(that is,
allocation requests specified in the job's JCL).
Default: NO
This may bring your enqueue to the forefront and allow Operations to
recognize it more efficiently and cancel the test jobs.
Lizette Koehler
--
For IBM-MAIN
would still be typing now.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm
, you maybe able to remove the requirement of numbers
cols 1-8. That means no CNTL, TEXT, etc.. type of file. Make a new one,
like MYVB. So your new file might be called TSOID.JCL.MYVB
Lizette Koehler
--
For IBM-MAIN subscribe
.
Not sure if this helps. If I had a dump to look at, I could see if this
applies or not. If this is the case, then I would ask what has changed. Any
code changes, ptfs installed, the normal drill.
Lizette Koehler
.
Not sure if this helps. If I had a dump to look at, I could see if this
applies or not. If this is the case, then I would ask what has changed. Any
code changes, ptfs installed, the normal drill.
Lizette Koehler
Steve, you do not think that IBM would create a situation where they could
charge money to fix it? I thought not.
Lizette
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with
Gerry,
If you have SAS in shop, then try PROC SOURCE. It will unload a PDS and
create IEBUPDTE control cards in the offloaded file.
Lizette
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
that prevent you
from using this facility.
Don't forget to turn it off when you are done.
$TDEBUG,SECURITY=NO
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED
Willie,
If you look up the message ID (should be like an IEE message) with this
display you would find that it means that the dasd unit is offline. NRD
means not ready. So you need to have someone vary the device online. If
that does not work, then you would need to have someone do a display of
, and start and end messages.
Lizette Koehler
Looking for any alternative to redirect the joblog to mvs syslog when job
abend , Is it doable ?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
Is it possible that one user has a command defined on the LOGON PANEL
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
be
flushing the job and not JES or Converter?
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http
.
Personally, I would stay with a 7 char or less TSO ID. That way you can
avoid any gotcha code, processes, or products.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL
ID.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
I think if you are listing a level of data sets with LISTC you use
LISTC LEVEL(dataset name) Then it should produce an RC=0
I don't have a system to check this, but I think it is correct.
Lizette Koehler
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED
Has anyone checked to see if the $DPERFDATA(*) (I think that is it) command
would help? I don't have access to JES2 at the moment, but do remember
using it to get a vast amount of internal statistical data out of JES2 with
it.
Lizette Koehler
products that assist SMS in managing DASD, like PROSMS, you
could check with those vender(s) first.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message
it to the system, using an IMPORT CONNECT
command. The parameters are:
G87UCAT identifies the object to be disconnected.
DISCONNECT identifies the object as a user catalog. When a user catalog's
connector entry is to be deleted, DISCONNECT is required.
Lizette Koehler
-volume data sets being SMS defined as
multi-volume even though they were not multi-volume data sets and could not
be multi-volume.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL
? Or activated RACF security for
SDSF by activating the SDSF Resource Class? Is the SDSF Started Task
Running?
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED
Jason,
If you mean the basics -
z/OS V1R4.0 MVS Diagnosis: Tools and Service Aids
Otherwise, you could use the online bookmgr z/OS 1.4 bookshelf and search
for what you are looking for:
http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/Shelves/IEA2BK34
Lizette Koehler
--- Snip
What
If you use ISPVCALL you need to enter it twice. The first execution
collects the data and the second displays the output.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL
If my old addled brain is thinking correctly, I believe over 10 years ago
IBM decided to no longer be nice to programs and require that all programs
close any files they open. And if they did not close them, the system would
then issue a SC03 abend.
Or am I getting too forgetful???
Lizette
From what I recall, that message is okay. The performance guys at my shop
always made it overflow. That way they knew they did not have wasted space
in PLPA. So, AFAIK, unless there are new rules, I don't think this is an
issue.
Lizette Koehler
Well, if you have SAS, it can do it.
Otherwise IEBPTPCH can do it.
It all depends on the intent of the listing and the format you need.
There might even be something on the CBT tape that might provide you with a
PDS print function.
Lizette Koehler
that might have a FIX command in
it. See link: http://www.cbttape.org/freepds.htm
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
what a U0001 indicates. Or go to the
CICS list server and check with them or scan their archives.
CICS List [EMAIL PROTECTED]
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL
.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
not delete the entries. Just leave them on the volumes uncataloged?
Thanks for any insight.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET
?
Lizette Koehler
-Original Message-
From: Todd Blandford [EMAIL PROTECTED]
Sent: Sep 7, 2006 9:39 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Systems Programming Position - Raleigh/Durham NC
Hello all -
I have received permission to post this from the list owner.
We have an immediate opening
Here are the instructions from the DB2-L list.
Welcome to the IDUG DB2-L list.
To unsubscribe, go to the archives and home page at
http://www.idugdb2-l.org/archives/db2-l.html.
From that page select Join or Leave the list.
The IDUG DB2-L FAQ is at http://www.idugdb2-l.org.
The IDUG List
. (I was thinking you could just
drop the VOL= parm and realized that only if the data set resides on the SYSRES
volumes would that work).
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
of ADDVOL and DB2 extensions. I know at
some point, IBM correct the ADDVOL in DB2 to get another UCBEXT without have to
cycle or reorg the data base.
The DB2 List might have better information on this issue.
Lizette Koehler
I am facing problem in production DB2.
5 Volumes were configured
What kind of testing are you trying to do? There are date simulator
products like HOURGLASS or I think Compuware has one. With these products
your applications can pick a date and time to run in and not affect the rest
of the environment.
Lizette
-- Snip
Hi,
running z/OS V1.4
Need to refresh my memory on how to resize a couple data set pair. Ran into an
issue where I attempted to create a new policy for my CFRM and it died saying I
had more than 50 Structures
IXC736I THE LIMIT OF 50 STRUCTURES PER POLICY HAS
BEEN
The task you ran got an S878 which is usually a REGION size issue. You need
to make the region= parameter on this task BIGGER. You can use tools like
LOOKAT to find out what system abend or error messages mean.
Lizette Koehler
-Original Message-
From: IBM Mainframe Discussion List
I guess a couple of questions would be
What is the primary and secondary allocation?
From the listing it looks like the data set went to 16 extents and died.
Perhaps a change on the primary or secondary space allocation would be needed?
Lizette
I was going to use TRSMAIN to pack some SMF Data from TAPE data set to dasd for
FTP process. However the documentation for TRSMAIN states it cannot use tape.
I do not understand why this is the case. What is special about TRSMAIN and
tape processing. I would have thought it would just be
Joes can be dynamically increased with a $TOUTDEF command. I would also
investigate what was generating all the SYSOUT. JES2 creates one JOE for every
SYSOUT in a job. So if you have a SYSOUT=A and a SYSOUT=B that is 2 JOES for
that job. You also create jobs depending on the OUTPUT
Just one question.
Are your proclibs defined on the PROCLIB statement inside the JES2 Parms?
I think $TPROCLIB only works for them and not JCL'd Proclibs. If they are,
this will work okay. Though I would be the only TSO User Logged on during
this process incase there are any issues.
As for
I have a task to create monitoring reports on the CF and Structures in the CF
(DB2 Group Buffer Pools). Tools I have available are RMF, SMF, MXG (oh and
TMON).
What is the best way to create the reports that will show growth, activity,
etc... I am not a capacity planner so this is new to me.
While I was out of work for 18 months, I used MONSTER, HOTJOBS, and
Careerbuilder. I applied to all the positions I thought I qualified for,
but employers either never got back to me, had me out on an interview and
never got back to me, or said my skill set was too old (my last os at the
time was
While I'm waiting for a response from MVS-OE, can somebody here point me
to where the LE Installation Defaults are specified for z/OS UNIX? I
don't find it in either the z/OS UNIX doco or the LE doco. This is for
z/OS 1.5, btw.
TIA,
-jc-
The LE Options are tuned according to HEAPS,
How can I get your job
I had to move to South Carolina to get this gig. They will not even consider
work at a distance.
I asked my last boss if I could do full time work at home for the same salary I
got here and they said no.
So where is this wonderous, intellegent organization you work
Ok, here is a very basic question:
When I code the FILESEQ number on a Tape - it failes if I used hi order zeros.
So it will not take 0001 but will take 1. I did not remember this being a
restriction in JCL. At what point in the converter code would look at this and
not like 0001.
Resolution:
I had written a REXX exec for a DR process that would read the TMSGRW report
of volumes being taken to the DR site and generate a series of FDR Full Volume
Restores. I was unable to test the actual JCL and so made some BIIIGGG
asumptions.
The FileSeq number generated was a 5
The use of Volatile really (in my opinion) deals more with DB2 Data Sharing
than anything else. If you set the CF to Volatile YES - the DB2 Data Sharing
Regions put out a message
DSN7507I :DSNQ DSN7LSTK 737
SCA STRUCTURE DSNSB0Q_SCA IS ALLOCATED IN A
Here is my 2 cents worth.
The only issue here is whether or not the device is offline. If there is an
F it is offline. I believe the NRD is a throw back to the old days when you
could flip a switch that would READY or NOT READY the physical drive. That
is no longer valid with RAID, Shark and
I did not find a flyer. Can you let me know where on the web I can download it?
Thanks
Lizette
-Original Message-
From: August Carideo [EMAIL PROTECTED]
Sent: Oct 27, 2006 1:41 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Meeting in Parsippany
This just passed:
I wanted to let you
Anyone out there have customized TPX with logon scripts that can help me make
them work? CA has not been very helpful on this issue and I am losing my hair
(not really) over this.
I read the manuals and do not get very far because I am not VTAM or CICS fluent
(trying to make CICS Autoinstall
Not sure what your abend in SDSF is, but it is possible that the HASPINDX used
by SDSF is cluttered. See how many SYSLOG data sets you have out on SPOOL. I
think you can use the ST command and prefix SYSLOG. Or you can review the size
of the HASPINDX data set and you may need to increase the
Already a DB2-L newsgroup
Welcome to the IDUG DB2-L list. To unsubscribe, go to the archives and home
page at http://www.idugdb2-l.org/archives/db2-l.html. From that page select
Join or Leave the list. The IDUG DB2-L FAQ is at http://www.idugdb2-l.org.
The IDUG List Admins can be reached at
Found this on the news net and thought I would pass it along.
http://news.yahoo.com/s/ap/20061102/ap_on_bi_ge/software_sentence
By TOM HAYS, Associated Press Writer
20 minutes ago
NEW YORK - The former chief executive of Computer Associates International Inc.
was sentenced to 12 years
) Planning
Server Time Protocol (STP) Recovery Considerations (90 minute long session)
Server Time Protocol (STP) User Experiences Migrating to STP in the
Development Lab Server Time Protocol (STP) User Experience at a customer
Lizette Koehler
in JES2.
Lizette Koehler ([EMAIL PROTECTED])
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu
Could you be more specific? Are you looking to place these in a data set, or
print them as a unit? Or are you looking to change them with an OUTDEF parm
or similar function?
The JESMSGLG, JESSYSMSG, and JESJCL should all fall under the MSGCLASS parmeter.
Lizette
Hi
Is there any
We are planning to upgrade from z/OS V1.4 to V1.7. There has come up a concern
over having z/OS V1.7 Language Environment in the TEST/DEVL systems and not in
production. That programs compiled and LKED with the newer LE would have
issues running in the V1.4 LPARS.
I was thinking of just
I know you can specify D PROG,LPA,MOD=xx to see if a specific LPA Modules
is loaded.
There are probably some other tools that will do a more interrogation of LPA.
LIzette
--
For IBM-MAIN subscribe / signoff / archive
Thanks everyone.
I had read the manual and reviewed the processes. Unfortunately there are some
that are very nervous about this upgrade. I was just trying to find another
method that would make them feel warm and cozy. And to do that, I thought
keeping the SCEELKED* data sets back a level
Depending on this module, you might be able to temporarily move it to
another data set in the LINKLST and use it until you can get the
SYS1.LINKLIB fixed. But only if the fix is urgent enough to install. Or
look at MLPA as an alternative until you get SYS1.LINKLIB fixed. If it
isn't urgent,
Looking for a way to suppress Step Status messages from my master consoles.
Any suggestions?
A couple of other options, If you have an automation tool - Netview, Tivoli,
OPS/MVS, etc you can probably have that capture and not send the message to
the console, or talk sweet to your mvs
Is the VSAM dataset in a USER Cat that both systems can see?
If so, then you just need to make sure your SHROPTs are compatible with
mutliple systems view/update it.
Lizette
--
For IBM-MAIN subscribe / signoff / archive
I am looking to see if anyone is using the EMC DMX3000 box for the mainframe?
If so, are you using AUTOSWAP?
Just looking for some input. We are thinking of using it.
You can write me offline at [EMAIL PROTECTED]
Lizette
You might also want to check out the DTS software group. It has several
storage products like those described.
Lizette
Hello,
does anyone know similar products to CA-Vantage Storage Resource Manager ???
What CA-Vantage does is:
BrightStor CA-Vantage Storage Resource Manager manages, monitors
John,
Have you tried trying on tracing in JES2 for security? It might provide
ACF2 messages that could help in identifying this issue?
Lizette Koehler
- Original Message -
From: John C. Wolf [EMAIL PROTECTED]
Newsgroups: bit.listserv.ibm-main
To: IBM-MAIN@BAMA.UA.EDU
Sent: Tuesday
adopts a bill protecting them,
experts said Tuesday.
http://news.com.com/Telecommuters+Beware+the+tax+man/2100-1028_3-5927124.html
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
can omit the outer parentheses if you code only the first
subparameter.
° The RESTART parameter cannot have a null value.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions
Craig,
The hex 40C makes me think you have the length field incorrectly coded.
Should it be a COMP-3 field instead of a BINARY field?
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
before or after the /. However, there is another interesting (and new to
me) comment at:
publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/ceea5160/2.2.2.8.1
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive
, everything depends on what you want to do with halting your environment.
By init class, by member in a MAS or by specific types of jobs (INPUT,
CONVERTER, etc...)
Hope this helps.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff
set I am interested in.
Or issue LD PREFIX(md0006.tools) g
This will attempt to list any generic profiles
Of course you may not have necessary racf authority for listing everything.
Lizette Koehler
--
For IBM-MAIN subscribe
What is amazio? Is it suppose to be amazon?
Interfaces : For IBM Systems and Application Programmers 1999
FYI book aval now at amazio
Lizette
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
was actually generated by your system. Provide the output a couple of
lines before and after the area of interest.
Hope this helps,
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL
in any other queue under SDSF except for ST on that jobtask
name.
The dynamic SVC dump name would depend on your definition in your
environment. You can display the dumps via D D,ST (Display Dump,Status)
both dynamic dumps and SYS1.DUMPxx data sets will be displayed.
Lizette Koehler
CLIST and REXX execs that run in
Batch or TSO.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http
I got a little confused.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives
I was able to access both sites Steve. Not sure what your problem is ;-)
Lizette
For both of these URIs I got domain_name could not be found. Anyone
else have that problem?
Kind regards,
-Steve Comstock
--
For
to know any gottcha's that might hit me (taxes, FICA,
medical, etc.) that I have not thought of. The contract company tells me it
is W2 without benefits.
I appreciate any input. Please contact me at
[EMAIL PROTECTED]
Lizette Koehler
be more accessible.
Hope this helps.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http
for each
image, but during our roll out procedure, it was renamed to JES2 on the
target system. That way we could maintain all of our environments in one
staging Proclib.
Hope this helps.
Lizette Koehler
--
For IBM-MAIN subscribe
The HAPSINDX needs to be deallocated to all TSO sessions. What I do is use
the SDSF Server to move it.
Alter ISFPARMS to point to new HASPINDX
F SDSF,REFRESH
Ensure all TSO allocation to old file are gone. TSOENQ function is used to
do this.
Delete old file.
If you do not use the SDSF SERVER,
Pat,
You can create a dummy member called EPWHWR01 (hardware probes) by just
editing a member and put a * in column 1 (that is the comment card) and save
it.
Then try restarting FFST again.
Lizette Koehler
--
For IBM-MAIN
added something on the fly, did
not tell anyone and then BOOM we had a fun time trying to determine what
changed and how to back it out.
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
://www.idugdb2-l.org. The IDUG
List Admins can be reached at [EMAIL PROTECTED] Find out the
latest on IDUG conferences at http://conferences.idug.org/index.cfm
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access
It has been awhile since I had to trouble shoot this type of problem.
Does anyone know of a way in JES2/SDSF to identify the job that has produced a
significant number of JOEs?
I had a situation where we ran out of JOEs. Other than reviewing the entire
output queue manually, is there an
Hi all,
I seem to have forgotten what it means when the output from an IDCAMS LISTC
CAT('catname') has some of the information as (INVALID). And for some reason
it is eluding me when I review the SMS manauls
If you look at my output it has (INVALID) for entries like CI-SPLIT, CA-SPLIT
and
Thanks Mark. that is the answer I needed.
We are running z/OS V1.4 and this fits very nicely. We will be upgrading to
z/OS V1.7 by end of year. So I will probably just live with this anomaly for
now.
Lizette
Yes - install APAR OA11927.
Thanks,
Mark Thomen
Catalog/IDCAMS/VSAM
The Catalog was created before the IMBED was removed. Any catalog created with
IMBED before then would still show it in the listing. If you apply the apar
OA10952 and then do the EXPORT/IMPORT the IMBED will no longer be in the
listing.
You can consider it an artifact from when the catalog
an example of the control blocks I needed to chase and exclude (Exclude
STC, and TSU, only do it if Batch), but cannot find my notes. It would save
me some time if someone had it coded this way that I could borrow to make sure
I do not over shoot my goal for the exit.
Thanks in advance.
Lizette
I think there are actually a couple of solutions here.
1) Do not put user proclibs in JES2. Use the JCLLIB statement instead.
2) If you do put a user proclib in JES2 then make it with only primary
allocation and no seconday. Allow for growth. If it fills up then use the
JCLLIB statement
3)
Does anyone know if there is a way to reduce the amount of information DB2
feels it needs to dump when it requests an SVC Dump? We had MAXSPACE set at
4500M and it still was not enough.
I do have the Dump Data sets SMS managed and STRIPPED (extended format) so
that part should not be a
Thanks Sam, and everyone else.
We have no issue with the DASD part of the dump. I have that setup as
stripped. It is just the virtual dump I am having difficutly with. We have
limited storage and so our MAXSPACE can only go to about 4.5G. The 6G or 8G is
out of the question right now. I
I woudl probably verify what I dump to SYSMDUMP. You can do this with a D D,O
command.
You should see something like the following
IEE857I 10.13.16 DUMP OPTION 713
SYSABEND- ADD PARMLIB OPTIONS SDATA=(LSQA,TRT,CB,ENQ,DM,IO,ERR,SUM),
The only other area I might also consider is your backend tapes for the VTS
should you decide to add more virtual tapes. Make sure you have enough of
them to support any additions you might make to the VTS.
Lizette
There are two main ways to tackle this situation, and likely you will
need
Kees,
If you play around with this you could discover that a blank entry can
only be used in a very specific configuration. And I always do recommend
anyone with a question first start by playing with a construct (not the
production ones of course) and see what it does.
For example if you
Ed,
What are you trying to do in EXCEL that WORD will not do? I usually use the
WORD MAIL MERGE feature to create address lists.
You can mail merge EXCEL data into a WORD document to create Letters, mailers,
directories, etc.
Lizette
-Original Message-
From: Ed. Benoit [EMAIL
When I use DFDSS to download a volume or dataset(s) to be transferred to
another host, I always include BLKSIZE=32760 on the output file in DFDSS. Even
though DFDSS does not care, it does help my transfer process whether that is
NDM, XCOM, FTP.
If you terse the file you need to make sure you
Does any kind soul out there have a DISPATCH logon script for TPX ACL/E
language? I am running into issues and cannot seem to get my arms around a
solution. I have one user that seems to be already logged on but when we look
they are not logged on to DISPATCH. My script works for everyone
I can emulate the problem by using two different IDs to logon to TPX Sessions
and logging on with the same id in Dispatch.
So TPX Session one is logged on as USER1 adn TPX Session two is logged on as
USER2. I then logon to DISPATCH under both TPX sessions as USER1. This
creates the error
It is just odd that I only have one user that has this duplicate logon issue.
No one else here is reporting it.
I am trying to get more users on TPX. And hopefully we can see if this is
isolated or not.
Well, we have IPLs scheduled for this weekend so I will see if monday it is
cleared up.
601 - 700 of 1752 matches
Mail list logo
