Ray Tayek rta...@ca.rr.com writes:
i agree. this looks like ghostscript is what i should be fooling
around with.
You need antialiasing. Use explicit settings on the command line,
e.g.,
-dTextAlphaBits=4 -dGraphicsAlphaBits=4
Why not use the tool I sent you?
-- Johan
At 04:48 AM 1/23/2011, you wrote:
Ray Tayek rta...@ca.rr.com writes:
i agree. this looks like ghostscript is what i should be fooling
around with.
You need antialiasing. Use explicit settings on the command line,
e.g.,
-dTextAlphaBits=4 -dGraphicsAlphaBits=4
Why not use the tool I sent
At 02:03 AM 1/21/2011, you wrote:
On 01/21/2011 09:13 AM, Ray Tayek wrote:
what should the values be for bounding box?
current bounding box size/current scaling factor=235/.47166=498,24 (I
used 500)
i understand that.
what about a bounding box like: %%BoundingBox: -1 -21 101 214
would
On Fri, Jan 21, 2011 at 11:28 AM, Ofnuts ofn...@laposte.net wrote:
On 01/21/2011 04:30 PM, Mike Williams wrote:
Would someone please post the differences between page3.eps and
page3b.eps?
diff page3.eps page3b.eps
2c2
%%BoundingBox: -1 -1 234 234
---
%%BoundingBox: 0 0 500 500
On 01/22/2011 10:38 AM, Ray Tayek wrote:
At 02:03 AM 1/21/2011, you wrote:
On 01/21/2011 09:13 AM, Ray Tayek wrote:
what should the values be for bounding box?
current bounding box size/current scaling factor=235/.47166=498,24 (I
used 500)
i understand that.
what about a bounding box
At 03:26 PM 1/20/2011, Ofnuts wrote:
...
All of them produce an image with less pixels than the conversion in
Gimp... (235x235 instead of 326x326).
If you look at the EPS it specifies a 235x235 bounding box, and a scale
factor to shoehorn the diagram in it.
the page.eps file that i am using
On 01/21/2011 09:13 AM, Ray Tayek wrote:
At 03:26 PM 1/20/2011, Ofnuts wrote:
...
All of them produce an image with less pixels than the conversion in
Gimp... (235x235 instead of 326x326).
If you look at the EPS it specifies a 235x235 bounding box, and a scale
factor to shoehorn the
On Fri, Jan 21, 2011 at 5:03 AM, Ofnuts ofn...@laposte.net wrote:
On 01/21/2011 09:13 AM, Ray Tayek wrote:
At 03:26 PM 1/20/2011, Ofnuts wrote:
...
If you edit the EPS to work with a
1:1 scale and a sufficient bounding box (2 lines to edit, no hard to
script), the output of convert
On 01/21/2011 04:30 PM, Mike Williams wrote:
Would someone please post the differences between page3.eps and
page3b.eps?
I tried changing scale to 1.0 1.0 and get an image with a thicker
outer border, but the image is clipped, only the lower left corner of
the figure is shown and the
On 01/20/2011 02:24 AM, Ray Tayek wrote:
hi, i have a lot of eps files that i need to convert to gif (or png).
i was trying to use image magic, but not having any luck.
i am a programmer, but i do not know lisp.
if i import an eps into gimp and save it as a gif, it look pretty
good. but i
Ray Tayek wrote:
hi, i have a lot of eps files that i need to convert to gif (or png).
i was trying to use image magic, but not having any luck.
Install ImageMagick on your computer then you can use its convert program
in a script to convert your images to the format you need.
On Wed, Jan 19, 2011 at 10:57 PM, Ray Tayek rta...@ca.rr.com wrote:
oh, it's python (didn't know that gimp ate python).
i will try some python. don't see any python-fu under filters though.
are the conversion options documented anywhere?
Are you on Windows? You'll need to install python
At 03:06 AM 1/20/2011, you wrote:
On 01/20/2011 02:24 AM, Ray Tayek wrote:
hi, i have a lot of eps files that i need to convert to gif (or png).
i was trying to use image magic, but not having any luck. ...
Not with Gimp... this is the kind of work ImageMagick's convert is meant
for. Might
At 11:07 PM 1/19/2011, you wrote:
Ray Tayek rta...@ca.rr.com writes:
if i import an eps into gimp and save it as a gif, it look pretty
good. but i need to convert hundreds of these.
can someone point me to some kind of starter script that would go
throug the eps files in a directory and
At 07:05 PM 1/19/2011, you wrote:
On Wed, Jan 19, 2011 at 7:24 PM, Ray Tayek rta...@ca.rr.com wrote:
hi, i have a lot of eps files that i need to convert to gif (or png) ...
i am a programmer, but i do not know lisp.
This was one of the first hits I got for 'batch' and 'convert' at the
plugin
At 12:46 AM 1/20/2011, you wrote:
Ray Tayek rta...@ca.rr.com writes:
http://tayek.com/bobt/images/gif.html
Can you send me the eps, please?
sure, attached please find. page3 is one i did the testing on.
thanks
---
co-chair http://ocjug.org/
page3.eps
Description: PostScript document
At 11:30 PM 1/19/2011, you wrote:
On 1/20/2011 2:24 AM, Ray Tayek wrote:
hi, i have a lot of eps files that i need to convert ...
Try David's Batch Processor:
http://members.ozemail.com.au/~hodsond/dbp.html
It's really cool.
i will try this.
thanks
---
co-chair http://ocjug.org/
At 03:06 AM 1/20/2011, you wrote:
On 01/20/2011 02:24 AM, Ray Tayek wrote:
hi, i have a lot of eps files that i need to convert to gif (or png).
i was trying to use image magic, but not having any luck. ...
Not with Gimp... this is the kind of work ImageMagick's convert is meant
for. Might
At 11:29 PM 1/19/2011, you wrote:
What are your problems with Imagemagick, which is exactly the tool you
need?
i go some ideas from the image magic list and i tried a bunch of
combinations of their suggestions. you can see what i tried at
http://tayek.com/bobt/images/gif.html.
what happens is
At 10:58 AM 1/20/2011, Chris Mohler wrote:
On Wed, Jan 19, 2011 at 10:57 PM, Ray Tayek rta...@ca.rr.com wrote:
oh, it's python (didn't know that gimp ate python).
i will try some python. don't see any python-fu under filters though.
are the conversion options documented anywhere?
Are
On 01/20/2011 11:40 PM, Ray Tayek wrote:
At 03:06 AM 1/20/2011, you wrote:
On 01/20/2011 02:24 AM, Ray Tayek wrote:
hi, i have a lot of eps files that i need to convert to gif (or png).
i was trying to use image magic, but not having any luck. ...
Not with Gimp... this is the kind of
At 02:41 PM 1/20/2011, Ray Tayek wrote:
At 11:30 PM 1/19/2011, you wrote:
On 1/20/2011 2:24 AM, Ray Tayek wrote:
hi, i have a lot of eps files that i need to convert ...
Try David's Batch Processor:
http://members.ozemail.com.au/~hodsond/dbp.html
It's really cool.
i will try this.
this
On Thu, Jan 20, 2011 at 7:43 PM, Ray Tayek rta...@ca.rr.com wrote:
At 02:41 PM 1/20/2011, Ray Tayek wrote:
At 11:30 PM 1/19/2011, you wrote:
On 1/20/2011 2:24 AM, Ray Tayek wrote:
hi, i have a lot of eps files that i need to convert ...
You may want to consider Ghostscript.
This was
Ray Tayek wrote:
yes, i tried a bunch of them at http://tayek.com/bobt/images/gif.html
but none of them are very good
There is a problem with the set of sample conversions. The image produced by
GIMP which is supposedly the good version of the image is larger than the
other samples you show.
At 08:44 PM 1/20/2011, you wrote:
Ray Tayek wrote:
yes, i tried a bunch of them at http://tayek.com/bobt/images/gif.html
but none of them are very good
There is a problem with the set of sample conversions. The image produced by
GIMP which is supposedly the good version of the image is larger
At 05:58 PM 1/20/2011, Mike Williams wrote:
On Thu, Jan 20, 2011 at 7:43 PM, Ray Tayek
mailto:rta...@ca.rr.comrta...@ca.rr.com wrote:
At 02:41 PM 1/20/2011, Ray Tayek wrote:
At 11:30 PM 1/19/2011, you wrote:
On 1/20/2011 2:24 AM, Ray Tayek wrote:
hi, i have a lot of eps files that i need
At 04:51 PM 1/20/2011, Ofnuts wrote:
On 01/21/2011 01:43 AM, Ray Tayek wrote:
At 02:41 PM 1/20/2011, Ray Tayek wrote:
At 11:30 PM 1/19/2011, you wrote:
On 1/20/2011 2:24 AM, Ray Tayek wrote:
hi, i have a lot of eps files that i need to convert ...
Try David's Batch Processor:
Ray Tayek wrote:
i put one here: http://tayek.com/bobt/images/page3.eps
I looked at the contents of the source file. Ignoring the scaling factor in
the image, all lines are 0.8 points with the exception of the outside border
which has a width of 1.92 points.
You can see the thicker border
hi, i have a lot of eps files that i need to convert to gif (or png).
i was trying to use image magic, but not having any luck.
i am a programmer, but i do not know lisp.
if i import an eps into gimp and save it as a gif, it look pretty
good. but i need to convert hundreds of these.
can
On 1/20/2011 2:24 AM, Ray Tayek wrote:
hi, i have a lot of eps files that i need to convert to gif (or png).
i was trying to use image magic, but not having any luck.
i am a programmer, but i do not know lisp.
if i import an eps into gimp and save it as a gif, it look pretty
good. but i
I realized that this wasn't particularly descriptive. My failing
script looks like this:
(define (script-reflect filename)
(let* ((image (car (gimp-file-load RUN-NONINTERACTIVE filename filename)))
(drawable (car (gimp-image-get-active-layer image
(script-fu-gimp-reflection
Quoting Mark McLaren mark.mcla...@gmail.com:
To create a batch reflection script I have tried taking a copy of
script-autocrop, changed the definition name to match the new filename
and changed the plug-in-autocrop line so that it call the reflection
plugin instead, like this:
Hi all,
I am a Script-Fu and Scheme newbie; please forgive my ignorance. I am
trying add reflection to a batch of PNG files using the GIMP reflection
plugin from:
http://registry.gimp.org/node/1025
I have previously been able to batch re-size my PNG files using a
script-autocrop script that
!
- Original-Nachricht
Von: Brad Pears br...@truenorthloghomes.com
An: gimp-user@lists.XCF.Berkeley.EDU gimp-user@lists.XCF.Berkeley.EDU
Betreff: [Gimp-user] newbie question!!!
Datum: 30/03/10 00:14
Hi all!! Well I am no graphic designer and am the dummest of the dumb -
when
On Mon, 2010-03-29 at 17:13 -0400, Brad Pears wrote:
Hi all!! Well I am no graphic designer and am the dummest of the dumb -
when it comes to graphics stuff. The guy who used to do all of this at
our company left and I got stuck holding the bag. I've never used GIMP
nor Photoshop. I have Gimp
Hi all!! Well I am no graphic designer and am the dummest of the dumb -
when it comes to graphics stuff. The guy who used to do all of this at
our company left and I got stuck holding the bag. I've never used GIMP
nor Photoshop. I have Gimp on my machine for some strange reason though
- I guess
On Mon, 29 Mar 2010 17:13:30 -0400
Brad Pears br...@truenorthloghomes.com wrote:
Can someone point me to or send me detailed instructions on how I
would open up two (or more) different images and then join them together
- change the background colours (if need be), add some text to the new
Hi guys,
I finally got Gimp installed and running for the purpose of writing a
web
application with image manipulation in perl.
I've been scouring documentation and found a few useful tutorials. But
I
still don't have a complete picture.
My first script (see below; I am running it from
@lists.xcf.berkeley.edu
Subject: Re: [Gimp-user] Newbie perl-gimp question
Hi guys,
I finally got Gimp installed and running for the purpose of
writing a
web application with image manipulation in perl.
I've been scouring documentation and found a few useful
tutorials. But
I still don't have
Hi guys,
I finally got Gimp installed and running for the purpose of writing a web
application with image manipulation in perl.
I've been scouring documentation and found a few useful tutorials. But I
still don't have a complete picture.
My first script (see below; I am running it from a shell)
Hi,
Just trying to learn how to specify arguments to script-fu
scripts. There's a lot of useful scripts there.
I was first trying to get script-fu-text-circle to work and
the Procedure Browser brings up the documentation that
indicates that the first argument is run-mode INT32 Interactive,
I just started using Gimp and I LOVE it! I am
planning on picking up a USB tablet with mouse-pen and
wondered if I should expect any of them to interface
without significant work?
I dont want to spend too much as this is all
relatively new for me, but I want to be able to use
the pen to
On Friday 04 May 2007 13:05, Dub Yah wrote:
I just started using Gimp and I LOVE it! I am
planning on picking up a USB tablet with mouse-pen and
wondered if I should expect any of them to interface
without significant work?
I dont want to spend too much as this is all
relatively new for
I select a rose with the magic wand. The selection looks good, but
there are a few leftover inside islands inside the rose, that are
still not selected. I switch to the lasso, click on add to selection,
and try to circle the inside islands to add them to the selection.
But instead of doing
you might try holding down the shift button when using the lasso
(instead of clicking on the add to selection button)
--
LEGENY Jozef
___
Gimp-user mailing list
Gimp-user@lists.XCF.Berkeley.EDU
Hi!
I am a new Gimp user but I have Linux and just Linux on my computer after IBM
stop developing OS/2 :). I never use Gimp for real job. Now I am new user
of Nikon digital camera and as newbie I have some problem with photos.
And finally my question: Is it possible to correct tilted horizon,
On 8/17/06, ajtiM [EMAIL PROTECTED] wrote:
And finally my question: Is it possible to correct tilted horizon,moire...with Gimp, please?I think next step will be buy a book about Gimp.The easiest way is to use the rotate tool. A great plugin (additional software for Gimp) that includes as part of
Hi I am a really new Gimp user. I have found the Artistic Filter - Gimp
Impressionist. I am interested in using this filter to convert photos into
painting like prints. Can some one give me a step by step process to do
this?
Much obliged.
Princess Pea
Student
--
View this message in context:
2006.03.25 00:34, princess_pea rašo:
Hi I am a really new Gimp user. I have found the Artistic Filter - Gimp
Impressionist. I am interested in using this filter to convert photos into
painting like prints. Can some one give me a step by step process to do
this?
If you're really new, read this
Hello. After read some GIMP tutorials and practised a little bit, I feel
like that I can make an image like in this example:
gopher://sdf.lonestar.org/I/users/weiwu/trans_sample.jpeg
Looks really simple, I can do this image in OpenOffice Draw in 3 mintues:
open the photo, create a shape of
Zhang Weiwu writes:
Hello. After read some GIMP tutorials and practised a little bit, I feel
like that I can make an image like in this example:
gopher://sdf.lonestar.org/I/users/weiwu/trans_sample.jpeg
Looks really simple, I can do this image in OpenOffice Draw in 3 mintues:
open the
On Tue, 14 Mar 2006, Akkana Peck wrote:
Zhang Weiwu writes:
Hello. After read some GIMP tutorials and practised a little bit, I feel
like that I can make an image like in this example:
gopher://sdf.lonestar.org/I/users/weiwu/trans_sample.jpeg
Looks really simple, I can do this image
At the risk of asking what is probably THE most obvious question of
the year, here goes:
I downloaded and installed GimpShop. I'm running Mac OS-X version
10.4.5. I also downloaded X11user.pkg from Apple and attempted to
install it. However, during the install, I got a message stating You
Am 03.03.2006 um 23:36 schrieb Paul North:
At the risk of asking what is probably THE most obvious question of
the year, here goes:
I downloaded and installed GimpShop. I'm running Mac OS-X version
10.4.5. I also downloaded X11user.pkg from Apple and attempted to
install it. However,
Thanks, Robert. I'll have to install X11 from the Tiger DVD.
I've already discovered that people are a bit sensitive about
Gimpshop. Another Gimp-user poster wrote:
I appreciate your help. Gimpshop is my first foray into the world of
Gimp. I'm hoping to use it in place of an aging version
Afternoon All
A newbie to Gimp but wanted to give it a go as I'd heard so many good
things about it.
Found a basic problem that could stop me using it - but I'm sure it's
solvable.
I'm running Gimp through X11 on a Mac (running OSX 10.4.5).
I keep all my work on a remote file server but
Ross Brown wrote:
Afternoon All
A newbie to Gimp but wanted to give it a go as I'd heard so many good
things about it.
Found a basic problem that could stop me using it - but I'm sure it's
solvable.
I'm running Gimp through X11 on a Mac (running OSX 10.4.5).
I keep all my work on a
Sorry, newbies are not allowed here.
Right, I'll take my Mac and wipe my tears then...
Just kidding.. :)
Thank God for that!
Is the problem the mounted drive doesn't appear in the Open dialog or
that it does appear and you can't open it?
The mounted drive doesn't appear in the
Am 01.03.2006 um 20:02 schrieb Ross Brown:
Sorry, newbies are not allowed here.
Right, I'll take my Mac and wipe my tears then...
Just kidding.. :)
Thank God for that!
Yeah, you should be - not everybody has as much luck as you did ;)
Is the problem the mounted drive doesn't
so where did you search? The right place would be /Volumes/
nameOfTheMountedVolume. If you can't navigate to that place for
some reason you can enter the path directly to the text field in
the GIMP open file dialog.
Aha! (sort of).
Found it but it wasn't *that* simple...
Open | Filesystem
On Wed, 2006-03-01 at 17:24 +, Ross Brown wrote:
Afternoon All
A newbie to Gimp but wanted to give it a go as I'd heard so many good
things about it.
Found a basic problem that could stop me using it - but I'm sure it's
solvable.
I'm running Gimp through X11 on a Mac (running
No, not MJ. I have a nice picture I'd like to print and frame but
it has the stupid date/time string in yellow in the corner. I
have subsequenly turned off the date stamp so that won't happen
again. Fortunately, maybe, the stamp is in a field of nice green
grass, so I was hoping somehow I could
Jim Lynch wrote:
No, not MJ. I have a nice picture I'd like to print and frame but it
has the stupid date/time string in yellow in the corner. I have
subsequenly turned off the date stamp so that won't happen again.
Fortunately, maybe, the stamp is in a field of nice green grass, so I
was
On Mon, Sep 26, 2005 at 01:32:00PM -0400, Jim Lynch wrote:
No, not MJ. I have a nice picture I'd like to print and frame but it has the
stupid date/time string in yellow in the corner. I have subsequenly turned
off the date stamp so that won't happen again. Fortunately, maybe, the stamp
is in
OK, OK, I'm convinced. The first time I read clone I
thought it was a way to work on a copy of the original so I
didn't screw it up. Now I get the message. It only
takes about 5 swings of the 2x4 to get my attention. Thanks to
all. I've learned something . While this isn't perfect I
don't think
On Monday 11 July 2005 20:30, Joao S. O. Bueno Calligaris wrote:
Jonathan:
You have to further trim down your selection, by using the selection
by color and clicking on the desired color.
In order for the new selection to be within the original selection,
you have to use the select by color
Jonathan Allen writes:
I have a first-time question. In general terms, how can I change all the
pixels of one colour within a hand-drawn selection into another colour ?
Select by color, Fill
But that selects all the black text in the guf, not just the one letter
I need to colour.
Hi,
Jonathan Allen [EMAIL PROTECTED] writes:
I have a first-time question. In general terms, how can I change
all the pixels of one colour within a hand-drawn selection into
another colour ?
Edit-Fill with FG Color
The fact that you find it easier to ask this on a mailing-list than to
Hi All,
I have a first-time question. In general terms, how can I change all the
pixels of one colour within a hand-drawn selection into another colour ?
In specific terms, I have a gif file containing some black-on-white text.
I want to be able to colour various parts of the black text to be
Andreas,
I have a first-time question. In general terms, how can I change all the
pixels of one colour within a hand-drawn selection into another colour ?
Select by color, Fill
But that selects all the black text in the guf, not just the one letter
I need to colour. That was why I had
Thank you, everyone, for the great amount of info I've gotten on this layer
problem.
First, some apologies: Please understand that I'm totally new to GIMP,
and I'm
not a designer. I'm starting at zero. I'm doing this postcard for my
wife to
try to keep from paying a professional. But of course
Hello, everyone. I'm brand new to GIMP for Mac, so first a hearty hello!
For my first project with GIMP, I'm trying to make a postcard for an
art exhibition. I started by opening the central image that I want on
the card, then I adjusted the size of the layer containing the image to
6.75 X 4.75
So, I typed the text I wanted into the text tool window. The part of
the text that lies on the image is visible, but the part that dangles
off into the white space below is invisible. I can't see it.
Any guidance? Please... I have a deadline for this project. Thank you.
Hm, RTFM comes to
Welcome John. (2 ways to do this. Top one is better, because it's easier
to colour the background)
1.) First open a new image (FileNew...) with the desired size (in this
case I thing you said 6.75 X 4.75) and the desired background colour,
then open the central image (FileOpen...), then copy the
Is there an easy way to do exports from the xcf format to yield jpgs?
I'm currently using File - Save a Copy, but labor intensive for every
change. (Command line is fine, so I can script it.)
--Kurt
___
Gimp-user mailing list
On Thu, Apr 28, 2005 at 12:06:18PM -0400, Kurt Guenther wrote:
Is there an easy way to do exports from the xcf format to yield jpgs?
I'm currently using File - Save a Copy, but labor intensive for every
change. (Command line is fine, so I can script it.)
i have some python scripts and
Kurt Guenther [EMAIL PROTECTED] writes:
Is there an easy way to do exports from the xcf format to yield jpgs?
I'm currently using File - Save a Copy, but labor intensive for every
change. (Command line is fine, so I can script it.)
gimp -i -b (let* ((image (car (gimp-file-load 1 foo.xcf
Hi there - I'm a newb to the linux/gimp world, and previously only
dwelt on Photoshop elements in WinXP.
I've been lurking the typical web pages and reading up on the
tutorials, and was wondering if someone somewhere has a simple way to
make a 'stencil' image. (Think stencils like spray painting
On Apr 5, 2005 2:56 PM, Sara Schein [EMAIL PROTECTED] wrote:
Hi there - I'm a newb to the linux/gimp world, and previously only
dwelt on Photoshop elements in WinXP.
Wellcome! =D
I've been lurking the typical web pages and reading up on the
tutorials, and was wondering if someone somewhere
On Tue, 5 Apr 2005, Sara Schein wrote:
Date: Tue, 5 Apr 2005 13:56:14 -0400
From: Sara Schein [EMAIL PROTECTED]
To: gimp-user@lists.xcf.berkeley.edu
Subject: [Gimp-user] Newbie - looking for info on 'stencils'
Hi there - I'm a newb to the linux/gimp world, and previously only
dwelt
Hi,
Scott Binns [EMAIL PROTECTED] writes:
So, my question now is, how do I build the plugin? What
configuration/tools do I need, and what steps to I follow to get the
.exe?
You need a C compiler and you need the libgimp header files. GIMP
comes with a tool called gimptool that helps you to
Hi,
Matthew H. Plough [EMAIL PROTECTED] writes:
First of all, thank you to Carol for being so helpful on this issue.
I praise your willingness to help people out, and go beyond the call
of duty in providing useful information. If you and Sven were not
high-ups, you would be
Hi,
Michael Schumacher [EMAIL PROTECTED] writes:
Some users reported that the gimptool executable doesn't work
correctly. I don't think anyone invested much time in this, since
everyone who seems to be able to compile gimp and plug-ins so far uses
cygwin and/or mingw and thus thze gimptool
On Sat, Nov 13, 2004 at 01:17:48AM -0700, Scott Binns wrote:
I don't mind building it myself, I just don't know what the process to
build is. I downloaded it from http://registry.gimp.org/ - is there some
other place to get the binaries for plugins?
this comes in the gimp source that you
So, my question now is, how do I build the plugin? What
configuration/tools do I need, and what steps to I follow to get the .exe?
Scott
On Mon, November 15, 2004 1:04 pm, Carol Spears said:
On Sat, Nov 13, 2004 at 01:17:48AM -0700, Scott Binns wrote:
I don't mind building it myself, I just
On Mon, Nov 15, 2004 at 02:41:49PM -0700, Scott Binns wrote:
So, my question now is, how do I build the plugin? What
configuration/tools do I need, and what steps to I follow to get the .exe?
if i remember correctly, you are asking for the gimptool. i get this
everytime i build gimp from the
Yes - but what do I need to do to build gimp (and by extension the plugin)?
Thanks,
Scott
On Mon, November 15, 2004 3:48 pm, Carol Spears said:
so here is the thing. since this plug-in uses the tools to build
software that you need to build the gimp with anyways, the only way to
get it is to
First of all, thank you to Carol for being so helpful on this issue. I
praise your willingness to help people out, and go beyond the call of
duty in providing useful information. If you and Sven were not
high-ups, you would be banned for being trolls.
This is the best I can do for now since I
Gezim Hoxha wrote:
As far as gimptool I wouldn't know...but I guess (big guess) that
it's just some part of gimp--maybe toolbar!
gimptool is a script that help you to compile gimp plug-ins. It knows
about all the compiler switches that are needed, calls the compiler to
build the plug-in and can
I don't mind building it myself, I just don't know what the process to
build is. I downloaded it from http://registry.gimp.org/ - is there some
other place to get the binaries for plugins?
I am using Gimp 2.0.5
Thanks,
Scott
On Sat, November 13, 2004 1:01 am, Gezim Hoxha said:
When I look in
I just downloaded and installed Gimp. I was browsing the plugin
repository, and downloaded a couple of plugins, but don't know how to get
them installed - they are just the source files. I am running Windows XP,
and used the installer provided on the Gimp web site from Jernej Simoncic.
Any help
Since I don't have windows XP I don't know the exact
directory, but when you open up gimp, choose
FilePreferences then on the left hand side click on
Plug-ins under Foldersin here the directories
where the plugins are stored should be listed.
-Gezim
P.S. when you post on the list please try
When I look in the folders listed, there .exe files there. the plugin I
downloaded is a .c file - how do I get it from a .c to a .exe? I looked
through the .c file, and it made mention of gimptool-2.0, so maybe I
should be asking where do I get it?
Thanks
Scott
On Fri, November 12, 2004 11:20
Hi,
On Sun, 1 Aug 2004 02:04:48 -0400, John J. Zanath
[EMAIL PROTECTED] wrote:
Gentlepeople:
I've downloaded a few freeware pix managers simply to find one that
allows easy thinning down of jpegs for quicker eBay downloading. Is
this called resizing, resampling, or what?
I can't call up
On Sun, 1 Aug 2004 03:34 pm, John J. Zanath wrote:
Gentlepeople:
I've downloaded a few freeware pix managers simply to find one that allows
easy thinning down of jpegs for quicker eBay downloading. Is this called
resizing, resampling, or what?
I can't call up HELP to find out how this is
Sorry people, here's a little more information. Any help would be
apprecaited...
[EMAIL PROTECTED] channel_mixer-1.1]# make
make: gimp-config: Command not found
make: gimp-config: Command not found
h#Bh#Bgcc -g -O2 -Wall channel_mixer.c -o channel_mixer
channel_mixer.c:36:26: libgimp/gimp.h:
On Thu, 2003-10-16 at 14:26, Sven Neumann wrote:
Hi,
David McWilliams [EMAIL PROTECTED] writes:
I just downloaded the channel mixer plug-in, any clue on how to install
it. I am running RH9, with the original RPM build of Gimp. I gunzipped
and untarred it, cd to it and ran 'make', with
Hi,
David McWilliams [EMAIL PROTECTED] writes:
Sorry people, here's a little more information. Any help would be
apprecaited...
[EMAIL PROTECTED] channel_mixer-1.1]# make
make: gimp-config: Command not found
Here we are. You don't have gimp-config (also called gimptool) on your
system.
I just downloaded the channel mixer plug-in, any clue on how to install
it. I am running RH9, with the original RPM build of Gimp. I gunzipped
and untarred it, cd to it and ran 'make', with no luck. Please excuse
my ignorance, any pointers...
David
=
Checkout the McWilliams family website @
Dear All:
I am truly a newbie to Mesa. If want to learn more about Mesa API,
would an OpenGL manual/book be applicable?
thanks
--Vincent
_
The new MSN 8: smart spam protection and 2 months FREE*
1 - 100 of 104 matches
Mail list logo
