On Wednesday 29 June 2016 11:18:39 Eric H. Johnson wrote:
>
>> All,
>>
>>
>>
>> I am cutting a dense mat material with an ultrasonic
Andy,
It does not have a controllable Z, it is a two position up/down.
Regards,
Eric
> Does Z1 have any meaning in compensating only in X and Y?
Does your machine have a Z-axis?
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is designed for
the especial use of
All,
I am cutting a dense mat material with an ultrasonic knife. It appears that
when the fibers are cut I get a small amount of expansion so the part to be
inset ends up just a little too large, even though it is cutting exactly the
same size as the base in which it is to be inset. I was
I return.
Regards,
Eric
On 05/12/2016 03:21 PM, Eric H. Johnson wrote:
>
> I am the author of that module, I actually thought it had been dropped
> some time back. It uses LCDProc to drive any number of LCD type
> displays. I ran into a problem with keypress / keyrelease
I am the author of that module, I actually thought it had been dropped some
time back. It uses LCDProc to drive any number of LCD type displays. I ran into
a problem with keypress / keyrelease for jogging, in that it was not supported
by the LCDProc library, although it was supported by the
I have found some incredible deals at HGR Surplus.
hgrinc.com
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
--
Find and fix application performance issues faster with Applicat
Danny wrote: We are setting up a manual tool change.
We use M61 Q (tool Number) this allows us to manually load a tool in the
spindle.
Yes we have to have the tool table.
Jeff JohnsonSuperior Roll & Turning
Message: 1
Subject: [Emc-users] Toolchange M6
To: "'Enhanced Machine
Peter,
It is geared down 4:1, so 40 degrees of shaft rotation for 10 degrees on the
axis.
Regards,
Eric
A plot would help, is ths 10 degrees of motor shaft position?
--
Find and fix application performance issues
-Original Message-
From: Peter C. Wallace [mailto:p...@mesanet.com]
Sent: Thursday, April 14, 2016 10:40 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Following error on angular axis
On Thu, 14 Apr 2016, Eric H. Johnson wrote:
> Date: Thu, 14 Apr 2016 09:20
Todd,
It is velocity mode. I am running headless so it is a bit of a pain to setup
for running things like halmeter and halscope unless I setup something like
VNC.
I won't be able to work on it until tomorrow, but will look at this then.
Thanks all,
Eric
Is the following error proportional
All,
I am trying to lick a problem with following error on an angular axis (A). I
am using a Mesa 7i43 with the 7i33 quad servo interface. If I set the axis
max_velocity above about 2 RPS I start getting following errors on G0 moves
with any reasonable value for FError (i.e. under 10 degrees).
Nicklas, when I built a pcb drilling machine some years ago, I found
constant acceleration and deceleration to top speed worked best, as
for the most part trying to go instantly to the maximum speed the
motors are capable of results in lost steps.
You will need a bit of experimentation to
you away from Linux CNC (we run four machines with
it) just pointing out I have very few issues with the Milacron controls.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
--
Site24x7
HI all,
Has there been a change to PROGRAM_PREFIX in version 2.6 or later, currently
using 2.7.
Under 2.5, if I issue the 'open' command from linuxcncrsh it would pull the
file from the path specified by PROGRAM_PREFIX in the DISPLAY section.
Now it seems whatever I put in for that parameter,
Sebastian,
I was trying to do a quick rebuild of an old machine where the ssd died and
wanted to be able to use the existing configuration as is. I went ahead,
however and just finished installing lcnc 2.7 to xubuntu 12.04 from the
instructions here:
Sebastian,
I am building from packages. That makes sense, I did do a reboot after rtai
was installed, but not after lcnc.
Thanks,
Eric
Are you building linuxcnc itself from source or installing the debian
package?
The updated memlock limit comes from the linuxcnc debian package, not from
the
Hi all,
I am rebuilding a box with xubuntu 10.04 and the linuxcnc 2.5.4 install
script. I ran into a similar problem last April that Sebastian walked me
through. Rechecking those posts, the problem is a little different. While
linuxcnc installed fine, I do not see the hostmot2 drivers in
Sorry about that
http://www.ebay.com/itm/121693122922?ssPageName=STRK:MESELX:IT_trksid=p3984
.m1558.l2649
Jeff Johnson
john...@superiorroll.com
Superior Roll Turning
734-279-1831
http://my.ebay.com/ws/eBayISAPI.dll?MyEbayBetaCurrentPage=MyeBayNextSelling
ssPageName=STRK:ME:LNLK:MESEX
?MyEbayBeta
http://my.ebay.com/ws/eBayISAPI.dll?MyEbayBetaCurrentPage=MyeBayNextSellin
gssPageName=STRK:ME:LNLK:MESEX
CurrentPage=MyeBayNextSellingssPageName=STRK:ME:LNLK:MESEX
If I am out of line posting this to the list let me know and it won't happen
again.
Jeff Johnson
john...@superiorroll.com
:
The error would help a lot... on my plasma machine I have a Rapid to
Home button and after I'm done cutting and before shutting off I press
the magic button. Homing only takes a few seconds when I fire it back
up.
JT
On 6/25/2015 8:33 PM, Eric H. Johnson wrote:
Hi all,
I am not sure I
Craig,
The home switch and the end of travel are about the width of the
micro-switch apart, i.e. 1-1.5. The axis stops well before the end of
travel, probably in a 1/4. Are you suggesting the accel and velocity are
too high or too low?
Regards,
Eric
Acceleration limits, after sensing switch
Hi all,
I am not sure I understand why I cannot increase my home velocity for X and
Y. I have a 12' by 20' table and have not been able to increase the home
velocity much above 0.25, which is tortuously slow (linuxcnc 2.6).
Unfortunately I did not write down the exact error message when I was
Sebastian,
Looks like it got it.
Thanks much,
Eric
Ok, so that shows you still have version 0.8.13 of the
hostmot2-firmware-7i43-2 installed, as per the prophecy.
Upgrade it to 0.8.21 and see how you do.
sudo apt-get -uV upgrade hostmot2-firmware-7i43-2
Hi all,
I am running into a problem with installing the hostmot drivers that I do
not recall encountering before. I installed the 7i43-small packages, then
just tried to run the hm2_servo | 7i43-small sample configuration, telling
it to make a local copy. It tells me it cannot find
All,
I should add, I am running on Xubuntu 10.04, which I have done all along
because it provides a smaller foot print, and I run headless. I installed
from the 10.04 script, then used Synaptic to install the hostmot package
(7i43-small).
Regards,
Eric
I am running into a problem with
On 6 April 2015 at 11:33, Eric H. Johnson ejohn...@camalytics.com wrote:
It tells me it cannot find SVST4_4S.BIN.
.BIN or.BIT?
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
--
BPM Camp
Sebastian,
0.8.13.g3e60a9b
Regards,
Eric
Which version of the hostmot2 packages do you have?
Find out with dpkg -l 'hostmot2*'.
There was a snafu for a while with the old package compatibility symlinks,
maybe something got missed.
Sebastian,
Is SVST4_4S.BIT different from SVST4_4.BIT. I assumed the 'S' meant that it
was for the small (200K) FPGA. SVST4_4.BIT was the only one that installed
with the 7i43-small package.
If I drop the hm2/7i43/ from the path in the ini file, it still does not
find the BIT file, at least any
Sebastian,
Never mind, I see the apt-get update did update to version 0.8.21, but still
no SVST4_4S.BIT file, and same error when I try to run referencing
SVST4_4.BIT.
Regards,
Eric
Sebastian,
You mean put deb... in the sources.list file, right? I did that, and
apt-get update worked fine and
1 - 100 of 444 matches
Mail list logo
