treg  

Messages by Date

• 1996/11/21 Re: Part 68, Telco Power Draw -Reply Bill Vonalven
• 1996/11/21 Re: Bellcore Standard - Alarms? John Combs
• 1996/11/21 Re: Part 68, Telco Power Draw John Combs
• 1996/11/20 Re: Part 68 and PCMCIA Volt Regan Arndt
• 1996/11/20 Re: Part 68, Telco Power Draw Len Goldschmidt
• 1996/11/20 Re: Looking for Safety approved 48V power supply Pete Van Raalte
• 1996/11/20 Re: Free EMC training on a hot topic Doug McKean
• 1996/11/20 Part 68, Telco Power Draw Roger Prenger
• 1996/11/20 Re: Costa Rica telephone standards Pete Van Raalte
• 1996/11/20 Re: Free EMC training on a hot topic Jon Bertrand
• 1996/11/20 Just A reminder for the San Kamran Mohajer
• 1996/11/20 Re: FCC 15.247 >1 GHz RX LO spec Jon D Curtis
• 1996/11/20 Free EMC training on a hot topic Matejic, Mirko
• 1996/11/20 Bellcore Standard - Alarms? Doug McKean
• 1996/11/20 RE: Part 68 and PCMCIA Voltages Mel Pedersen
• 1996/11/20 Re: Part 68 and PCMCIA Voltages John Combs
• 1996/11/19 Re: FCC 15.247 >1 GHz RX LO spec Greg DesBrisay
• 1996/11/19 RE: Part 68 and PCMCIA Voltages Mel Pedersen
• 1996/11/19 Re: FAX CNG Tone Usage?? Duane J Marcroft
• 1996/11/19 Re: Part 68 and PCMCIA Voltages Duane J Marcroft
• 1996/11/19 Looking for Safety approved 48V power supply Dan Roman
• 1996/11/19 Costa Rica telephone standards Jon D Curtis
• 1996/11/19 FAX CNG Tone Usage?? Scott Roleson
• 1996/11/19 re: Australian ISDN Insulation Dick Shultz
• 1996/11/18 FCC 15.247 >1 GHz RX LO spec S
• 1996/11/18 Part 68 and PCMCIA Voltages Roger Prenger
• 1996/11/18 Re: Smart Telephone Stillingsl
• 1996/11/18 Re: Australian ISDN S/T interface tranformer requirements? BarryS
• 1996/11/18 RE: CISPR22 Matejic, Mirko
• 1996/11/18 Smart Telephone -Reply Bill Vonalven
• 1996/11/18 Australian ISDN S/T interface tranformer requirements? Jon D Curtis
• 1996/11/18 Smart Telephone Hans T. Mellberg
• 1996/11/15 PCMCIA type III roger
• 1996/11/15 Power Supply -Reply Frank Stucki
• 1996/11/14 CISPR22 ian (i.) chapman
• 1996/11/14 BRI U interface connections for the consumer Charles Purwin
• 1996/11/13 Re: DTMF specification Stillingsl
• 1996/11/13 RE: DTMF specification Ron Pickard
• 1996/11/13 DTMF specification Jay D. Hall
• 1996/11/13 Re: Austel TS 002 Duane J Marcroft
• 1996/11/13 Re: Austel TS 002 Joseph W. Jackson
• 1996/11/13 Anyone going to COMDEX FALL '96?? Nick Evans
• 1996/11/13 Lumped Parameter Networks DFWkbfisch
• 1996/11/12 re: BABT 340 ISDN Dielectric Tests Cynthia Pleach
• 1996/11/12 Re: How to make a Tem Cell? Stillingsl
• 1996/11/12 Austel TS 002 Duane J Marcroft
• 1996/11/12 Re: How to make a Tem Cell? Compatibility Products Corporation
• 1996/11/12 re: BABT 340 ISDN Dielectric Tests BarryS
• 1996/11/11 Re: New 56Kbps modems Jon D Curtis
• 1996/11/11 A few questions regarding EMC test equipment. Jon D Curtis
• 1996/11/11 Re: E1 primary rate ISDN Jon D Curtis
• 1996/11/11 Re: Power Supply Dave Spencer
• 1996/11/11 BABT 340 ISDN Dielectric Tests Michael Wright
• 1996/11/11 Power Supply swaite
• 1996/11/11 Re: Test to ANSI/UL913? Dick Shultz
• 1996/11/08 Re: Test to ANSI/UL913? Kamran Mohajer
• 1996/11/08 RE: Test to ANSI/UL913? Sandy Florence-ESF003
• 1996/11/08 Test to ANSI/UL913? sgrandy
• 1996/11/08 Re: US ISDN -Reply -Reply Bill Vonalven
• 1996/11/08 New 56Kbps modems Charles Purwin
• 1996/11/08 Re: US ISDN -Reply Phil Dolling
• 1996/11/08 Re: Discussion: dB Margin -6dB vs -10dB ? Doug McKean
• 1996/11/07 Re: FCC Class A data vs. EN Jon D Curtis
• 1996/11/07 Lab that tests to ASTM D4566 Jon D Curtis
• 1996/11/07 Re: FCC Class A data vs. EN Jon D Curtis
• 1996/11/07 Re: FCC Class A data vs. EN Tony Fredriksson
• 1996/11/07 Re: FCC Class A data vs. EN Tony Fredriksson
• 1996/11/07 Re: FCC Class A data vs. EN Steve Chin
• 1996/11/07 Lab that tests to ASTM D4566 John Combs
• 1996/11/07 Re: Discussion: dB Margin -6dB vs -10dB ? Lars Poulsen
• 1996/11/07 Re[2]: Discussion: dB Margin -6dB vs -10dB ? BParrott
• 1996/11/07 [no subject] Jody Leber
• 1996/11/07 Re: Discussion: dB Margin -6dB vs -10dB ? Doug McKean
• 1996/11/07 Re: Approval Labels Victor L. Boersma
• 1996/11/07 Re: Discussion: dB Margin -6dB vs -10dB ? Gabriel Roy/HNS
• 1996/11/07 Re: Discussion: dB Margin -6dB vs -10dB ? David Spencer
• 1996/11/06 Re: FCC Class A data vs. EN Dean Jurgensen
• 1996/11/06 Re: Approval Labels Victor L. Boersma
• 1996/11/06 Re: Approval Labels Larry Merchell
• 1996/11/06 Re: Approval Labels Larry Merchell
• 1996/11/06 Lab that tests to ASTM D4566 John L. Chase
• 1996/11/06 Re[2]: Discussion: dB Margin -6dB vs -10dB ? Jon Bertrand
• 1996/11/06 E1 primary rate ISDN Mel Pedersen
• 1996/11/06 Re: FIELD OF DREAMS VENDOR NIGHT by NPSS Wed, NOV 20 at 5:00PM-10:00PM John Freudenberg
• 1996/11/06 Re: Discussion: dB Margin -6dB vs -10dB ? Thomas Cokenias
• 1996/11/06 re: Approval Labels BarryS
• 1996/11/06 Discussion: dB Margin -6dB vs -10dB ? Doug McKean
• 1996/11/06 Re: Approval Labels Jon D Curtis
• 1996/11/06 Re: Approval Labels Cynthia Pleach
• 1996/11/05 Re: Approval Labels Edgard VANGEEL
• 1996/11/05 Labels - the final word Provart, Mike
• 1996/11/05 RE: Approval Labels roger
• 1996/11/05 Re: Approval Labels Dick Shultz
• 1996/11/05 Re: Approval Labels VColin
• 1996/11/05 RE: Approval Labels Dave Clement-LDC009
• 1996/11/05 Re: Approval Labels Stephen Phillips
• 1996/11/05 Approval Labels Mike Miele
• 1996/11/05 Approval Labels Charles Purwin
• 1996/11/02 USA and Japanese Acoustic Levels Jon D Curtis
• 1996/11/01 Re: US ISDN plus query -Reply Bill Vonalven
• 1996/11/01 Re: Czech Republic Standards ETSTELECOM
• 1996/11/01 Re: US ISDN -Reply rnewton
• 1996/11/01 Re: US ISDN John Shinn
• 1996/11/01 Re: US ISDN plus query James C. Fanning
• 1996/11/01 US ISDN -Reply Bill Vonalven
• 1996/11/01 US ISDN rnewton
• 1996/10/31 Modem requirements Mark Montrose
• 1996/10/31 Re: Acronyms! Regan Arndt
• 1996/10/30 re: Sweden radio approval slabudda
• 1996/10/30 Re: Back Pressure Signaling Dick Shultz
• 1996/10/30 Re: Czech Republic Standards Dick Shultz
• 1996/10/30 Re: Czech Republic Standards Dana Craig
• 1996/10/30 Back Pressure Signaling John Combs
• 1996/10/30 Czech Republic Standards John Combs
• 1996/10/30 re: Sweden radio approval roger
• 1996/10/30 Back Pressure Signaling Doug McKean
• 1996/10/30 Re: Injured colleague. Lisa Eirich
• 1996/10/30 Injured colleague. Lisa Eirich
• 1996/10/30 Sweden radio approval Jon D Curtis
• 1996/10/30 Re: German Approvals Dick Shultz
• 1996/10/30 German Approvals Duane J Marcroft
• 1996/10/30 Re: German Approvals Piet Thomassen
• 1996/10/29 Re: Mic Vendors Duane J Marcroft
• 1996/10/29 Re: Frequency response of Copper outside plant Pete Van Raalte
• 1996/10/29 Mic Vendors Pete Van Raalte
• 1996/10/28 re: Australia, BRI Isolation Requirement BarryS
• 1996/10/25 Re: Australia, BRI Isolation Requirement Kevin Richardson
• 1996/10/25 Seeking Confirmation of ITE Safety Standards in Various Countries (fwd) Art Michael
• 1996/10/25 Re: Frequency response of Copper outside plant Duane J Marcroft
• 1996/10/25 Frequency response of Copper outside plant John Combs
• 1996/10/25 Re: Australia, BRI Isolation Michael Royer
• 1996/10/25 Australia, BRI Isolation Requirement Dick Shultz
• 1996/10/25 Frequency response of Copper outside plant Jon D Curtis
• 1996/10/25 Re: Wanted: shielded enclosures DFWkbfisch
• 1996/10/25 Looking for DS1 & DS3 Test Procedures Grant . Pinto
• 1996/10/25 Seeking Confirmation of ITE Safety Standards in Various Countries Art Michael
• 1996/10/24 Correction to Wanted Shielded Rooms MLWaldron
• 1996/10/24 ALE List Pete Van Raalte
• 1996/10/24 Re: Spacing Regan Arndt
• 1996/10/24 European Regulatory Requirements for Central Office Equipment Jerry Martin
• 1996/10/24 Thailand Mains 220VAC line ABNORMAL variations Teddy . Rieber
• 1996/10/23 Re: Spacing Regan Arndt
• 1996/10/23 FWD>RE>IEC-950 4th Amendmen PETER TARVER-MTVPC
• 1996/10/23 Re: Wanted: shielded enclosures Jon D Curtis
• 1996/10/23 RE: Spacing Jon D Curtis
• 1996/10/23 Re: TI V.35 Line Driver Prob Michael Royer
• 1996/10/23 EMCS meeting, NOV-12 Matejic, Mirko
• 1996/10/23 TI V.35 Line Driver Problem Weaner_Randy
• 1996/10/23 Re: Acronyms! durian
• 1996/10/23 Acronyms! -Reply Bill Vonalven
• 1996/10/22 IEC950 -Layer of insulation peter_lim
• 1996/10/22 Wanted: shielded enclosures MLWaldron
• 1996/10/22 Re: Spacing Pete Van Raalte
• 1996/10/22 Acronyms! -Reply Frank Stucki
• 1996/10/22 Spacing rnewton
• 1996/10/22 Re: Acronyms! m. jamison
• 1996/10/22 Acronyms! Ynyr Roberts
• 1996/10/21 Re: IEC-950 4th Amendment Victor L. Boersma
• 1996/10/21 Re: V.17/V.34 Response to Drop-outs Lars Poulsen
• 1996/10/21 V.17/V.34 Response to Drop-outs David Drori
• 1996/10/21 Re: Hipot Testing - a History Lesson. Doug McKean
• 1996/10/21 Re: Hipot Testing - a History Lesson. Gabriel Roy/HNS
• 1996/10/19 Re: Caller ID for PSTN Jerry Roberton
• 1996/10/19 Caller ID for PSTN Joseph Hall
• 1996/10/18 Re: FCC SAR Requirement Tom Bao
• 1996/10/18 Re-Targeted FCC Sampling Activity Jon D Curtis
• 1996/10/18 Re: Hipot Testing - a History Lesson. David L. Spencer
• 1996/10/18 Hipot Testing - a History Lesson. Jon Bertrand
• 1996/10/18 Bellcore Test Equipment SEIJoeStan
• 1996/10/18 Spec Origins Pete Van Raalte
• 1996/10/18 Re: FCC SAR Requirement John Shinn
• 1996/10/18 Re: FCC SAR Requirement Lars Poulsen
• 1996/10/18 RE: ETSI Equipment Spatial Requirements Eric Petitpierre
• 1996/10/18 ETSI Equipment Spatial Requirements Jon D Curtis
• 1996/10/17 U of CO Telecom Hotlist Scott Roleson
• 1996/10/17 FCC SAR Requirement Tom Bao
• 1996/10/17 Re: Question: re U of CO Telecom Hotlist Victor L. Boersma
• 1996/10/17 Re: French BRI approval requirements BarryS
• 1996/10/17 Re: French BRI approval requirements Nick Hughes/GB/3Com
• 1996/10/17 Re: dBmargin Piet Thomassen
• 1996/10/17 re: Low Voltage Directive. BarryS
• 1996/10/16 Re: dBmargin David Spencer
• 1996/10/16 Oftel OTR 001 Issue 3 section X.9.2 Jon D Curtis
• 1996/10/16 Re: Status of prTBR 21 Jon D Curtis
• 1996/10/16 Re: dB margin Doug McKean
• 1996/10/16 Low Voltage Directive. Jon Bertrand
• 1996/10/16 dB margin Hans T. Mellberg
• 1996/10/16 Re: dBmargin BMCEWEN%A1 . URSA . mrgate
• 1996/10/16 Re: dBmargin BMCEWEN%A1 . URSA . mrgate
• 1996/10/16 Re[2]: dBmargin Eric Petitpierre
• 1996/10/16 Re: dBmargin ian (i.) chapman
• 1996/10/16 Re: dBmargin BarryS
• 1996/10/15 re: dBmargin -Reply Frank Stucki
• 1996/10/15 Re: dBmargin Doug McKean
• 1996/10/15 Re: dBmargin Cynthia Pleach
• 1996/10/15 Re: dBmargin Jon Griver
• 1996/10/15 FAQ: Sources of EMC and Safety Compliance Information (7th issue) Bill Lyons
• 1996/10/15 Re: dBmargin Gabriel Roy/HNS
• 1996/10/15 Re : db Margin. Chris Olliffe/Wat/GB/Cray_Communications
• 1996/10/15 Re: dBmargin Jon D Curtis

• Earlier messages
• Later messages