Title: Onstream FW30 - Error 105 Device Problem
Does anyone know what to make of an Error 105 - Device Problem? We're using
an Onstream FW30 drive. The problem seems to occur only when a backup is
scheduled, not when it is done on-demand. Originally we were running Mac OS
8.6 and old FireWire
Does anyone know what to make of an Error 105 - Device Problem? We're using
an Onstream FW30 drive. The problem seems to occur only when a backup is
scheduled, not when it is done on-demand. Originally we were running Mac OS
8.6 and old FireWire drivers. We updated to Mac OS 9.04 and FireWire
Title: Re: Onstream FW30 - Error 105 Device Problem
Where can I find Firewire Drivers 2.5?
Jeff
--
Jeff Grossman ([EMAIL PROTECTED])
Director - Information Systems, Turner's Outdoorsman
http://www.turners.com
From: Phil Geller [EMAIL PROTECTED]
Reply-To: retro-talk [EMAIL PROTECTED]
Date
on 3/5/01 11:21 AM, "Jeff Grossman" [EMAIL PROTECTED] wrote:
Where can I find Firewire Drivers 2.5?
Jeff
The obvious place: Apple.com
http://asu.info.apple.com/swupdates.nsf/artnum/n11838?OpenDocument
-jon
--
If you come from a Perl or PHP background, JSP is a way to take
your pain to
-2/28/2001 11:02:17 PM: Copying Susan McBride on Susan McBride
Couldn't write Snapshot, error -36 (i/o error, bad media?)
2/28/2001 11:22:11 PM: 1 execution errors
Completed: 2479 files, 1.7 GB
Performance: 85.2 MB/minute
Duration: 00:19:54 (00:00:13 idle/loading
On 3/1/2001 7:37 AM, "Brian Caskey" wrote:
The computer works great, except for this
little problem. Looking at the restore options, the snapshots look fine, and
I can restore files, even from the backups that are generating errors. But
still, I get this error every morning...and
Hello,
Sometimes the Disk First Aid utility and even Norton can not detect the -36
error.
Apple's Drive Setup does not do a "low level format" on IDE hard disks,
which means that bad blocks (-36 errors) will not be fixed by using the
format option in Drive Setup. Zero all da
Greetings all.
Just in the last couple of days, one of my Windows clients has started
returning the following error message:
"Can't access volume DISK (C:) on WIN_CLIENT, error 5 (unknown)"
The client computer is running Windows 98 with Retro client 5.1 for
windows.
The back
Here's an oddity. I used to get a lot of 519 errors when I had DAT
tape changers, but since switching to DLT I hardly have any problems
and the problems I do have are directly related to the end users
machine.
I ran DLT on a mixed 10BaseT with Hubs and switches for about 6
months before I
Just encountered a bad situation. I had turned off file and mail
servers on my ASIP server to run a RS backup. During the backup
something happened and RS shows a 519 error and of course quit
backing up. Upon checking on the server, I discovered that it was
running just fine, but no longer
Just in the last couple of days, one of my Windows clients has started
returning the following error message:
"Can't access volume DISK (C:) on WIN_CLIENT, error 5 (unknown)"
The client computer is running Windows 98 with Retro client 5.1 for
windows.
Anytime I have retro n
copied all the Retrospect stuff
to make it the new machine. I've immediately got this 519 error backing up
my own G4.
The old Retro backup machine was a beige G3-266 desktop, motherboard 10T
Ethernet, running 9.0.4. The new machine is a beige G3-300 desktop, Asante
10/100 card, 9.0.4, and usi
(say 40 MB/min vs 50) but it does work.
A timely thread! I just today moved our DAT drive (HP SureStore DDS-3
external) from one machine to another, and copied all the Retrospect stuff
to make it the new machine. I've immediately got this 519 error backing up
my own G4.
We have 519's like a
On 2/20/2001 6:45 AM, "Nicholas Froome" wrote:
We have 519's like a rash when backing up over a mixed 10/100 network using
3Com SuperStack 10/100 autoswitching hubs. Backup server is a beige G3 266
tower with a DDS-2 DAT drive.
Take a look at the autosensing on the Macs. There is an update
Back in November I started a thread on problems we were having
getting G4s to backup over our 10Mb Ethernet network...
Just to update everyone, we have found that switching the clients to
AppleTalk rather than TCP/IP has eliminated all the errors we were
experiencing (As suggested by Brooks
Wasn't it retro-talk who once said...
Subject: Re: -24007 error backing up NT server
From: "Irena Solomon" [EMAIL PROTECTED]
Date: Wed, 10 Jan 2001 12:05:49 -0800
Also ensure that all files have the security permissions set to allow read
access or higher to admi
10, 2001 5:49 AM
To: RetroTalk
Subject: -24007 error backing up NT server
I'm using Retrospect 4.3 on a Mac to backup almost all of the
computers
on my network. Among these is an NT 4.0 server (service pack
6a). I've
configured the Macshare volumes per Dantz's recommendations, but I am
directory that seems to generate a -24007 "Access denied" error. I
could find no reference to this error at Dantz's site, so I thought I'd
check with the list. I'm no NT whiz by any means, so be gentle. I do know
the basics of setting permissions and such. I've checked all of those I
don
ies dialog for the
shared folder.
Other than that, I'm not sure.
Joel Moore
-Original Message-
From: NetHead [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 10, 2001 8:49 AM
To: RetroTalk
Subject: -24007 error backing up NT server
I'm using Retrospect 4.3 on a Mac to backup
, but I am
having problems with some of the non-Mac spaces. There is in fact one
whole directory that seems to generate a -24007 "Access
denied" error. I
could find no reference to this error at Dantz's site, so I
thought I'd
check with the list. I'm no NT whiz by any means, so b
On Tue, 28 Nov 2000, David Ross wrote:
If you look at how ethernet works, most of time anything you do will
mask errors. EtherNet has error recovery built in. So an undemanding
transfer, such as a Finder copy, will tend to get through, errors or
not. It's those programs that really hammer
that my experience so far
does not support. I've had no known network failures of any kind -
except Retrospect. To simply say that I will have one day is dodging
the issue.
If you look at how ethernet works, most of time anything you do will
mask errors. EtherNet has error recovery built in. So
At 6:53 AM -0600 24/11/00, Don Foy wrote:
I want
everything perfect for a backup, since a less than perfect backup is
absolutely useless. That one byte it missed and didn't tell me about may
have been in the middle of a file that could cost me several thousands
dollars.
I agree, but in that
re manages to work despite
this. If Retrospect could report the problem, but continue to get the
backup done then that would be OK.
Retrospect is NOT a network diagnostic tool. If it was then it should
at least tell me where the fault lies, not just report some nebulous
'network communica
r the long delay is because the
MRJ files are compressed and I have Virex to scan compressed files.
After turning off "Scan Compressed files" on my problematic machines,
I haven't seen a 519 error ever since. WAH!
Reliable means one thing, Ken--you can restore with confidence. Network
to let the backups go a little
longer, but supposedly the G4 is failing again to get backed up.
Has anyone tried putting a new NIC into a G4 instead of using the on
board ethernet as a way to resolve this problem?
Todd Reed
On 11/24/00, Glenn L. Austin emailed about "Re: G4s and erro
At 9:02 AM -0800 26/11/00, Eric Ullman wrote:
he was
fairly certain that the problem was a bug in Retrospect.
I hope you understand that is NOT what I have been suggesting.
I need to finish rebuilding my network then I can give it a good
testing with a variety of backup servers, MacOS9 (X
I'm having the same type of problem with a lone G4 on a small
network. The other systems there, a blue G3, a beige tower G3 plus a
clone and a 6100, all seem to get backed up without fail.
[snip]
Just another data point:
We have 7 G4's here (early PCI to newest AGP) on our network here on
Adrian.
The termination problem was on the client, which is an ASIP server. It just
took out that particular client. However, if there is a termination problem
on the Retrospect 'server' then I guess you could see 519 errors.
It sounds like you need to talk with the folks at Retrospect in
on 11/23/00 2:09 PM, Ken Gillett at [EMAIL PROTECTED] wrote:
So Retrospect reports errors that it finds in the network setup that
doesn't affect ANYTHING else? If these errors existed then why does
nothing else complain? I'm sure that it does hit the network hard,
but IMO it should be
So Retrospect reports errors that it finds in the network setup that
doesn't affect ANYTHING else? If these errors existed then why does
nothing else complain? I'm sure that it does hit the network hard,
but IMO it should be written to cope with that. It should not the
task of the customer
So Retrospect reports errors that it finds in the network setup that
doesn't affect ANYTHING else? If these errors existed then why does
nothing else complain?
Yet.
I copy large files from one machine to another, but that never fails
Yet.
If it is a SCSI problem, then shouldn't
At 8:00 PM -0800 11/22/00, retro-talk wrote:
We are having problems backing up G4s over the network.
Basically, they get part way through the backup and then Retrospect
looses the connection. The problem seems to be at the G4 end as once
this has happened they have lost network
error, what actually occurs that causes
Retrospect to report it and how come it requires a restart of the Mac
in order to get its network running again?
At 5:27 PM + 22/11/00, Nicholas Froome wrote:
How much data are you backing up? Is the problem intermittent? Does
it happen on any other
on 11/23/00 6:50 AM, Ken Gillett at [EMAIL PROTECTED] wrote:
Just what is the 519 error, what actually occurs that causes
Retrospect to report it and how come it requires a restart of the Mac
in order to get its network running again?
Before the guys at Dantz get back from the holiday, I'll
everything, all the time, and
will find problems wherever they lie.
If 519 is, at it seems to be, a generic error, then how do we find the cause(s)? It
seems to me that they present a problem only if their frequency undermines the
successful completion of a backup. On a setup (as I described) that can't
If you are having 519 errors, there is a problem in your setup, either
hardware, software or network. You most likely either have a SCSI problem
(which was the case the last time I had a 519, termination problems),
Don, what were the other symptoms when you had the termination
problem? Did it
if this was related to
the server of client. In fact I don't know if the 519 error is client
induced or resides solely in the server. Since this can occur with
all the clients it points to the server, but this is the third Mac
I've tried it on If it is a SCSI problem, then shouldn't
having.
One Windows NT client gives me an error when I try to access it from the
server. When I hit the "refresh" button, I get an error that say's "Client
speed test failed, error 5 (unknown)". When I hit the "volumes" button, I
get an error that say's "Can't
We are having problems backing up G4s over the network.
Basically, they get part way through the backup and then Retrospect
looses the connection. The problem seems to be at the G4 end as
once this has happened they have lost network connectivity until
the next restart (sleep and waking
appens then. There's an unsupported tool to do this - check the Apple site.
How much data are you backing up? Is the problem intermittent? Does it happen on any
other machines? As a percentage, what proportion of the backups (of the G4s) fail?
In a client's setup we found the problem (error 519) to be
Mmmm. OK, check the connection speed and duplex setting to the
hub/switch in Apple System Profiler.
Hmm, You know, this one got me. I was not aware of any program that
would get speed and duplex on a Mac.
I just checked Apple System Profiler (version 2.4.4) and it don't
show me. Maybe
Mmmm. OK, check the connection speed and duplex setting to the hub/switch in Apple
System Profiler.
Hmm, You know, this one got me. I was not aware of any program that would get speed
and duplex on a Mac.
I just checked Apple System Profiler (version 2.4.4) and it don't show me. Maybe
I'm a different person than who brought up the initial issue. I was
asking this for my information. Thanks!
The Macs I have are older and they do not have the 10/100 built in.
Beige G3/300 and a 9600/G4-450.
Mmmm. OK, check the connection speed and duplex setting to the
hub/switch in
matt barkdull wrote:
Mmmm. OK, check the connection speed and duplex setting to the
hub/switch in Apple System Profiler.
Hmm, You know, this one got me. I was not aware of any program that
would get speed and duplex on a Mac.
I just checked Apple System Profiler (version 2.4.4) and it
Hi all,
We are having problems backing up G4s over the network.
Basically, they get part way through the backup and then Retrospect
looses the connection. The problem seems to be at the G4 end as once
this has happened they have lost network connectivity until the next
restart (sleep
Hi All,
I recently inherited a Windows NT network running Retrospect Server v 5.0.
This is my first experience with Retrospect, so I was hoping to get someone
to point me in the right direction with 2 problems I'm having.
One Windows NT client gives me an error when I try to access it from
I've seen this when the volume containing the catalogs is almost full
and the save after the backup is completed fails. Also if the directory
of this volume is corrupted.
--
--
To subscribe:[EMAIL PROTECTED]
To unsubscribe: [EMAIL
.
-Original Message-
From: David Ross [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 15, 2000 9:23 AM
To: retro-talk
Subject: Re: Daily Problems with out of Sync Error messages...
I've seen this when the volume containing the catalogs is almost full
and the save after the backup is completed
Searchable Knowledgebase at:
http://partners.dantz.com:591/faq/
Subject: Daily Problems with out of Sync Error messages...
Howdy,
We have been dealing with an anooying problem where our backup is going out
of sync every day.
We have looked at the Service and Support pages
Re: Error 541- Backup client not installed or not running
I get this error quite a bit but it is intermittent? One night backups may
work fine and the next night I may get this error on one of my volumes?
We are using a central backup server with an HP Surestore 818 Library
attached
Hi Ben,
I had a look through some of Microsoft's online resources, and this sounds
like a network error that is reported by Windows, not Retrospect. Depending
on the context of the error, it may indicate several things; I'd recommend
searching for the 10054 error at Microsoft's Knowledgebase
o continue the incremental backup it
brought up
an Error 212 message. When I tried to retrieve data from the tape it
appeared
to rewind to the correct spot and start to retrieve the document, but then
stops and again brings the error 212 message.
On the advice of several different people, I mov
On Fre, 3. Nov 2000, 2:26:50 Uhr GMT Chad S. Chelius wrote:
The first step I would take in troubleshooting this situation would be to
isolate the SCSI bus. Are there more than 1 SCSI device on the Adaptec
SCSI
bus? Is your VXA drive terminated properly? One other option would be to
Hi,
Is there a *complete* list of error codes produced by Retrospect for
the Mac available anywhere?
In our backups last night, I see two codes that I don't recognise:
can't erase/format media (112)
unknown service command (510)
These don't seem to be listed in the manual, or the online error
that folks are experiencing. I
have found Ecrix to be most responsive to folks with certain
configurations who can help them debug their drives.
Jim Coefield
[EMAIL PROTECTED]
Subject: Error 212, VXA, Retrospect 4.3
From: "David Weeks, weeks.de" [EMAIL PROTECTED]
Date: Fri, 03 Nov 200
that's already in the drive. This tape is now marked as
"gelöscht" which is German for erased or deleted. When this first happened I
ejected the tape and put it straight back in the machine and it appeared to
recognise it but when I tried to continue the incremental backup it brought up
Maybe it would be better if Retrospect "recognized" the file it
itself had messed with and would silently ignore that particular
error on that particular file.
Just seems fairly logical to me to NOT report that as an error.
D
At 2:18 PM -0500 10/5/00, Fuzzy Gerdes wrote:
Anyone ever seen this one before?
Can't access volume Backup Folder for Text Files on FMP_SERVER, error -517
(backup client is busy)
9/14/2000 1:03:55 AM: Execution incomplete
We are backing up a Macintosh client to an NT machine in the middle of the
night. None of the files we're backing up
with verification work just fine,
no errors. Testing the Restore function yields the following error
message:" Sorry, restore preparation failed, error-24201 (chunk
checksum didn't match)"
Retrospect recently upgraded from 4.1 to 4.3. No problems backing up
to or restoring from existing
Can't access volume Backup Folder for Text Files on FMP_SERVER, error -517
(backup client is busy)
9/14/2000 1:03:55 AM: Execution incomplete
Anyone ever seen this? We are backing up a Macintosh client to an NT
machine in the middle of the night. None of the files we're backing up are
open
I tried it and it worked.
Thanks Irena
- Original Message -
From: "Irena Solomon" [EMAIL PROTECTED]
To: "retro-talk" [EMAIL PROTECTED]
Sent: Thursday, August 24, 2000 6:40 PM
Subject: Re: Error
You're probably receiving error -1017 when running automatically be
Doug Hinschberger (me) quoted
I tried repairing the catalog, but it was taking too long, so I decided I
would try and skip using the 1-Fourth Friday tape, and have Retrospect
use new media, naming it 2-Fourth Friday. When I tried I received this
message:
The tape cannot be added to this
You're probably receiving error -1017 when running automatically because the
Retrospect Launcher service (the service that allows Retrospect to
autolaunch) is configured to log in as a user that does not have access to
this network volume (I'm assuming this is a Microsoft Networking volume
I've got a Blue White G3 running AppleShare IP 6.2. I'm backing up
to a LaCie AIT2 tape. Since I upgraded to Retrospect 4.3 (this
evening) I can't backup to it. I get [Device trouble "tape name",
error 102 (trouble communicating)].
I can still erase and eject tapes etc. The G3 is r
.
About once every 3 weeks I get an error -1101 and I lose the catalog file.
Although I have added several tapes to the tape backup set. The error is:
"Can't access backup set . error -1101 (file/directory not found)"
The catalog on disk becomes corrupt I can't reload the
Hello all,
I run a nightly backup using Retrospect 5.11 on a Win2k Server machine
(member server only). I backup a mixed (Mac and Win) bunch of clients.
Generally backups are going good (no major errors), yet I get sometime
error 1017 - insufficient permissions on some of the Mac files. Nothing
Hi,
We have a problem running our backup with Mac OS X Server 1.2 using
Retrospect 4.2.
The Server is a Mac G4 Server at 450 MHz and should be backed up from a
usual Macintosh running Mac OS 8.6.1 having mounted the servervolume.
Sometimes "error -5000 : no privileges" occurs,
plans for OS X
support, please see
http://www.dantz.com/index.php3?SCREEN=pr_osx
That said, here's what I generally write to users experiencing error -5000.
Please contact us via one of the methods below if you have questions, though
as I said, your configuration is currently unsupported
Eric,
You can always ensure the readability of your backup sets by running a
verify. This is not the same as compare, but it reads back all of your files
from your discs and makes sure they are all readable and therefore
retrievable. This is under ToolsVerify.
Error 100 occurs because
I'm having trouble backing up to my (Fantom FireWire)Plextor 8/4/32A
recently supported through 4.3. It seems that after most clients are backed
up and after the compare I get the following error. If I run the same script
again it will zip through the same place fine and move on the the next
Gotta love that explanation. Well I know it says to contact tech support but
what the heck. I got a error 212 (media erased)..long story short ... NOW
WHAT?!!? hmmm. maybe I should call tech support... hey Matt ring ring
ring
It's a VXA drive- internal on a G3, Adaptec card and a whole
Title: RE: Aarrggh! 519 error...-Spanning Tree Protocol?
If it is the Spanning Tree Protocol causing the problem then you have two alternative courses of action -
1. Disable it entirely, or
2. Enable Portfast at the Switch
The STP problem only affects Appletalk on the G3's G4's, because
Title: RE: Aarrggh! 519 error...-Spanning Tree
Protocol?
Thanks, but STP is disabled, and the problem
still occurs even when I set up retrospect on an old PPC
601.
I firmly believe its an incompatibility between
protocols retrospect uses and the HP 2424m
HP have been helpful in supplying
David,
If the error occurs when this drive is connected to three different
machines, and you've tried multiple cables and terminators, I'd look toward
a drive problem. However, make sure you've cleaned the drive heads and tried
the drive without the other SCSI device(s). I'm assuming
All of a sudden our daily backup is failing with this message. Anyone
have an idea what it means or how to fix it? Restarting the client
machine did resolve the problem but I'd like to know the source of
the problem.
Thanks,
___Joe___
--
Hi, remember a while ago, i had a 519 net retry error that i couldn't
work out...
Well it turns out that it appeared when we upgraded our central
network Lantech switch to a HP Procurve 2424m and i could only back
up any machines on the network if i avoided going through the HP
switch.
I
Hi, remember a while ago, i had a 519 net retry error that i
couldn't work out...
[...]
I have found a workaround: if I turn on Link Encryption on each
client everything runs smoothly!
[...]
can anyone explain this?
Link encryption might slow down the client and server enough that the
network
I've done some reconfiguring of our backups, and I'm getting an error
message that I can't find listed anywhere.
The error number is -33 (directory full). It also says it can't save
the snapshot. I've got tons of disk space (this is a HD file), so I
don't think that's the issue, unless
ot; [EMAIL PROTECTED]
To: "retro-talk" [EMAIL PROTECTED]
Sent: Thursday, July 13, 2000 1:20 PM
Subject: Odd error message
I've done some reconfiguring of our backups, and I'm getting an error
message that I can't find listed anywhere.
The error number is -33 (directory full). It als
13 Jul 2000 13:20:57 -0400
To: "retro-talk" [EMAIL PROTECTED]
Subject: Odd error message
I've done some reconfiguring of our backups, and I'm getting an error
message that I can't find listed anywhere.
The error number is -33 (directory full). It also says it can't save
the snapsho
if your HD file is near 2 GB in size, that's your problem. The limit is 2Gb
for storage set files, per Retrospect's manual.
Cesar
At 01:20 PM 7/13/00 -0400, you wrote:
I've done some reconfiguring of our backups, and I'm getting an error
message that I can't find listed anywhere.
The error
I also get the 519 error. I do agree that it is certain files that are
causing Retrospect to error out. I have gotten around this by subdivide
my script this let's my backup complete; however, when users connect to
the remote client server after the backups run the server crashes. I
must reboot
Was there some other sypmtom involved? In the past, when I have gotten that error, it
was usually because the drive had not released the tape properly. It could also be a
misreported error, or there is a tape not loaded properly.
Hello:
I recently installed an HP DD3 Autoloader (external
Did not include much information in my original post. For the moment,
it appear that there was a DDS-4 tape mixed in with the DDS-3 tapes.
Everytime the loader got to the DDS-4, it ejected the entire caddy.
Removing this tape seemed to have corrected the error.
nme
Was there some other
Hi it turns out my 519 -Net retry error is actually caused by files
on the client that cannot be backed up.
If i remove the file the backup continues till it finds another. Each
mac on my net seems to have at least a couple of these problematic
files...
l.
--
---
Lindsay
Interestingly enough, I have many computers that back up fine
when I use an Adaptec AHA-2906 (5MB/sec controller) SCSI controller
in the server. I upgraded the controller to a 2940UW (40MB/sec
controller) and now I get -519 errors on 1/3 of both mac and PC
clients. I'm guessing that
it doesn't appear to be a network problem at all.
when i created a backupset on the hard drive i could backup a fast G4
no problemo
its only when i backup to a tape backupset...
Lindsay,
Since you mentioned that the tape drive is new and that backing up to a
file on the G4 is working ok, I'm
Or a SCSI terminator or ID number:)
Derek.
it doesn't appear to be a network problem at all.
when i created a backupset on the hard drive i could backup a fast G4
no problemo
its only when i backup to a tape backupset...
Lindsay,
Since you mentioned that the tape drive is new and that
Hi can you please help, i'm bashing my head on a brick wall...
i have retrospect 4.2 on a blue and white G3 acting as a backup server.
recently i noticed 4 clients were always giving a 519 network
communication failed error each night.
each mac is otherwise fine, and we have a large busy
At 03:14 PM 6/19/2000 +1200, you wrote:
Hi can you please help, i'm bashing my head on a brick wall...
...
I've reinstalled the scsi drivers, reverted to the mac OS 9 base
extension set, reinstalled Retrospect
what to do next???
Next step: Get the tech note from the web page.
I am experiencing a similar problem. Please specify which tech note on
what web page. In fact, a URL would be helpful and appreciated
Thanks.
Cal
Joy Richards wrote:
At 03:14 PM 6/19/2000 +1200, you wrote:
Hi can you please help, i'm bashing my head on a brick wall...
...
error 519
Joy
--
--
To subscribe:[EMAIL PROTECTED]
To unsubscribe: [EMAIL PROTECTED]
Archives:http://list.working-dogs.com/lists/retro-talk/
Problems?: [EMAIL PROTECTED]
Joy, thanx, but already got that, i've been right through it...
it doesn't appear to be a network problem at all.
when i created a backupset on the hard drive i could backup a fast G4
no problemo
its only when i backup to a tape backupset...
what to do next???
Next step: Get the tech
go through all the possibilities in the tech note? It's as
thorough as it gets in a tech note and an excellent reference to test the
519 error for causes.
The only thing I'd suggest you do at this point is to contact Tech Support,
either via the web page or by phone. (Try the web page first
Hi all,
Here is a tough question:
What is
MapError: unknow Windows Error 2,273
TSessInfo::MessageBufferSend: UNetMessageBufferSend failed, winerr 2273,
error - 1001
and
MapError: unknow Windows error 2,310
TPCVol::ServerForceDisk: UNetShareDel failed, E:\, winerr 2310, error -1001
We
Adam,
You are indeed receiving a hardware error. The sense code doesn't tell us
too much more than the error description does--basically that there has been
a hardware failure. I'd recommend consulting Dantz Tech Note 306,
"Recovering from Error 206, Media Failure," at
http://www
This might be a little OT for the Retrospect list. Can you be a little more specific?
Is the zip cartridge they are inserting the same cart. they are using for backups?
Is Retrospect running when the error messages comes up? If these are two different
carts., do they have the same name
What's an "Error 505...Client is reserved" mean?
--
--
To subscribe:[EMAIL PROTECTED]
To unsubscribe: [EMAIL PROTECTED]
Archives:http://list.working-dogs.com/lists/retro-talk/
Problems?: [EMAIL PROTECTED]
I don't use the back-up server -thing since I don't know how to make a
scheduled recykle backup. The storagesets keep growing and growing for the
laptops.
We currentley back up to a harddrive where the storagesets can't be larger
than two GB, remember.
Here's how you do it.
Write
1 - 100 of 109 matches
Mail list logo