Thanks,
I'll make sure I upgrade to the latest Xfree86 before configuring it.
Right now it sets it to the SVGA driver which is not accelerated. My guess
is the version I have on my cd is at 1 or to revs behind. Metro-X is 2.
*** REPLY SEPARATOR ***
On 6/16/98, at 4:25 PM,
Anyone here ever set up a news server with Linux? What software do you
use to host the groups? How hard is it to do? I'd like to do this to
demonstrate to management that Linux is indeed a viable system for the
enterprise. (In any case we need one.) Any useful help will be greatly
Comments are in line!
Redhat tells me no where how its kernal installs default. It only gives me
2 options in its chapter "next steps after install".. To do a modular or
monolithic compile. My netowrk card (Linksys 10/100 using the PNIC chip)
is not supported by Redhat's driver. It
Just remember what happened between VMS and Berkeley Unix. All the
comments you are making now were made 15 years ago, when that struggle
became visible. The outcome? Unix built the Internet. Ken Olsen's
insistence on VMS destroyed DEC and allowed companies like Sun to blossom.
---Rsk
Hi,
How can I setup NFS so that only certain hosts can nfs-mount the exported
file system and other hosts are denied nfs-mount access ?
It appears that hosts.allow (and hosts.deny) are for TCP/IP services only.
-- Raj
+---+
| Raj Singh
Hi
Is there a list for linux newbies thats not quite as busy as this
one. I find that when I get 125 messages in the morning I end up
deleting, without reading, most of them. That seems like defeating
the object to me.
Regards
Terry
--
PLEASE read the Red Hat FAQ, Tips, Errata and the
how do I start programs when motif mwm starts ?
Claudiu
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
On 16-Jun-98 Michael Jinks wrote:
I've been trying to get sound to work on my 5.1 box using a soundblaster 16
(as per the post right before this one).
Retracing my steps, I just re-compiled my kernel with sound support as a
module. But when I did make install_modules, I got this:
Just
I'm quite unhappy with StarOffice's "system" fonts (you know, the ones in
the menus and stuff) on my 15" 1024x768 monitor.
How can I enlarge them ?
Claudiu
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata
On 16-Jun-98 Jason Belich wrote:
after getting assorted uncompression errors with SO4sp3 both using the
wrapper and manually using tar -xvzf, I attempted to just gzip -d the
tarball and I get consistantly the error
invalid compressed data--crc error
I've dnlded from several different
Try [EMAIL PROTECTED]
regards
David Buddrige
-Original Message-
From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, June 17, 1998 3:53 PM
To: [EMAIL PROTECTED]
Subject: beginners help for redhat linux
Hi
Is there a list for linux newbies thats not quite as
Hi,
how can i run pam with ncp under RH5.1 ??
And how can i start pam
Please help.
cu armin irger
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail
This should be a little Criticism to Redhat Folks...
It´s nice for you folks to alway be on top of LiNUX World, but if you do
so, please stick to one Package (B.e. gcc + egcs Stuff). I´m b.e. not able
to compile applications needing both Codes, C and C++ Code, since I have
severe Linker
Hi,
Where is the "sendmail installation and users guide" that the sendmail
man page refers too.
thanks in advance
--
robert
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To
Someone was having a tough time getting their sound card configured.
Here's how I did it:
o I read/scanned the Sound-HOWTO first
(I have a SB16 non-PnP (as far as I know) sound card)
o If you're using Win95, make a note of your sound card's IRQ, DMA
channels via Control Panel - System (or
"rs" == Raj Singh [EMAIL PROTECTED] writes:
rs How can I setup NFS so that only certain hosts can nfs-mount the
rs exported file system and other hosts are denied nfs-mount access
rs ?
From "man nfsd":-
SEE ALSO
exports(5), mountd(8), ugidd(8C)
man exports
vi /etc/exports
--
"jt" == Joe Tseng [EMAIL PROTECTED] writes:
jt Anyone here ever set up a news server with Linux? What software
Yep.
jt do you use to host the groups? How hard is it to do? I'd like
inn, from the Red Hat CD. Unless you have particularly special
needs, in which case you may get away
Where can I find the non-expiring real audio/video server at? Thanks..
Bryan
P.S. If anyone has a site with FP98 extensions in RPM format, I'd
appreciate it if you sent it to me :)
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
Dave Reed writes:
From: Ron Golan [EMAIL PROTECTED]
I checked what version of PAM I'm using since I am using XFree86 3.3.2
(see below) but I am using RH5.0. What is the reason for not using this
version with 4.2? Is it a glibc thing?
[root@ozenfant /tmp]# rpm -qvi pam
Name
Hello,
I'am trying to standardized my "From:" in my e-mail. To be more specific
I'am trying to use the name my ISP has assign me, which is different
than my user name. I tried to use the Pine mechanism, customize-header,
but when I went to send an e-mail it told me I couldn't cutomize "From".
My
Andy Lindeman writes:
hoeteck-
I already have the fetchmail part going. I want my outgoing email to look
like it's coming from my ISP account [EMAIL PROTECTED], when it is
really coming from [EMAIL PROTECTED] (my own unregistered, always
changing IP addr, not on the net 24x7 linux box).
Good day all -
Just a short question. I upgraded from ncurses-1.9e-8 to
ncurses-4.2b980516-1 to get BitchX-74p4-1 working, and now it seems that
mc doesnt work any more. Is there a fix for this? I noticed mc requires
libncurses.so.3.0 which still seems to be on the system
Chris Humphres writes:
If I remember correctly, the email in question only contained the html. I
deleted it and yes I use pine. When you've got hundreds of emails to go
through, you don't have the time to save to a tmpfile and browse with
netscape or scan with a text editor. I agree with
At 09:06 6/17/98 +1000, Bradley, Greg wrote:
The problem is still, that I must know that Linux exists and that I want
it, before I can subscribe to a journal to find somewhere that I can get
it from.
WIN95 screams at me from every newspaper advertisment and editorial.
When was the last time you
Steve Frampton wrote:
6) The next thing to do is create an ISO image, you can then burn
this image onto a CD using your favourite platform - or even
Windows ;) To do this enter the following as one line:
mkisofs -b misc/boot/autoboot.img -c misc/boot/boot.catalog -a
On Wed, 17 Jun 1998, Raj Singh wrote:
Hi,
How can I setup NFS so that only certain hosts can nfs-mount the exported
file system and other hosts are denied nfs-mount access ?
It appears that hosts.allow (and hosts.deny) are for TCP/IP services only.
NFS acess is controlled by the
Kevin Smith wrote:
On Mon, 15 Jun 1998, Graham Hemmings wrote:
First, let me assure you that appending .tar to a required directory name
does work at redhat (and most other FTP sites I suspect), I have just
downloaded RH5.1 using this method.
Second, the full procedure I
"Robert" == Robert W Canary [EMAIL PROTECTED] writes:
Robert Where is the "sendmail installation and users guide" that
Robert the sendmail man page refers too.
/usr/doc/sendmail/doc/op/op.me
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
Hello,
My system informed me that I had no space left in the root filesystem.
So, I removed a bunch of files totaling about 20meg. When I did a "df"
the filesystem still shows no space available. Where is the space
I freed-up?
TIA.
Wayne
--
PLEASE read the Red Hat FAQ, Tips, Errata and the
On Tue, Jun 16, 1998 at 09:43:27PM -0500, Dave Ihnat wrote:
MS is trying to simplify the world too much; most
Linux advocates (as, to be fair, most Unix advocates I've known for the
last quarter-century) try to trivialize the difficulties of configuring and
maintaining a complex OS.
I
I see formatted email (via HTML or any other scheme) as useful only within
organizatons or specified groups. Within those limits it can be *very*
useful. I have a newsletter that I'd like to publish in a fashion that's
readable with all it's formatting from within the recipient's mail client.
Dear Sir /Madame ,
I am a newbie at redhat linux . I want to connect to my isp using minicom.
I am using redhat 4.2 .
When I read the minicom howto , it talks about loading ppp dameon (pppd)
through the minicom software and unloading too after finishing .
I have compiled my ppp into my
Date: Tue, 16 Jun 1998 21:01:24 PDT
From: "Joe Tseng" [EMAIL PROTECTED]
Subject: Q: news servers
We aren't running news here anymore, but I installed it once to try it. The
server is INN (inn-1.7-2 in RH5.0). Read /usr/doc/HOWTO/News-HOWTO or take a
quick hike to:
Can anyone tell me if there is a rpm for the Perl/TK on Redhat 5.1. If
not how would I go about getting this package. Thanks for any help on
this problem.
[EMAIL PROTECTED]
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
In a message dated 98-06-16 21:37:24 EDT, you write:
Personally, I can say that HTML-formatted mail also has many advantages. I
do not wish to elaborate them here for various reasons. However, I was
very surprised at the lack of appreciation by a technical group. Most
importantly, I think
I use Dnews, which is commercial software. (www.netwinsite.com) The only
reason for doing this is that our internet provider doesn't give us a news
feed, and I have to suck the feed from Supernews (www.supernews.com).
'suck' proved less than useful for an operation of this size (a few hundred
On Tue, 16 Jun 1998, Michael Jinks wrote:
The ethernet card and the SCSI controller are both PCI, and both
_really_ want to claim IRQ 11. I think that this should be workable
under PCI (right?), but at the moment any command I try to send to eth0
returns a SCSI error.
Try moving one or
Maxwell Smart wrote:
Similar problem but, only tried staroffice-wrapper. Followed the exact same
procedure I used to get it working for 5.0 and keep getting it to start, look
for the file-link in /tmp and then just stop. A query shows the wrapper
installed.
Tried manually installing the
"mt" == Mauricio Teixeira [EMAIL PROTECTED] writes:
mt On Wed, 17 Jun 1998, wward wrote:
the filesystem still shows no space available. Where is the space
I freed-up?
mt Sometimes the space freed-up os shown only after a reboot... I
mt dunno why...
See the first paragraph of the
Maybe I am just dense, so please enlighten me. What problem does HTML
email solve? I see no reason for it, and am one of those that just
deletes it. But maybe if I knew the problem it solved I'ld be willing to
consider it a solution.
On Tue, 16 Jun 1998, David Hauck wrote:
In the responses
My system informed me that I had no space left in the root filesystem.
So, I removed a bunch of files totaling about 20meg. When I did a "df"
the filesystem still shows no space available. Where is the space
I freed-up?
Wayne
Excuse me, but how the Hell are any of us supposed to know what files
Unfortunately I don't have much knowledge about loadlin, I'll look for
some info and letcha know whut i find.
Chris
On Tue, 16 Jun 1998, LT wrote:
Chris,
I haven't tried that! But I am not using lilo because I am using DosLinux
and that doesn't appear to be there. Do you know of any
Waste of bandwidth. Put up a web page and email the url to subscribers
when it gets updated.
On Wed, 17 Jun 1998, Anthony E. Greene wrote:
I see formatted email (via HTML or any other scheme) as useful only within
organizatons or specified groups. Within those limits it can be *very*
I'd like to set my default cursor to a left pointer. Anyone know where this
is set?
Tony
--
Anthony E. Greene [EMAIL PROTECTED]
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
At 06:15 6/17/98 -0400, wward wrote:
Hello,
I'am trying to standardized my "From:" in my e-mail. To be more specific
I'am trying to use the name my ISP has assign me, which is different
than my user name. I tried to use the Pine mechanism, customize-header,
but when I went to send an e-mail it
This is a little vague for me.
Supposing I have a RedHat tree on a FAT filesystem ...
What does it mean by
[Intel Systems: If you are using a DOS filesystem, you will not be able to
use the full Linux filenames for the RPM packages. The installation
process does not care what the filenames
HELP! I tried to change my X server to VGA_16 while I figure out my new
video card (I am using 4.2), and when I run startx, it says there is no
server. When I run the server itself (X), it says there are to many links,
and when I runm XF86VGA_16, it says the same thing. Turns out the two are
At 08:15 6/17/98 -0600, James Boorn wrote:
Maybe I am just dense, so please enlighten me. What problem does HTML
email solve? I see no reason for it, and am one of those that just
deletes it. But maybe if I knew the problem it solved I'ld be willing to
consider it a solution.
HTML can serve
Hi
I have my linux system on a 420 Mb harddrive (/dev/hdc)
This harddrive has 2 partition one for linux system (/dev/hdc2) and one partition for
swap (/dev/hdc1).
lilo has master boot in /dev/hdc
I have now a new harddrive (/dev/hda) and want to move alla my linux system and swap
to this new
At 08:19 6/17/98 -0600, James Boorn wrote:
[about emailing HTML formatted documents]
Waste of bandwidth. Put up a web page and email the url to subscribers
when it gets updated.
Some people prefer push.
Some do not have toll-free local calling (not everyone lives in the
U.S.).
Folks,
I have a Dell Workstation 400 with an Adaptec 2940 UW.
My software is RedHat 5.1 (5.0 upgrade). With the Linux
kernel 2.0.34, this system works fine. With kernel 2.1.106,
at boot time it finds the controller then reports a timeout,
then goes into an infinite loop with reset/timeout
Hello,
I'am trying to standardized my "From:" in my e-mail. To be more specific
I'am trying to use the name my ISP has assign me, which is different
than my user name. I tried to use the Pine mechanism, customize-header,
but when I went to send an e-mail it told me I couldn't cutomize "From".
My
Anthony E. Greene wrote:
I see formatted email (via HTML or any other scheme) as useful only within
organizatons or specified groups. Within those limits it can be *very*
useful. I have a newsletter that I'd like to publish in a fashion that's
readable with all it's formatting from within
Has anyone install LPRng on RedHat 5.0 ?
i have tryed LPRng-3.4.2-1 and LPRng-3.5.1
but both won't print to SMB printer
they print to Network printer but only the first 3 lines because
a newline begin at the end of the preceeding line.
HELP
/***
*
Robert Hailman wrote:
HELP! I tried to change my X server to VGA_16 while I figure out my new
video card (I am using 4.2), and when I run startx, it says there is no
server. When I run the server itself (X), it says there are to many links,
and when I runm XF86VGA_16, it says the same
Leston Buell wrote:
I'm a newbie considering upgrading to a 17" monitor from one of those
online auctions. I've read the Red Hat hardware support page, which doesn't
actually have a section on monitors, but i want to know if the general lack
of compatibility with Plug 'n Play applies to
I use linux on pnp monitors. No problems w/XFree86 or console mode - I think
the video drivers just ignore pnp info, which is fine with me. Two systems
dual (duel :P) boot NT, one is dedicated linux.
Leston Buell wrote:
of compatibility with Plug 'n Play applies to monitors as well. ¿Do
On Wed, 17 Jun 1998, Leston Buell wrote:
actually have a section on monitors, but i want to know if the general
lack of compatibility with Plug 'n Play applies to monitors as well. ¿Do
No. Plug 'n' Play with respect to monitors is a marketing gimmick. It
effectively means that it is a
Hi
I have my linux system on a 420 Mb harddrive (/dev/hdc)
This harddrive has 2 partition one for linux system (/dev/hdc2) and one partition for
swap (/dev/hdc1).
lilo has master boot in /dev/hdc
I have now a new harddrive (/dev/hda) and want to move alla my linux system and swap
to this new
There is no such thing as a Plug 'N Play Monitor.
It's just the computer manufacturers that are feeding on peoples lack of
knowledge to suck them into buying their monitor. They think (and with good
cause) that people will buy it because Plug 'N Play is supposed to be such
a 'great' thing. I
One size does not fit all. Besides, the only bandwidth saved will be for
those users that do not retrieve the document. That will vary on a
case-by-case basis. There _is_ a place for HTML mail.
That may be. But not in my mailbox. :)
--
PLEASE read the Red Hat FAQ, Tips, Errata and the
I'm a newbie considering upgrading to a 17" monitor from one of those
online auctions. I've read the Red Hat hardware support page, which doesn't
actually have a section on monitors, but i want to know if the general lack
of compatibility with Plug 'n Play applies to monitors as well. ¿Do plug 'n
This is a response to the lovely language in the response to the
question below...I'd have to say thats pretty unappropriate...and the
files he removed are really inconsequential(at least in my point of view).
As an answer to Wayne's question, don't go by the percentage necessarily,
because
Can anyone advise me on how to install RH 5.0 from a CD-rom ?
I get as far as the menu that asks what kind of CD-rom driver -- my CD -rom
drive is a USDRIVEs 24DT . It is an atapi compliant drive attached to a
Soundblaster card. My problem is: when I get to the menu, I am offered a
choice of
I am needing to reinstall RH5.0, but would like to retain the /home
and /usr/local directories. I created each as seperate partions as
recomended in my initial install, but didn't write details anywhere.
When I start to reinstall and it asks for all the partition info,
I'm not sure how to
Hi,
This may sound stupid, but I have no idea on how to
do this. I just bought additional parallel card (
ISA, not p-n-p ), and I have to set jumpers for IRQ.
I cat'ed /proc/devices, to see if the first number
represent IRQ, however, I saw
/sbin/powerd used to be owned by SysVinit - but now it is not owned at all.
It is still INSTALLED, but no man page is found, and no package claims
ownership. was this intentional?
Tim
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
Does anyone know why I would get this error from sendmail when I try to
access the inbox via POP?
"Could not log into the mail server. The server responded:
being read already /var/spool/mail/username. Please enter new password
for user [EMAIL PROTECTED]"
I get this
From: Michael Jinks [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 17, 1998 12:41 PM
To: [EMAIL PROTECTED]
Subject: Re: 3c590 and PCI-SCSI card confict IRQ conflict
John J. Donohue wrote:
Try moving one or both of the cards to different PCI slots
and see if that
"encourages" them
I have posted to several linux newsgroups in search of an
answer to these questions, but so far, no answer so here
I go again.
I am having difficulty setting up my window manager, fvwm2,
and getting both my PPA Zip drive and the connected Epson
Color Stylus 600 working. When I installed RH
Here's how to unsubscribe:
Subcription/unsubscription/info requests should always be sent to
the -request
address of a mailinglist.
If a mailinglist for example is called "[EMAIL PROTECTED]", then
the -request
address can be inferred from this to be: "[EMAIL PROTECTED]".
To subscribe to a
Patrick O'Neil wrote:
I have finally gotten my RH system configured and ALMOST up to
full functionality. I do have a problem with printing, however.
I have an Epson Stylus Color 600 attached to lpt1 as well as
a PPA Zip drive. I installed scsi support for the PPA during
initial install
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 17, 1998 2:53 AM
To: [EMAIL PROTECTED]
Subject: beginners help for redhat linux
Hi
Is there a list for linux newbies thats not quite as busy as this
one. I find that when I get 125 messages in the morning I end up
From: Maureen Beck [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 17, 1998 12:28 PM
To: [EMAIL PROTECTED]
Subject: Re: beginner's question re RH 5.0 install
Can anyone advise me on how to install RH 5.0 from a CD-rom ?
I get as far as the menu that asks what kind of CD-rom driver
--
A lot of times you will find that when running low on space...and you
delete say, like you said, 20 M, that the df binary will show your
respective filesystem as 0 M left. But if you look at the actual amount to
the left of the 0, you will find that there is still some space leftI
don't know
At 08:19 6/17/98 -0600, James Boorn wrote:
[about emailing HTML formatted documents]
Waste of bandwidth. Put up a web page and email the url to subscribers
when it gets updated.
Some people prefer push.
Some do not have toll-free local calling (not everyone lives in the
U.S.).
On Tue, 16 Jun 1998 12:27:56 +0200, [EMAIL PROTECTED] wrote:
Hi Guy's,
need some help with my home network, specifically named..
Great how to at "www.dns.net/dnsrd/docs/basic/txt". I got my DNS
system working for my home intranet.
--
PLEASE read the Red Hat FAQ, Tips, Errata and
On 17 Jun 1998, Eze Ogwuma wrote:
Hi,
Does anyone know how to reach Visix the makers of Vibe and Galaxy?
I used to work for Visix - they closed down a couple months ago.
If you do a 'whois visix.com', you should be able to get a number for
Deborah Bedell, who is the President now. They
Robert W. Canary wrote:
Hi,
I don't know if this a sendmail problem or network configuration
problem.
All mail that goes through my SMPT is referanced as
(user)@office.ohiocounty.net it is supposed to be
(user)@ohiocounty.net. If I try to send mail to an account with
(user)@ohiocounty.net it
Hello!
Yesterday, I downloaded RedHat 5.1 from Sunsite. I want to make a CD-R
with the RedHat distribution. The problem is, I only have Windoze 95
(gag!) and a Smart and Friendly CD-RW 226, and I have two software
programs, CdQuadrat WinOnCD 3.5 and Adaptec EZ CD Creator 3.01b.
I used WinOnCD
Try LaTex (use the tetex rpm).
There is a package called Babel that deals with a variety of languages.
LaTex itself can produce a large variety of accents. I would be quite
surprised if it
is unable to produce the accents that you are after.
Regards
Michael
"Ivan Jose Varzinczak"
Maureen Beck wrote:
Can anyone advise me on how to install RH 5.0 from a CD-rom ?
I get as far as the menu that asks what kind of CD-rom driver -- my CD -rom
drive is a USDRIVEs 24DT . It is an atapi compliant drive attached to a
Soundblaster card. My problem is: when I get to the menu, I
lpd is broken (i386 version at least).
redhat 5.1 - lpr 0.21.2 - updated to lpr 0.31.1
redhat 5.1 - lpr 0.31.4
Between 0.17 and 0.21 something got broken. The daemon
acts as if every printcap entry had :rs=true:, thus only
honoring remote print requests from valid users. Intentional
On Tue, 16 Jun 1998, Kevin Seguin wrote:
is it possible to create a disk to boot from during installation of
rh5.0? i have NT on my machine now, and i want to install red hat so i
It seems pretty convoluted, and I would think that somewhere in there
there's something redundant, but I don't know
Greg Fall writes:
snipand maybe he doesn't even realize that he is using HTML.
end of snip
Since I accidentally started this thread, I've kept silent,
waiting for a response of this type. Now it has popped up, here is
my reply.
The snip above digs deep into the golden thread of why this list
Hi Michael,
I havn't used a 3c590 before, but the following usually works for
other 3coms. The technique includes running the configuration
program for the card. If there isn;t a configuration program, just
miss out the config steps.
1. Reset the motherboard to factory defaults.
2. Take the
Darque wrote:
I am needing to reinstall RH5.0, but would like to retain the /home
and /usr/local directories. I created each as seperate partions as
recomended in my initial install, but didn't write details anywhere.
Good that you did that. "df -a" should give an idea about who's
who.
Sorry about the returned mail to the list Shouldn't happen again...
Anyway .. For the cause of it...
I am trying to set up a virtual mail server for a client... I am having a
brain beating time doing it.
I have sendmail-8.8.5-4 on an older RedHat Linux system. (rpm version)
I have tried
what rpm does the file stdio.h come in?
I just can't seem to find it on my system and I am thinking I just didn't
install it. I am running RedHat 5.0
Thanks!!
Paul VanDyke
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ
yes
On Wed, 17 Jun 1998 [EMAIL PROTECTED] wrote:
Hi,
I have searched the web, looking if it is possible to
run Scourge of Armagon ( Quake add-on pack ) on
Linux. So far, I did not find any definite answers.
Is it possible?
Thanks,
Nikita.
--
PLEASE read
Hello!:
Just a curious question, where do I read about the Environment variables for RH?
I've read some instructions which tell me to change or add them but I just don't know
anything about this, For example, when I call edquota it says it will call "vi" or the
editor is defined for me,
On Wed, Jun 17, 1998 at 07:54:40PM +0800, Graham wrote:
mkisofs -b misc/boot/autoboot.img -c misc/boot/boot.catalog -a
-A "RedHat Linux 5.0 with Patches to 06/02/98" -d -L
-o /temp/RH5.iso -P "Publisher ID" -p "Preparer ID" -r -T
-N /temp/rh5
-BEGIN PGP SIGNED MESSAGE-
I have a Vibra16 PnP in my Linux box.
In MustDie'95 it looks that it have io220, irq10
and two dma 1 0. And it works as true 16-bit card.
When I boot Linux it tell me that there are no 16-bit
dma then use dma1 for 8 bit. So I have not 16-bit
sound in Linux.
Folks,
I know I should post this to the Applix list, but I'm not a member, I
don't have time to sign up, and I *sure* don't have time to read another
list. I hope someone here can help me with what I think may be a minor
problem, but could possibly prove to be a "suite-buster". I suspect I'm
Evening all -
Another set of problems/questions...not sure how many of you have
compiled ircd on your rh linux boxes but i am trying to recompile ircd
(ircu2.9.32) on a newly installed rhl5.0 kernel 2.0.34 server (formerly
freebsd). I ran the Config and edited the /include/config.h file and
OK Just moved from 4.0 to 5.1 and I've hit some quick snags. After adding
a couple aliases to my /etc/profile (alias ls= ls -color, etc.) I can only
log in as root. No other account works, not my personal or my ppp account.
I don't understand it. I've tried "passwd eric" and all "tokens
Anthony E. Greene wrote:
I'd like to set my default cursor to a left pointer. Anyone know where this
is set?
According RedHat's Custom-X-Tips:
xsetroot -cursor_name cursorname
what you want is:
xsetroot -cursor_name left_ptr
other versions:
xsetroot -cursor_name {drapped_box, hand1,
Okay, I am looking for a good information source for getting
Yellow Pages -- or even better, NIS+ -- working on my three
Red Hat Linux 5.1 machines here...
I see ypserv, etc... but I also see a /var/nis directory that
is supposed to be for NIS+. There is a /var/yp directory, that
is obviously
On Wed, 17 Jun 1998, Brian Wright wrote:
Hello!
Yesterday, I downloaded RedHat 5.1 from Sunsite. I want to make a CD-R
with the RedHat distribution. The problem is, I only have Windoze 95
(gag!) and a Smart and Friendly CD-RW 226, and I have two software
programs, CdQuadrat WinOnCD 3.5
Sorry about the returned mail to the list Shouldn't happen again...
Anyway .. For the cause of it...
I am trying to set up a virtual mail server for a client... I am having a
brain beating time doing it.
I have sendmail-8.8.5-4 on an older RedHat Linux system. (rpm version)
I have tried
1 - 100 of 144 matches
Mail list logo
