- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, August 12, 2002 4:46 PM
Subject: Re: [PEDA] DXP Newsgroup
As far as I know this has not been designated a 'non-dxp' area :) :)
But seriously, I know the support people at Protel and
- Original Message -
From: Tony Karavidas [EMAIL PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Wednesday, August 14, 2002 11:08 PM
Subject: Re: [PEDA] Metric problems
I was poking around the website today and noticed this in one of the
'items fixed' in P99SE, SP4:
- Original Message -
From: Barry, Rick [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 30, 2002 4:44 PM
Subject: [PEDA] Modification of P P fields in Protel 99SE
I am unable to ascertain the method, if there is one, of modifying the
fields that I get when I generate a
From: Brad Velander [EMAIL PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Friday, August 30, 2002 4:58 PM
Subject: Re: [PEDA] Service Pack 7 vs DXP issues
Rob, could you explain your comments about the Cam Manager in DXP a
little better. Do you mean to say that every time you want
- Original Message -
From: Schmitt Michael [EMAIL PROTECTED]
To: Protel EDA Forum (E-Mail) [EMAIL PROTECTED]
Sent: Tuesday, September 03, 2002 10:52 AM
Subject: [PEDA] P99SESp6 polygons and gerber
I cant believe what i have seen today ... after the PCB manufactor has
reported errors
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, September 05, 2002 10:19 AM
Subject: Re: [PEDA] Hard Look at other Programms
I contacted several companies including a UK company called Tsien (spelt
like
that) and when I mentioned
- Original Message -
From: Brian Guralnick [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Tuesday, September 10, 2002 12:50 PM
Subject: Re: [PEDA] Protel clone on the way?!?!?!
The guys who made this web site should convert their screen shot .BMPs to
.PNGs. I gave up
- Original Message -
From: Terry Creer [EMAIL PROTECTED]
To: Protel EDA Forum (E-mail) [EMAIL PROTECTED]
Sent: Wednesday, September 11, 2002 3:21 AM
Subject: [PEDA] GTC - Guaranteed To Crash
I just discovered this.
I had all copper layers turned off, and only 2 Mechanical Layers and
- Original Message -
From: Matt Daggett [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, September 11, 2002 1:32 PM
Subject: [PEDA] Possible Spam...
Anyone getting possible KLEZ spam from the originating IP 64.229.233.168 and
with a return path only in the
- Original Message -
From: JaMi Smith [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Cc: JaMi Smith [EMAIL PROTECTED]
Sent: Tuesday, September 17, 2002 8:52 PM
Subject: Re: [PEDA] Placement Data
- Original Message -
From: John A. Ross [Design] [EMAIL PROTECTED
Dennis
Just small follow up
Flying probe test
Test voltage 250 V
Leak threshold 59 MOHS
Continuity test 200 MA
Resistance threshold 10 OHMS
Jig Test
Test voltage 40 V
Test current 100 MA
Low threshold 5 OHM
High threshold 250 * 10 KOHM
Best Regards
John A. Ross
RSD Communications Ltd
8
- Original Message -
From: Adeel Malik [EMAIL PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Friday, October 04, 2002 1:37 PM
Subject: [PEDA] Important Factors determining the cost of PCB Population
Hi All,
The recent thread on Board Population Houses has prompted
- Original Message -
From: Jun Gong [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]; Protel Developers
Forum [EMAIL PROTECTED]; Open Topic Forum
[EMAIL PROTECTED]
Sent: Wednesday, October 09, 2002 8:23 PM
Subject: [PEDA] flipping board
Hi, Any one knows how to flip a board in
- Original Message -
From: Thomas [EMAIL PROTECTED]
To: Protel Data Forum (E-mail) [EMAIL PROTECTED]
Sent: Monday, October 28, 2002 6:37 AM
Subject: [PEDA] [OT] Highway Robbery
$1200 AUS for the two day Protel 99SE Simulation Training course!
Plus airfares, plus accommodation, do these
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, November 07, 2002 8:47 PM
Subject: [PEDA] Pick Place Data
I just got a call from a client who is having issues with an assembly
house
over the pick place file generated by Protel.
- Original Message -
From: Joe Sapienza [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, November 07, 2002 10:11 PM
Subject: Re: [PEDA] Is forum traffic down?
Seems very slow lately
I think everyone is switching over to DXP
The traffic on DXP lists is pretty
Jami
1. Should I install an anti-virus program?
Of course you should, especially if the workstation shares time with
internet access and/or email. But remember, it is a safety cushion, not a
cure/solution.
The choice of vendors would be yours.
Norton has had more than its fair share of
Ivan / Tim
With respect
If you are going to base a quote on my response you missed out something
I said earlier in the same email
But remember, it is a safety cushion, not a cure/solution.
If you had read this, in the context it was intended you could have saved a
lot of typing.
Of course
things off-line. Too much traffic, not enough
Protel related content.
You really need to define your own security policy, and then see what
solutions best fit your enviroment needs.
:-)
John
- Original Message -
From: John A. Ross [Design] [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL
- Original Message -
From: Bagotronix Tech Support [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Tuesday, November 12, 2002 8:50 PM
Subject: Re: [PEDA] Antivirus Software Memory Issues
bag deploys, and you crash. Except it's even worse than that - it's like
an
air
- Original Message -
From: JaMi Smith [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Cc: JaMi Smith [EMAIL PROTECTED]
Sent: Tuesday, November 12, 2002 9:15 PM
Subject: [PEDA] The othe half of DXP?
Now you know where your ATS money went.
I wonder if it comes with ATS.
Jami
Regardless of the board size the synchroniser DOES take more time than
just generating a netlist import to PCB in the same design.
My designs are not physically big, but pretty dense, and made out of
many SCH sheets as we heavily re-use a lot of sheet 'blocks' for system
level re-design block
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 27, 2003 9:19 AM
To: Protel EDA Forum
Subject: Re: [PEDA] copies don't update
In regards to these sorts of issues ... and others when they
come up. Are
the members on this list interested in
Dave
All I get out of it is run time error 13 type mismatch.
Is the procedure just open file, load csv and go?
Best Regards
John A. Ross
RSD Communications ltd
Email [EMAIL PROTECTED]
WWWhttp://www.rsd.tv
==
-Original Message-
From: [EMAIL
Robert
I think you are being a bit hard here and overly critical of Protel
tools, if the tools were so bad why has Zarlink (Mitel, GPS) used them
for so long.
Some of your statements below show a certain unfamiliarity with the
tools which would be pre-requisite knowledge for a fair and honest
A. Ross
[Design]To:
Protel EDA Forum [EMAIL PROTECTED]
[EMAIL PROTECTED] cc
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 26, 2003 9:14 AM
To: Protel EDA Forum
Subject: [PEDA] Attachments (BOM sorter)
I think the attachment rejection still works on attachments
greater then a certain size, since an example file
-Original Message-
From: Peder K. Hellegaard [mailto:[EMAIL PROTECTED]
Sent: Monday, June 30, 2003 10:31 AM
To: [EMAIL PROTECTED]
Subject: [PEDA] Template for the PCIX standard
Hi
Anyone who has a template for the PCI X bus or know where to find it.
Peder
I might be wrong
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
Sent: Friday, July 11, 2003 4:14 PM
To: Protel EDA Forum
Subject: Re: [PEDA] PowerPCB Pads ?
Dennis
See below
how easy is the creation of footprints in Pads ?
(the proper name for the current version is PowerPCB
-Original Message-
From: Brian Guralnick [mailto:[EMAIL PROTECTED]
Sent: Friday, July 11, 2003 7:49 PM
To: Protel EDA Forum
Subject: [PEDA] OT: DB9 RS-232 serial port on peripherals.
Hi,
I was wondering what the pinouts of a peripheral's female
RS-232 DB9 connection.
-Original Message-
From: Brad Velander [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 22, 2003 8:24 PM
To: Protel EDA Forum List Server (E-mail)
Subject: [PEDA] P99SE Sheet Symbol Port connectivity across sheets.
Hi all,
well I finally had to break my normal pattern of
Best Regards
John A. Ross
RSD Communications ltd
Email [EMAIL PROTECTED]
WWWhttp://www.rsd.tv
==
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, July 25, 2003 3:33 PM
To: Protel EDA Forum
Subject: [PEDA]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2003 8:31 AM
To: Protel EDA Forum
Subject: Re: [PEDA] 99SE places hidden components
Hi Abd and Ian,
unfortunately that does not work. I tried to do just what you
suggested, but it
-Original Message-
From: Tim Fifield [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2003 4:24 PM
To: Protel EDA Forum
Subject: [PEDA] DXP switch
Well, I've been informed that I'm going to be switching to
DXP. Does anybody have any words of wisdom to make this
switch a
-Original Message-
From: Terry Creer [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 30, 2003 12:09 AM
To: 'Protel EDA Forum'
Subject: [PEDA] Analysing...
Hi all,
I've just been handed a rather large board with quite a
few individual GND polygons on it (35 to be exact).
-Original Message-
From: Bagotronix Tech Support [mailto:[EMAIL PROTECTED]
Sent: Friday, August 08, 2003 8:02 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Autoreply: someone set this thing to
stop rebroadcasting Au to replies --
It seems Mr. Watts has invented an
-Original Message-
From: Brian Guralnick [mailto:[EMAIL PROTECTED]
Sent: Friday, August 08, 2003 7:16 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Discovery - LAN Network pasue hiccup patch.
As far as I am aware the 'free' version of ZA is only licenced for
'home'
or
'non'
Tim
I also found it beneficial in some cases to export all the files out of
the database, create a new one, import the files back into the new
database and carry on from there.
I know it's a bit of work that should not be needed, but form my point
of view it is better than risking losing the
-Original Message-
From: Tim Fifield [mailto:[EMAIL PROTECTED]
Sent: Monday, August 25, 2003 4:28 PM
To: Protel EDA Forum
Subject: [PEDA] Geometric Center
Does anybody know how Protel 99SE calculates the geometric
center (Mid x,y) in the pick and place files?
Tim
As far as I
-Original Message-
From: Hodne, Hakon [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 26, 2003 10:01 AM
To: [EMAIL PROTECTED]
Subject: [PEDA] Updating libraries from database
I'm using nVisage DXP for schematic capture. I know how to
connect and update schematics from a
-Original Message-
From: Joe McCauley [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 03, 2003 12:10 PM
To: Protel EDA Forum
Subject: [PEDA] Joining 2 different nets keeping seperate identifiers?
I need to have a current return line with 3mm thickness. This
line has a net
-Original Message-
From: Steve Wiseman [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 04, 2003 12:14 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Prototype Assembly House - now assembly guides
Since I'm evidently not the only person to still be hand assembling,
here's a
-Original Message-
From: Stephen Casey [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 11, 2003 12:50 PM
To: Protel forum
Subject: [PEDA] Board fabricator in UK/EU
Hello,
I have a requirement for a slightly unusual PCB. Does anybody
(preferably in the UK) know of a fab
Due to time constraints I need to issue one of our partner companies
with a netlist rather than a completed board.
They use MG Board station as their layout tool.
Has anyone used the Board station V6 netlister in 99SE successfully?
Or can offer any advice on re-formatting or combining the
-Original Message-
From: Abd ul-Rahman Lomax [mailto:[EMAIL PROTECTED]
Sent: Monday, September 15, 2003 11:58 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Mentor Board Station Netlister
At 12:48 AM 9/14/2003, John A. Ross wrote:
Like most of the netlisters in 99SE and DXP they
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent: Friday, September 19, 2003 1:41 AM
To: Protel EDA Forum
Subject: Re: [PEDA] P99SE has Altzheimers' ?
..snip.. I deleted a whole lot of more contentious stuff,
enough grenades
for today.
Ian
My comments were
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent: Friday, September 19, 2003 1:47 AM
To: Protel EDA Forum
Subject: Re: [PEDA] P99SE has Altzheimers' ?
I think some of you are thinking I am supporting Altium in
this. I try to
be honest, analytical and
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent: Friday, September 19, 2003 1:40 AM
To: Protel EDA Forum
Subject: Re: [PEDA] P99SE has Altzheimers' ?
Snipped
I would love to get together, face to face, computer to
computer with a
very experienced OrCad,
==
- Original Message -
From: John A. Ross [Design] [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Friday, September 19, 2003 7:02 AM
Subject: Re: [PEDA] P99SE has Altzheimers' ?
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent
-Original Message-
From: Website Visitor [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 24, 2003 9:11 AM
To: proteledaforum
Subject: [PEDA] Trace Width Charts
Hi there,
I'm still a bit green when it comes to layouts. Was hoping
someone more experienced could point me
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 30, 2003 3:55 PM
To: [EMAIL PROTECTED]
Subject: [PEDA] creating power planes
I am working on a four layer board and I have been unable to
figure out how to get the internal ground and
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 07, 2003 11:34 AM
To: [EMAIL PROTECTED]
Subject: [PEDA] Keepouts
Hi,
I wish to prevent a polygon from pouring in a certain area.
I have used a fill as a keepout on that layer, but I
-Original Message-
From: Michael Binning [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 07, 2003 11:53 AM
To: Protel EDA Forum
Subject: [PEDA] Part Field entries
Hello all,
I hope somebody can help me out with this one.
I have created a button in one of my toolbars for
-Original Message-
From: Michael Biggs [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 09, 2003 6:48 PM
To: 'Protel EDA Forum'
Subject: [PEDA] oblong Pads/Slots (plated) in P99SE
I have noticed in P99SE component library that you cannot
change the hole size to be a oblong or
-Original Message-
From: Laurie Biddulph [mailto:[EMAIL PROTECTED]
Sent: Monday, October 27, 2003 6:20 AM
To: [EMAIL PROTECTED]
Subject: [PEDA] Joining nets
We have a pcb that has both analog and digital circuits and
consequently we have assigned a ground to each type (AGND
Prompted by Ivans comments below and my own curiosity as to what we are
waiting for,
Who else would like to see an Altium on-line demo or multimedia
presentation on what LiveDesign actually is?
If we are going to have to dump DXP in favour of waiting for Protel 2004
with LiveDesign, I do not
After a quick search for LiveDesign I came across this article
http://www.eetuk.com/bus/news/OEG20031119S0001
A few quotes from it, but please read the article for yourself,
It is essentially the same methodology they would use to create a pc
board design, but now the platform is an FPGA, said
-Original Message-
From: Mike Ingle [mailto:[EMAIL PROTECTED]
Sent: Friday, November 21, 2003 4:11 PM
To: Protel EDA Forum
Subject: [PEDA] pick and place report
Hi all,
This job will be my first where a pick and place machine is
used. I have some confusion regarding bottom
-Original Message-
From: Mr. Zhang Yangtian [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 03, 2003 11:51 AM
To: Protel??
Subject: [PEDA] Who can give me some materials about
multi-channel design?
I am using the option of multi-channel design of protelDXP.
But from the
-Original Message-
From: Rene Tschaggelar [mailto:[EMAIL PROTECTED]
Sent: Saturday, December 06, 2003 2:18 PM
To: Protel EDA Forum
Subject: Re: [PEDA] double pins
I'm usually coming from the Update design, update footprint,
... This time I also tried to create and load a netlist
-Original Message-
From: Laurie Biddulph [mailto:[EMAIL PROTECTED]
Sent: Monday, January 05, 2004 6:33 AM
To: Protel EDA Forum
Subject: [PEDA] Transparent footprints
Hi, I hope you all had a happy Xmas.
I need to place two large components on a pcb that will
actually be on
-Original Message-
From: Steve Smith [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 07, 2004 4:09 PM
To: [EMAIL PROTECTED]
Subject: [PEDA] Schematic Symbol Import
Is there a way to import Mentor or EDIF schematic symbols
into DXP? I have found schematic symbols on
A. Ross [Design] [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 08, 2004 4:54 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Schematic Symbol Import
-Original Message-
From: Steve Smith [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 07, 2004 4:09 PM
To: [EMAIL PROTECTED
-Original Message-
From: Dom Bragge [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 29, 2004 5:23 AM
To: protel
Subject: [PEDA] TO-220 4th pin?
I just would like to ask a question about how you handle
TO-220 footprints ( the like)...
I have the three (electrical) pin
-Original Message-
From: Protel Hell [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 04, 2004 2:39 PM
To: [EMAIL PROTECTED]
Subject: Re: [PEDA] Synchroniser won't recognise components
are the rules for email different outside the U'S.?
You mean like this? :-)
I did not think
Just my $0.02
My Protel 99 SCH files actually show as 'Microsoft Schedule+
Application' association
My Protel 99 PCB files actually show as 'PowerPCB Design' association
I have Win AutoUpdate disabled
I have Capture 9.2 installed, Plogic, PowerPcb and some others.
Only time I ever have an issue
-Original Message-
From: Kiba Dempsey [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 18, 2004 1:17 PM
To: [EMAIL PROTECTED]
Subject: [PEDA] DXP review
Does anyone know where I can find any independent reviews on
the DXP software?
There has been some notes, comments, gripes
-Original Message-
From: Dave C [mailto:[EMAIL PROTECTED]
Sent: Saturday, February 21, 2004 12:20 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Complex Hierarchy to PCB layout ?
John,
Well, thanks a lot, really. That is a very good suggestion,
it makes a lot of sense. It still
-Original Message-
From: Dom Bragge [mailto:[EMAIL PROTECTED]
Sent: Friday, March 05, 2004 1:21 AM
To: Protel EDA forum
Subject: [PEDA] company schematic libraries
I just wish to ping you on how you setup your own company
schematic libraries. There seem to be so many ways to
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent: Friday, March 05, 2004 2:41 AM
To: Protel EDA Forum
Subject: Re: [PEDA] company schematic libraries
Snip
I call this the one-part, one-symbol system.
It sounds like work but it is not hard to manage - unless
Just an observation of mine,
I think Mr Lomax already suggested that the manuals would probably be
better written by users, rather than developers, and he is most likely
correct.
The precious little snippets of info that would make a new users life so
much easier are most often missing, as the
Ian,
My last post looks like a reply to you, it wasn't, it was just easier to
reply to a post than create a new message.
I just forgot to delete the original post, sorry.
Best Regards
John A. Ross
RSD Communications ltd
Email [EMAIL PROTECTED]
WWWhttp://www.rsd.tv
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 10, 2004 1:49 AM
To: Protel EDA Forum
Subject: Re: [PEDA] 2004 DXP Looks Great,
On 12:16 PM 10/03/2004, DUTTON Phil said:
Bill,
My DXP is still in
the box.
..snip..
snipped
Some
.
On 12:21 AM 11/03/2004, John A. Ross [Design] said:
..snip..
When the DDB came out is was almost universally denigrated.
Then lots of people went quiet about it and now we have
admissions that people liked it.
(I am not saying you were one of the people that changed view
over time; I
.
On 12:21 AM 11/03/2004, John A. Ross [Design] said:
..snip..
In a single user or workstation environment where the whole
design is
driven/managed by one person, it is workable and very flexible, an
improvement, but start expanding it to other users, then the project
system without CVS
-Original Message-
From: Ray Mitchell [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 10, 2004 5:36 PM
To: [EMAIL PROTECTED]
Subject: [PEDA] Common PCB footprint specifications
Hello,
I'm sure this is a repeat, but is there a simple
specification readily available that gives
Ray
I know your pain, I started off life as a designer, then a layout
engineer and after working with a lot of sub contractors did my bit in
process engineering, then in service/manufacturing doing failure
analysis and feeding that back to design where I ended up (again) and
due to the experience
-Original Message-
From: Leo Potjewijd [mailto:[EMAIL PROTECTED]
Sent: Monday, March 15, 2004 4:03 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Mouse insists first click is a double-click
At 15-03-2004 16:09, Carpenter, Dean wrote:
Hi All -
OK, this is an odd one ... Recently
-Original Message-
From: Paresh Pai [mailto:[EMAIL PROTECTED]
Sent: Monday, March 29, 2004 8:43 AM
To: protel forum
Subject: [PEDA] reg hole on PCB and library
Hi everybody.
I am facing the following problems in 99SE
1. I have designed a single sided PCB for a
Jami
A printed version is at the rear of the Nanoboard tech manual
The design is located in the P2004 examples sub directory
C:\P2004\Examples\Reference Designs\NanoBoard-NB1
In my case its C:\2004\ so just change to wherever yours is.
Best Regards
John A. Ross
RSD Communications ltd
Email
FYI, I reside in the UK but spend a lot of working time also in Sweden
and Germany, not so much in China/Korea any more as those operations are
well up and running now.
US orientated, political nomenclature means little to me although I
guess, I better get used to it for NAB next weekend if I
-Original Message-
From: Mike Reagan [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 14, 2004 4:56 PM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] Need more software
snip
Camtastic is a step in the right direction. Again I don't
like the integration. Specifically, I don't like
-Original Message-
From: Protel Hell [mailto:[EMAIL PROTECTED]
Sent: 11 May 2004 20:08
To: [EMAIL PROTECTED]
Subject: Re: [PEDA] OT: Mentor PADS comparison
keep in mind with PADS 2004 you have the option to use Orcad,
PowerLogic, and ViewDraw as the schematic capture. depending
-Original Message-
From: Michael Biggs [mailto:[EMAIL PROTECTED]
Sent: Monday, May 10, 2004 4:20 PM
To: Protel EDA Forum
Subject: [PEDA] DataBase Size too big!
After designing a PCB in 99SE SP6 and my database file keeps
getting bigger. Of coarse I always save different file
Hi
I have had a few discussions previously on this list about the
connectivity models within 99SE and how I have had in some cases seen
errors where power ports are not treated as global when using Sheet
Symbols/Port connections.
Before committing the last of my larger designs to 2004 I would
Does anyone else use this method for keeping top sheets clean in 99SE?
See screenshot http://www.proteluser.com/bbs/showthread.php?p=71#post71
If you look at net labels HA[0..18], HD[0..15] and HA20/HA21/WE0 you
will see that I have added additional sheet entries of the same name
while using
: [PEDA] Sheet entry methodologies in 99SE
At 04-05-2004 16:48, John A. Ross [Design] wrote:
Does anyone else use this method for keeping top sheets
clean in 99SE?
See screenshot
http://www.proteluser.com/bbs/showthread.php?p=71#post71
If you look at net labels HA[0..18], HD[0..15
-Original Message-
From: Abd ulRahman Lomax [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 06, 2004 5:08 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Connectivity - Netlist issues
At 07:14 PM 5/5/2004, John A. Ross [RSDTV] wrote:
From: Abd ul-Rahman Lomax [mailto:[EMAIL
-Original Message-
From: Abd ulRahman Lomax [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 06, 2004 5:35 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Connectivity - Netlist issues
At 07:51 PM 5/5/2004, John A. Ross [RSDTV] wrote:
snip
There is a bit of pressure on me just now on
-Original Message-
From: Peter Moreton [mailto:[EMAIL PROTECTED]
Sent: 17 May 2004 12:48
To: [EMAIL PROTECTED]
Subject: [PEDA] TO-263 and TO-220 footprints?
Hi, I am trying to create a simple PCB using Protel 99SE, and
am nearly there, but cannot seem to find footprints for an
-Original Message-
From: Abd ulRahman Lomax [mailto:[EMAIL PROTECTED]
Sent: 18 May 2004 18:33
To: Protel EDA Forum
Subject: Re: [PEDA] Flipping a PCB layout - 99SE
snip
If the old track does not form a loop with the new, it will
be left in place. This is not an antenna
-Original Message-
From: Darren [mailto:[EMAIL PROTECTED]
Sent: 24 June 2004 06:01
To: [EMAIL PROTECTED]
Subject: [PEDA] How to open OrCAD schematics in Prote DXP?
Greetings.
Does anyone know of the best way to translate OrCAD
schematics to Protel?
My understanding is that
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent: 25 June 2004 02:06
To: [EMAIL PROTECTED]
Subject: [PEDA] DXP/P2004 comment - storing views
A while ago there was a discussion about P2004 not doing much
for PCB designers. This is a note on a small feature to
-Original Message-
From: Leon Heller [mailto:[EMAIL PROTECTED]
Sent: 28 June 2004 07:15
To: Protel EDA Forum
Subject: Re: [PEDA] Recommendations please! -- DXP2004 - PADS
- Expedition
- Original Message -
From: Tom Hausherr [EMAIL PROTECTED]
To: 'Protel EDA Forum'
-Original Message-
From: RogerHead [mailto:[EMAIL PROTECTED]
Sent: 16 July 2004 03:45
To: Protel EDA Forum
Subject: Re: [PEDA] Ver 3.x -- 99SE or DXP??
Hi John,
You said
In some ways it is actually functionally better but I prefer
to view it
without all the WinXP
-Original Message-
From: Terry Creer [mailto:[EMAIL PROTECTED]
Sent: 21 July 2004 03:42
To: 'Protel EDA Forum'
Subject: [PEDA] FW: Shortcuts in 99SE ?
Apologies for the double post, but I just read Page 30 of the
manual a little closer and it mentions this linking process,
but
Terry
Do you mean like described here http://www.altium.com/protel/kb/kb_item.asp?ID=2117
here ?
Then I guess the changes I seen below are the addition ional wrapper ? Makes more
sense now.
John
PDF to start with is say from line 1 line 10
%PDF-1.2
%
8 0 obj
/Length 9 0 R
Dennis, Terry
Sorry, my mistake, guess I should go back to sleep now :-)
John
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
Sent: 21 July 2004 16:59
To: Protel EDA Forum
Subject: Re: [PEDA] Shortcuts in 99SE ?
John,
we are talking about shortcuts or
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
Sent: 28 July 2004 02:24
To: Protel EDA Forum
Subject: Re: [PEDA] 99SE SP6 updating footprints
i'm sure this has been discussed (?)
but i just noticed the following in 99SE PCB
if you have several or more
-Original Message-
From: Leo Potjewijd [mailto:[EMAIL PROTECTED]
Sent: 29 July 2004 10:12
To: Protel EDA Forum
Cc: 'Protel EDA Forum'
Subject: Re: [PEDA] 99SE SP6 updating footprints
At 28-7-2004 22:23, John A. Ross [RSDTV] wrote:
If say
PCB editor is open with MYLIB library
1 - 100 of 106 matches
Mail list logo
